| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190211164048.7841-1-j.neuschaefer@gmx.net>
Date: Mon, 11 Feb 2019 17:40:48 +0100
From: Jonathan Neuschäfer <j.neuschaefer@....net>
To: linux-clk@...r.kernel.org
Cc: Jonathan Neuschäfer <j.neuschaefer@....net>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <fabio.estevam@....com>,
NXP Linux Team <linux-imx@....com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH] clk: imx5: Fix i.MX50 clock registers
There are a few differences between the i.MX50 clock tree and those of
i.MX51 and i.MX53 that are not yet handled in clk-imx51-imx53.c.
This patch handles the following differences:
- i.MX50 does not have a periph_apm clock. Instead, the main bus clock
(a.k.a. periph_clk) comes directly from a MUX between pll1_sw,
pll2_sw, pll3_sw, and lp_apm.
- The MUX bits for esdhc_{a,c,d}_sel are shifted by one bit within
CSCMR1.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@....net>
---
Because I'm touching a critical driver that's shared between all i.MX5
SoC's, I'd prefer to get a confirmation from someone with i.MX51 or
i.MX53 hardware, that the driver still works on that hardware.
---
drivers/clk/imx/clk-imx51-imx53.c | 59 +++++++++++++++++++++++--------
1 file changed, 45 insertions(+), 14 deletions(-)
diff --git a/drivers/clk/imx/clk-imx51-imx53.c b/drivers/clk/imx/clk-imx51-imx53.c
index fc8e782d817b..6fca0bb97858 100644
--- a/drivers/clk/imx/clk-imx51-imx53.c
+++ b/drivers/clk/imx/clk-imx51-imx53.c
@@ -164,10 +164,6 @@ static void __init mx5_clocks_common_init(void __iomem *ccm_base)
clk[IMX5_CLK_CKIH1] = imx_obtain_fixed_clock("ckih1", 0);
clk[IMX5_CLK_CKIH2] = imx_obtain_fixed_clock("ckih2", 0);
- clk[IMX5_CLK_PERIPH_APM] = imx_clk_mux("periph_apm", MXC_CCM_CBCMR, 12, 2,
- periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
- clk[IMX5_CLK_MAIN_BUS] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
- main_bus_sel, ARRAY_SIZE(main_bus_sel));
clk[IMX5_CLK_PER_LP_APM] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1,
per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel));
clk[IMX5_CLK_PER_PRED1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2);
@@ -191,16 +187,10 @@ static void __init mx5_clocks_common_init(void __iomem *ccm_base)
clk[IMX5_CLK_UART_PRED] = imx_clk_divider("uart_pred", "uart_sel", MXC_CCM_CSCDR1, 3, 3);
clk[IMX5_CLK_UART_ROOT] = imx_clk_divider("uart_root", "uart_pred", MXC_CCM_CSCDR1, 0, 3);
- clk[IMX5_CLK_ESDHC_A_SEL] = imx_clk_mux("esdhc_a_sel", MXC_CCM_CSCMR1, 20, 2,
- standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
- clk[IMX5_CLK_ESDHC_B_SEL] = imx_clk_mux("esdhc_b_sel", MXC_CCM_CSCMR1, 16, 2,
- standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
clk[IMX5_CLK_ESDHC_A_PRED] = imx_clk_divider("esdhc_a_pred", "esdhc_a_sel", MXC_CCM_CSCDR1, 16, 3);
clk[IMX5_CLK_ESDHC_A_PODF] = imx_clk_divider("esdhc_a_podf", "esdhc_a_pred", MXC_CCM_CSCDR1, 11, 3);
clk[IMX5_CLK_ESDHC_B_PRED] = imx_clk_divider("esdhc_b_pred", "esdhc_b_sel", MXC_CCM_CSCDR1, 22, 3);
clk[IMX5_CLK_ESDHC_B_PODF] = imx_clk_divider("esdhc_b_podf", "esdhc_b_pred", MXC_CCM_CSCDR1, 19, 3);
- clk[IMX5_CLK_ESDHC_C_SEL] = imx_clk_mux("esdhc_c_sel", MXC_CCM_CSCMR1, 19, 1, esdhc_c_sel, ARRAY_SIZE(esdhc_c_sel));
- clk[IMX5_CLK_ESDHC_D_SEL] = imx_clk_mux("esdhc_d_sel", MXC_CCM_CSCMR1, 18, 1, esdhc_d_sel, ARRAY_SIZE(esdhc_d_sel));
clk[IMX5_CLK_EMI_SEL] = imx_clk_mux("emi_sel", MXC_CCM_CBCDR, 26, 1,
emi_slow_sel, ARRAY_SIZE(emi_slow_sel));
@@ -311,10 +301,6 @@ static void __init mx5_clocks_common_init(void __iomem *ccm_base)
clk_register_clkdev(clk[IMX5_CLK_CPU_PODF], NULL, "cpu0");
clk_register_clkdev(clk[IMX5_CLK_GPC_DVFS], "gpc_dvfs", NULL);
- /* Set SDHC parents to be PLL2 */
- clk_set_parent(clk[IMX5_CLK_ESDHC_A_SEL], clk[IMX5_CLK_PLL2_SW]);
- clk_set_parent(clk[IMX5_CLK_ESDHC_B_SEL], clk[IMX5_CLK_PLL2_SW]);
-
/* move usb phy clk to 24MHz */
clk_set_parent(clk[IMX5_CLK_USB_PHY_SEL], clk[IMX5_CLK_OSC]);
}
@@ -342,8 +328,21 @@ static void __init mx50_clocks_init(struct device_node *np)
mx5_clocks_common_init(ccm_base);
+ /*
+ * This clock is called periph_clk in the i.MX50 Reference Manual, but
+ * it comes closest in scope to the main_bus_clk of i.MX51 and i.MX53
+ */
+ clk[IMX5_CLK_MAIN_BUS] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+
clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 10, 1,
lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
+ clk[IMX5_CLK_ESDHC_A_SEL] = imx_clk_mux("esdhc_a_sel", MXC_CCM_CSCMR1, 21, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[IMX5_CLK_ESDHC_B_SEL] = imx_clk_mux("esdhc_b_sel", MXC_CCM_CSCMR1, 16, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[IMX5_CLK_ESDHC_C_SEL] = imx_clk_mux("esdhc_c_sel", MXC_CCM_CSCMR1, 20, 1, esdhc_c_sel, ARRAY_SIZE(esdhc_c_sel));
+ clk[IMX5_CLK_ESDHC_D_SEL] = imx_clk_mux("esdhc_d_sel", MXC_CCM_CSCMR1, 19, 1, esdhc_d_sel, ARRAY_SIZE(esdhc_d_sel));
clk[IMX5_CLK_ESDHC1_PER_GATE] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
clk[IMX5_CLK_ESDHC2_PER_GATE] = imx_clk_gate2("esdhc2_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 6);
clk[IMX5_CLK_ESDHC3_PER_GATE] = imx_clk_gate2("esdhc3_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 10);
@@ -372,6 +371,10 @@ static void __init mx50_clocks_init(struct device_node *np)
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+ /* Set SDHC parents to be PLL2 */
+ clk_set_parent(clk[IMX5_CLK_ESDHC_A_SEL], clk[IMX5_CLK_PLL2_SW]);
+ clk_set_parent(clk[IMX5_CLK_ESDHC_B_SEL], clk[IMX5_CLK_PLL2_SW]);
+
/* set SDHC root clock to 200MHZ*/
clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 200000000);
clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 200000000);
@@ -410,6 +413,10 @@ static void __init mx51_clocks_init(struct device_node *np)
mx5_clocks_common_init(ccm_base);
+ clk[IMX5_CLK_PERIPH_APM] = imx_clk_mux("periph_apm", MXC_CCM_CBCMR, 12, 2,
+ periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
+ clk[IMX5_CLK_MAIN_BUS] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
+ main_bus_sel, ARRAY_SIZE(main_bus_sel));
clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 9, 1,
lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
clk[IMX5_CLK_IPU_DI0_SEL] = imx_clk_mux_flags("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
@@ -422,6 +429,12 @@ static void __init mx51_clocks_init(struct device_node *np)
mx51_tve_sel, ARRAY_SIZE(mx51_tve_sel));
clk[IMX5_CLK_TVE_GATE] = imx_clk_gate2("tve_gate", "tve_sel", MXC_CCM_CCGR2, 30);
clk[IMX5_CLK_TVE_PRED] = imx_clk_divider("tve_pred", "pll3_sw", MXC_CCM_CDCDR, 28, 3);
+ clk[IMX5_CLK_ESDHC_A_SEL] = imx_clk_mux("esdhc_a_sel", MXC_CCM_CSCMR1, 20, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[IMX5_CLK_ESDHC_B_SEL] = imx_clk_mux("esdhc_b_sel", MXC_CCM_CSCMR1, 16, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[IMX5_CLK_ESDHC_C_SEL] = imx_clk_mux("esdhc_c_sel", MXC_CCM_CSCMR1, 19, 1, esdhc_c_sel, ARRAY_SIZE(esdhc_c_sel));
+ clk[IMX5_CLK_ESDHC_D_SEL] = imx_clk_mux("esdhc_d_sel", MXC_CCM_CSCMR1, 18, 1, esdhc_d_sel, ARRAY_SIZE(esdhc_d_sel));
clk[IMX5_CLK_ESDHC1_PER_GATE] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
clk[IMX5_CLK_ESDHC2_PER_GATE] = imx_clk_gate2("esdhc2_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 6);
clk[IMX5_CLK_ESDHC3_PER_GATE] = imx_clk_gate2("esdhc3_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 10);
@@ -451,6 +464,10 @@ static void __init mx51_clocks_init(struct device_node *np)
/* set the usboh3 parent to pll2_sw */
clk_set_parent(clk[IMX5_CLK_USBOH3_SEL], clk[IMX5_CLK_PLL2_SW]);
+ /* Set SDHC parents to be PLL2 */
+ clk_set_parent(clk[IMX5_CLK_ESDHC_A_SEL], clk[IMX5_CLK_PLL2_SW]);
+ clk_set_parent(clk[IMX5_CLK_ESDHC_B_SEL], clk[IMX5_CLK_PLL2_SW]);
+
/* set SDHC root clock to 166.25MHZ*/
clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 166250000);
clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 166250000);
@@ -505,6 +522,10 @@ static void __init mx53_clocks_init(struct device_node *np)
mx5_clocks_common_init(ccm_base);
+ clk[IMX5_CLK_PERIPH_APM] = imx_clk_mux("periph_apm", MXC_CCM_CBCMR, 12, 2,
+ periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
+ clk[IMX5_CLK_MAIN_BUS] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
+ main_bus_sel, ARRAY_SIZE(main_bus_sel));
clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 10, 1,
lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
clk[IMX5_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
@@ -526,6 +547,12 @@ static void __init mx53_clocks_init(struct device_node *np)
mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel), CLK_SET_RATE_PARENT);
clk[IMX5_CLK_TVE_GATE] = imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30);
clk[IMX5_CLK_TVE_PRED] = imx_clk_divider("tve_pred", "tve_ext_sel", MXC_CCM_CDCDR, 28, 3);
+ clk[IMX5_CLK_ESDHC_A_SEL] = imx_clk_mux("esdhc_a_sel", MXC_CCM_CSCMR1, 20, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[IMX5_CLK_ESDHC_B_SEL] = imx_clk_mux("esdhc_b_sel", MXC_CCM_CSCMR1, 16, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[IMX5_CLK_ESDHC_C_SEL] = imx_clk_mux("esdhc_c_sel", MXC_CCM_CSCMR1, 19, 1, esdhc_c_sel, ARRAY_SIZE(esdhc_c_sel));
+ clk[IMX5_CLK_ESDHC_D_SEL] = imx_clk_mux("esdhc_d_sel", MXC_CCM_CSCMR1, 18, 1, esdhc_d_sel, ARRAY_SIZE(esdhc_d_sel));
clk[IMX5_CLK_ESDHC1_PER_GATE] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
clk[IMX5_CLK_ESDHC2_PER_GATE] = imx_clk_gate2("esdhc2_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 6);
clk[IMX5_CLK_ESDHC3_PER_GATE] = imx_clk_gate2("esdhc3_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 10);
@@ -588,6 +615,10 @@ static void __init mx53_clocks_init(struct device_node *np)
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+ /* Set SDHC parents to be PLL2 */
+ clk_set_parent(clk[IMX5_CLK_ESDHC_A_SEL], clk[IMX5_CLK_PLL2_SW]);
+ clk_set_parent(clk[IMX5_CLK_ESDHC_B_SEL], clk[IMX5_CLK_PLL2_SW]);
+
/* set SDHC root clock to 200MHZ*/
clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 200000000);
clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 200000000);
--
2.20.1
Powered by blists - more mailing lists