| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <7321469b300f99b94f2039606a42e1cec1fe63a5.1549630193.git.christophe.leroy@c-s.fr>
Date: Fri, 8 Feb 2019 12:52:20 +0000 (UTC)
From: Christophe Leroy <christophe.leroy@....fr>
To: Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Paul Mackerras <paulus@...ba.org>,
Michael Ellerman <mpe@...erman.id.au>,
Nicholas Piggin <npiggin@...il.com>
Cc: linux-kernel@...r.kernel.org, linuxppc-dev@...ts.ozlabs.org
Subject: [PATCH v1 02/16] powerpc/32: Refactor EXCEPTION entry macros for
head_8xx.S and head_32.S
EXCEPTION_PROLOG is similar in head_8xx.S and head_32.S
This patch creates head_32.h and moves EXCEPTION_PROLOG macro
into it. It also converts it from a GCC macro to a GAS macro
in order to ease refactorisation with 40x later, since
GAS macros allows the use of #ifdef/#else/#endif inside it.
And it also has the advantage of not requiring the uggly "; \"
at the end of each line.
This patch also moves EXCEPTION() and EXC_XFER_XXXX() macros which
are also similar while adding START_EXCEPTION() out of EXCEPTION().
Signed-off-by: Christophe Leroy <christophe.leroy@....fr>
---
arch/powerpc/kernel/head_32.S | 99 +---------------------------------
arch/powerpc/kernel/head_32.h | 118 +++++++++++++++++++++++++++++++++++++++++
arch/powerpc/kernel/head_8xx.S | 98 +---------------------------------
3 files changed, 122 insertions(+), 193 deletions(-)
create mode 100644 arch/powerpc/kernel/head_32.h
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 146385b1c2da..9410e5490c33 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -37,6 +37,8 @@
#include <asm/export.h>
#include <asm/feature-fixups.h>
+#include "head_32.h"
+
/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
#define LOAD_BAT(n, reg, RA, RB) \
/* see the comment for clear_bats() -- Cort */ \
@@ -242,103 +244,6 @@ __secondary_hold_spinloop:
__secondary_hold_acknowledge:
.long -1
-/*
- * Exception entry code. This code runs with address translation
- * turned off, i.e. using physical addresses.
- * We assume sprg3 has the physical address of the current
- * task's thread_struct.
- */
-#define EXCEPTION_PROLOG \
- mtspr SPRN_SPRG_SCRATCH0,r10; \
- mtspr SPRN_SPRG_SCRATCH1,r11; \
- mfcr r10; \
- EXCEPTION_PROLOG_1; \
- EXCEPTION_PROLOG_2
-
-#define EXCEPTION_PROLOG_1 \
- mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \
- andi. r11,r11,MSR_PR; \
- tophys(r11,r1); /* use tophys(r1) if kernel */ \
- beq 1f; \
- mfspr r11,SPRN_SPRG_THREAD; \
- lwz r11,TASK_STACK-THREAD(r11); \
- addi r11,r11,THREAD_SIZE; \
- tophys(r11,r11); \
-1: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */
-
-
-#define EXCEPTION_PROLOG_2 \
- stw r10,_CCR(r11); /* save registers */ \
- stw r12,GPR12(r11); \
- stw r9,GPR9(r11); \
- mfspr r10,SPRN_SPRG_SCRATCH0; \
- stw r10,GPR10(r11); \
- mfspr r12,SPRN_SPRG_SCRATCH1; \
- stw r12,GPR11(r11); \
- mflr r10; \
- stw r10,_LINK(r11); \
- mfspr r12,SPRN_SRR0; \
- mfspr r9,SPRN_SRR1; \
- stw r1,GPR1(r11); \
- stw r1,0(r11); \
- tovirt(r1,r11); /* set new kernel sp */ \
- li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
- MTMSRD(r10); /* (except for mach check in rtas) */ \
- stw r0,GPR0(r11); \
- lis r10,STACK_FRAME_REGS_MARKER@ha; /* exception frame marker */ \
- addi r10,r10,STACK_FRAME_REGS_MARKER@l; \
- stw r10,8(r11); \
- SAVE_4GPRS(3, r11); \
- SAVE_2GPRS(7, r11)
-
-/*
- * Note: code which follows this uses cr0.eq (set if from kernel),
- * r11, r12 (SRR0), and r9 (SRR1).
- *
- * Note2: once we have set r1 we are in a position to take exceptions
- * again, and we could thus set MSR:RI at that point.
- */
-
-/*
- * Exception vectors.
- */
-#define EXCEPTION(n, label, hdlr, xfer) \
- . = n; \
- DO_KVM n; \
-label: \
- EXCEPTION_PROLOG; \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- xfer(n, hdlr)
-
-#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret) \
- li r10,trap; \
- stw r10,_TRAP(r11); \
- li r10,MSR_KERNEL; \
- copyee(r10, r9); \
- bl tfer; \
-i##n: \
- .long hdlr; \
- .long ret
-
-#define COPY_EE(d, s) rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr) \
- EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full, \
- ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr) \
- EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
- ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr) \
- EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
- ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr) \
- EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
- ret_from_except)
-
/* System reset */
/* core99 pmac starts the seconary here by changing the vector, and
putting it back to what it was (unknown_exception) when done. */
diff --git a/arch/powerpc/kernel/head_32.h b/arch/powerpc/kernel/head_32.h
new file mode 100644
index 000000000000..7456e2a45acc
--- /dev/null
+++ b/arch/powerpc/kernel/head_32.h
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __HEAD_32_H__
+#define __HEAD_32_H__
+
+#include <asm/ptrace.h> /* for STACK_FRAME_REGS_MARKER */
+
+/*
+ * Exception entry code. This code runs with address translation
+ * turned off, i.e. using physical addresses.
+ * We assume sprg3 has the physical address of the current
+ * task's thread_struct.
+ */
+
+.macro EXCEPTION_PROLOG
+ mtspr SPRN_SPRG_SCRATCH0,r10
+ mtspr SPRN_SPRG_SCRATCH1,r11
+ mfcr r10
+ EXCEPTION_PROLOG_1
+ EXCEPTION_PROLOG_2
+.endm
+
+.macro EXCEPTION_PROLOG_1
+ mfspr r11,SPRN_SRR1 /* check whether user or kernel */
+ andi. r11,r11,MSR_PR
+ tophys(r11,r1) /* use tophys(r1) if kernel */
+ beq 1f
+ mfspr r11,SPRN_SPRG_THREAD
+ lwz r11,TASK_STACK-THREAD(r11)
+ addi r11,r11,THREAD_SIZE
+ tophys(r11,r11)
+1: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */
+.endm
+
+.macro EXCEPTION_PROLOG_2
+ stw r10,_CCR(r11) /* save registers */
+ stw r12,GPR12(r11)
+ stw r9,GPR9(r11)
+ mfspr r10,SPRN_SPRG_SCRATCH0
+ stw r10,GPR10(r11)
+ mfspr r12,SPRN_SPRG_SCRATCH1
+ stw r12,GPR11(r11)
+ mflr r10
+ stw r10,_LINK(r11)
+ mfspr r12,SPRN_SRR0
+ mfspr r9,SPRN_SRR1
+ stw r1,GPR1(r11)
+ stw r1,0(r11)
+ tovirt(r1,r11) /* set new kernel sp */
+ li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR) /* can take exceptions */
+ MTMSRD(r10) /* (except for mach check in rtas) */
+ stw r0,GPR0(r11)
+ lis r10,STACK_FRAME_REGS_MARKER@ha /* exception frame marker */
+ addi r10,r10,STACK_FRAME_REGS_MARKER@l
+ stw r10,8(r11)
+ SAVE_4GPRS(3, r11)
+ SAVE_2GPRS(7, r11)
+.endm
+
+/*
+ * Note: code which follows this uses cr0.eq (set if from kernel),
+ * r11, r12 (SRR0), and r9 (SRR1).
+ *
+ * Note2: once we have set r1 we are in a position to take exceptions
+ * again, and we could thus set MSR:RI at that point.
+ */
+
+/*
+ * Exception vectors.
+ */
+#ifdef CONFIG_PPC_BOOK3S
+#define START_EXCEPTION(n, label) \
+ . = n; \
+ DO_KVM n; \
+label:
+
+#else
+#define START_EXCEPTION(n, label) \
+ . = n; \
+label:
+
+#endif
+
+#define EXCEPTION(n, label, hdlr, xfer) \
+ START_EXCEPTION(n, label) \
+ EXCEPTION_PROLOG; \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ xfer(n, hdlr)
+
+#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret) \
+ li r10,trap; \
+ stw r10,_TRAP(r11); \
+ li r10,MSR_KERNEL; \
+ copyee(r10, r9); \
+ bl tfer; \
+i##n: \
+ .long hdlr; \
+ .long ret
+
+#define COPY_EE(d, s) rlwimi d,s,0,MSR_EE
+#define NOCOPY(d, s)
+
+#define EXC_XFER_STD(n, hdlr) \
+ EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full, \
+ ret_from_except_full)
+
+#define EXC_XFER_LITE(n, hdlr) \
+ EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
+ ret_from_except)
+
+#define EXC_XFER_EE(n, hdlr) \
+ EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
+ ret_from_except_full)
+
+#define EXC_XFER_EE_LITE(n, hdlr) \
+ EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
+ ret_from_except)
+
+#endif /* __HEAD_32_H__ */
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index ca9207013579..083f27f383b4 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -33,6 +33,8 @@
#include <asm/export.h>
#include <asm/code-patching-asm.h>
+#include "head_32.h"
+
#if CONFIG_TASK_SIZE <= 0x80000000 && CONFIG_PAGE_OFFSET >= 0x80000000
/* By simply checking Address >= 0x80000000, we know if its a kernel address */
#define SIMPLE_KERNEL_ADDRESS 1
@@ -123,102 +125,6 @@ instruction_counter:
.space 4
#endif
-/*
- * Exception entry code. This code runs with address translation
- * turned off, i.e. using physical addresses.
- * We assume sprg3 has the physical address of the current
- * task's thread_struct.
- */
-#define EXCEPTION_PROLOG \
- mtspr SPRN_SPRG_SCRATCH0, r10; \
- mtspr SPRN_SPRG_SCRATCH1, r11; \
- mfcr r10; \
- EXCEPTION_PROLOG_1; \
- EXCEPTION_PROLOG_2
-
-#define EXCEPTION_PROLOG_1 \
- mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \
- andi. r11,r11,MSR_PR; \
- tophys(r11,r1); /* use tophys(r1) if kernel */ \
- beq 1f; \
- mfspr r11,SPRN_SPRG_THREAD; \
- lwz r11,TASK_STACK-THREAD(r11); \
- addi r11,r11,THREAD_SIZE; \
- tophys(r11,r11); \
-1: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */
-
-
-#define EXCEPTION_PROLOG_2 \
- stw r10,_CCR(r11); /* save registers */ \
- stw r12,GPR12(r11); \
- stw r9,GPR9(r11); \
- mfspr r10,SPRN_SPRG_SCRATCH0; \
- stw r10,GPR10(r11); \
- mfspr r12,SPRN_SPRG_SCRATCH1; \
- stw r12,GPR11(r11); \
- mflr r10; \
- stw r10,_LINK(r11); \
- mfspr r12,SPRN_SRR0; \
- mfspr r9,SPRN_SRR1; \
- stw r1,GPR1(r11); \
- stw r1,0(r11); \
- tovirt(r1,r11); /* set new kernel sp */ \
- li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
- mtmsr r10; \
- stw r0,GPR0(r11); \
- lis r10, STACK_FRAME_REGS_MARKER@ha; /* exception frame marker */ \
- addi r10, r10, STACK_FRAME_REGS_MARKER@l; \
- stw r10, 8(r11); \
- SAVE_4GPRS(3, r11); \
- SAVE_2GPRS(7, r11)
-
-/*
- * Note: code which follows this uses cr0.eq (set if from kernel),
- * r11, r12 (SRR0), and r9 (SRR1).
- *
- * Note2: once we have set r1 we are in a position to take exceptions
- * again, and we could thus set MSR:RI at that point.
- */
-
-/*
- * Exception vectors.
- */
-#define EXCEPTION(n, label, hdlr, xfer) \
- . = n; \
-label: \
- EXCEPTION_PROLOG; \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- xfer(n, hdlr)
-
-#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret) \
- li r10,trap; \
- stw r10,_TRAP(r11); \
- li r10,MSR_KERNEL; \
- copyee(r10, r9); \
- bl tfer; \
-i##n: \
- .long hdlr; \
- .long ret
-
-#define COPY_EE(d, s) rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr) \
- EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full, \
- ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr) \
- EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
- ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr) \
- EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
- ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr) \
- EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
- ret_from_except)
-
/* System reset */
EXCEPTION(0x100, Reset, system_reset_exception, EXC_XFER_STD)
--
2.13.3
Powered by blists - more mailing lists