linux-kernel - [PATCH 4.19 065/313] ACPI: SPCR: Consider baud rate 0 as preconfigured state

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190211141858.204121706@linuxfoundation.org>
Date:   Mon, 11 Feb 2019 15:15:45 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Prarit Bhargava <prarit@...hat.com>,
        "Rafael J. Wysocki" <rafael.j.wysocki@...el.com>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH 4.19 065/313] ACPI: SPCR: Consider baud rate 0 as preconfigured state

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit b413b1abeb21b4a152c0bf8d1379efa30759b6e3 ]

Since SPCR 1.04 [1] the baud rate of 0 means a preconfigured state of UART.
Assume firmware or bootloader configures console correctly.

[1]: https://docs.microsoft.com/en-us/windows-hardware/drivers/serports/serial-port-console-redirection-table

Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Reviewed-by: Prarit Bhargava <prarit@...hat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/acpi/spcr.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
index 9d52743080a4..c336784d0bcb 100644
--- a/drivers/acpi/spcr.c
+++ b/drivers/acpi/spcr.c
@@ -148,6 +148,13 @@ int __init acpi_parse_spcr(bool enable_earlycon, bool enable_console)
 	}
 
 	switch (table->baud_rate) {
+	case 0:
+		/*
+		 * SPCR 1.04 defines 0 as a preconfigured state of UART.
+		 * Assume firmware or bootloader configures console correctly.
+		 */
+		baud_rate = 0;
+		break;
 	case 3:
 		baud_rate = 9600;
 		break;
@@ -196,6 +203,10 @@ int __init acpi_parse_spcr(bool enable_earlycon, bool enable_console)
 		 * UART so don't attempt to change to the baud rate state
 		 * in the table because driver cannot calculate the dividers
 		 */
+		baud_rate = 0;
+	}
+
+	if (!baud_rate) {
 		snprintf(opts, sizeof(opts), "%s,%s,0x%llx", uart, iotype,
 			 table->serial_port.address);
 	} else {
-- 
2.19.1