linux-kernel - [PATCH v1 12/24] drivers: thermal: tsens: Don't print error message on -EPROBE

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <999576e731dfc32bdd382ebb6506bf3d8f4f79e9.1549525708.git.amit.kucheria@linaro.org>
Date:   Thu,  7 Feb 2019 16:19:30 +0530
From:   Amit Kucheria <amit.kucheria@...aro.org>
To:     linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        bjorn.andersson@...aro.org, edubezval@...il.com,
        andy.gross@...aro.org, Daniel Lezcano <daniel.lezcano@...aro.org>,
        David Brown <david.brown@...aro.org>,
        Zhang Rui <rui.zhang@...el.com>
Cc:     linux-pm@...r.kernel.org
Subject: [PATCH v1 12/24] drivers: thermal: tsens: Don't print error message on -EPROBE_DEFER

We print a calibration failure message on -EPROBE_DEFER from
nvmem/qfprom as follows:
[    3.003090] qcom-tsens 4a9000.thermal-sensor: version: 1.4
[    3.005376] qcom-tsens 4a9000.thermal-sensor: tsens calibration failed
[    3.113248] qcom-tsens 4a9000.thermal-sensor: version: 1.4

This confuses people when, in fact, calibration succeeds later when
nvmem/qfprom device is available. Don't print this message on a
-EPROBE_DEFER.

Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org>
---
 drivers/thermal/qcom/tsens.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index b91a0b88d33c..057b33353ba3 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -159,7 +159,8 @@ static int tsens_probe(struct platform_device *pdev)
 	if (priv->ops->calibrate) {
 		ret = priv->ops->calibrate(priv);
 		if (ret < 0) {
-			dev_err(dev, "tsens calibration failed\n");
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "tsens calibration failed\n");
 			return ret;
 		}
 	}
-- 
2.17.1