linux-kernel - Re: [PATCH 6/7] ARM: dts: suniv: Add pinmux for SPI0 and SPI1 of F1C100s

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 11 Feb 2019 16:51:52 +0100
From:   Maxime Ripard <maxime.ripard@...tlin.com>
To:     Mesih Kilinc <mesihkilinc@...il.com>
Cc:     devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
        linux-sunxi@...glegroups.com, Chen-Yu Tsai <wens@...e.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Icenowy Zheng <icenowy@...c.io>,
        Rob Herring <robh+dt@...nel.org>
Subject: Re: [PATCH 6/7] ARM: dts: suniv: Add pinmux for SPI0 and SPI1 of
 F1C100s

On Mon, Feb 11, 2019 at 12:21:12PM +0300, Mesih Kilinc wrote:
> PC0~PC4 is pin group for SPI0. PA0~PA4 is pin group for SPI1.
> Add device tree nodes for this groups.
> 
> Signed-off-by: Mesih Kilinc <mesihkilinc@...il.com>
> ---
>  arch/arm/boot/dts/suniv-f1c100s.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
> index 1b332d9..a92a411 100644
> --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi
> +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
> @@ -96,6 +96,16 @@
>  				pins = "PE0", "PE1";
>  				function = "uart0";
>  			};
> +
> +			spi0_pc_pins: spi0-pc-pins {
> +				pins = "PC0", "PC1", "PC2", "PC3";
> +				function = "spi0";
> +			};
> +
> +			spi1_pa_pins: spi1-pa-pins {
> +				pins = "PA0", "PA1", "PA2", "PA3";
> +				function = "spi1";
> +			};

Are they the only options for the muxing of the SPI pins? if so, you'd
need to remove the pin bank, and to set the pinctrl-0 and
pinctrl-names in the DTSI.

We also move the CS pin out in a separate group to accomodate devices
that use a GPIO instead.

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)