[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20190211161718.23785-1-nava.manne@xilinx.com>
Date: Mon, 11 Feb 2019 21:47:18 +0530
From: Nava kishore Manne <nava.manne@...inx.com>
To: <atull@...nel.org>, <mdf@...nel.org>, <robh+dt@...nel.org>,
<mark.rutland@....com>, <michal.simek@...inx.com>,
<rajanv@...inx.com>, <jollys@...inx.com>, <nava.manne@...inx.com>,
<linux-fpga@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <chinnikishore369@...il.com>
Subject: [PATCH v3 1/3] firmware: xilinx: Add fpga API's
This Patch Adds fpga API's to support the Bitstream loading
by using firmware interface.
Signed-off-by: Nava kishore Manne <nava.manne@...inx.com>
---
Chnages for v3:
-Created patches on top of 5.0-rc5.
No functional changes.
Changes for v2:
-Added Firmware FPGA Manager flags As suggested by
Moritz.
Changes for v1:
-None.
Changes for RFC-V2:
-New Patch.
drivers/firmware/xilinx/zynqmp.c | 46 ++++++++++++++++++++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 12 ++++++++++
2 files changed, 58 insertions(+)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 9a1c72a..366441a 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -469,6 +469,50 @@ static int zynqmp_pm_ioctl(u32 node_id, u32 ioctl_id, u32 arg1, u32 arg2,
arg1, arg2, out);
}
+/*
+ * zynqmp_pm_fpga_load - Perform the fpga load
+ * @address: Address to write to
+ * @size: pl bitstream size
+ * @flags:
+ * BIT(0) - Bit-stream type.
+ * 0 - Full Bitstream.
+ * 1 - Partial Bitstream.
+ *
+ * This function provides access to pmufw. To transfer
+ * the required bitstream into PL.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_fpga_load(const u64 address, const u32 size,
+ const u32 flags)
+{
+ return zynqmp_pm_invoke_fn(PM_FPGA_LOAD, lower_32_bits(address),
+ upper_32_bits(address), size, flags, NULL);
+}
+
+/**
+ * zynqmp_pm_fpga_get_status - Read value from PCAP status register
+ * @value: Value to read
+ *
+ * This function provides access to the xilfpga library to get
+ * the PCAP status
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_fpga_get_status(u32 *value)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!value)
+ return -EINVAL;
+
+ ret = zynqmp_pm_invoke_fn(PM_FPGA_GET_STATUS, 0, 0, 0, 0, ret_payload);
+ *value = ret_payload[1];
+
+ return ret;
+}
+
static const struct zynqmp_eemi_ops eemi_ops = {
.get_api_version = zynqmp_pm_get_api_version,
.query_data = zynqmp_pm_query_data,
@@ -482,6 +526,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
.clock_setparent = zynqmp_pm_clock_setparent,
.clock_getparent = zynqmp_pm_clock_getparent,
.ioctl = zynqmp_pm_ioctl,
+ .fpga_load = zynqmp_pm_fpga_load,
+ .fpga_get_status = zynqmp_pm_fpga_get_status,
};
/**
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 3c3c28e..16d4042 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -32,8 +32,18 @@
/* Number of 32bits values in payload */
#define PAYLOAD_ARG_CNT 4U
+/*
+ * Firmware FPGA Manager flags
+ * XILINX_ZYNQMP_PM_FPGA_PARTIAL: FPGA partial reconfiguration
+ */
+#define XILINX_ZYNQMP_PM_FPGA_PARTIAL BIT(0)
+
+
+
enum pm_api_id {
PM_GET_API_VERSION = 1,
+ PM_FPGA_LOAD = 22,
+ PM_FPGA_GET_STATUS,
PM_IOCTL = 34,
PM_QUERY_DATA,
PM_CLOCK_ENABLE,
@@ -91,6 +101,8 @@ struct zynqmp_pm_query_data {
struct zynqmp_eemi_ops {
int (*get_api_version)(u32 *version);
+ int (*fpga_load)(const u64 address, const u32 size, const u32 flags);
+ int (*fpga_get_status)(u32 *value);
int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
int (*clock_enable)(u32 clock_id);
int (*clock_disable)(u32 clock_id);
--
2.7.4
Powered by blists - more mailing lists