[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190208132954.28166-1-andrejs.cainikovs@netmodule.com>
Date: Fri, 8 Feb 2019 13:31:00 +0000
From: Andrejs Cainikovs <Andrejs.Cainikovs@...module.com>
To: Wolfgang Grandegger <wg@...ndegger.com>,
Marc Kleine-Budde <mkl@...gutronix.de>,
"David S . Miller" <davem@...emloft.net>,
"linux-can@...r.kernel.org" <linux-can@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC: Patrick Zysset <Patrick.Zysset@...module.com>
Subject: [PATCH 0/2] D_CAN RX buffer size improvements
Re-sending entire patchset due to missed cover letter, sorry.
This patchset introduces support for 64 D_CAN message objects with an option of
unequal split between RX/TX.
The rationale behind this is that there are lots of frame loss on higher bus
speeds. Below are test results from my custom Sitara AM3352 based board:
Sender: timeout 15m cangen can0 -g 0 -i x
Target: candump can0,0~0,#FFFFFFFF -td -c -d -e
* Without patches:
- 15 minute RX test, 500kbps
- 16 RX / 16 TX message objects
- 77 received frames lost out of 4649415
* With patches applied:
- 15 hours RX test, 500kbps
- 56 RX / 8 TX message objects
- 41 received frames lost out of 279303376
Please note, I do not have ability to test pure C_CAN, so it is left untested.
---
Andrejs Cainikovs (2):
can: c_can: support 64 message objects for D_CAN
can: c_can: configurable amount of D_CAN RX objects
drivers/net/can/c_can/Kconfig | 20 ++++++++++
drivers/net/can/c_can/c_can.c | 93 +++++++++++++++++++++++++++----------------
drivers/net/can/c_can/c_can.h | 20 +++++++---
3 files changed, 94 insertions(+), 39 deletions(-)
---
2.11.0
Powered by blists - more mailing lists