| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190211113128.GA22843@mani>
Date: Mon, 11 Feb 2019 17:01:28 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: Peter Robinson <pbrobinson@...il.com>
Cc: heiko@...ech.de, linux-rockchip@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, ezequiel@...labora.com,
tom@...rs.com, dev@...rs.com, linux-kernel@...r.kernel.org,
mani@...nel.org
Subject: Re: [PATCH] arm64: dts: rockchip: Add on-board WiFi/BT support for
Rock960 boards
Hi Peter,
On Fri, Feb 08, 2019 at 04:45:01PM +0000, Peter Robinson wrote:
> Hi Mani,
>
> On Thu, Feb 7, 2019 at 5:54 AM Manivannan Sadhasivam
> <manivannan.sadhasivam@...aro.org> wrote:
> >
> > Add on-board WiFi/BT support for Rock960 boards such as Rock960 based
> > on AP6356S and Ficus based on AP6354 wireless modules.
> >
> > Firmwares for the respective boards are available here:
> >
> > http://people.linaro.org/~manivannan.sadhasivam/rock960_wifi/
> > http://people.linaro.org/~manivannan.sadhasivam/ficus_wifi/
> >
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
>
> There's some warnings on building these I noticed in testing this on Fedora:
>
> DTC arch/arm64/boot/dts/rockchip/rk3399-ficus.dtb
> arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi:490.3-13: Warning
> (reg_format): /dwmmc@...10000/wifi@1:reg: property has invalid length
> (4 bytes) (#address-cells == 2, #size-cells == 1)
> arch/arm64/boot/dts/rockchip/rk3399-ficus.dtb: Warning
> (pci_device_bus_num): Failed prerequisite 'reg_format'
> arch/arm64/boot/dts/rockchip/rk3399-ficus.dtb: Warning (i2c_bus_reg):
> Failed prerequisite 'reg_format'
> arch/arm64/boot/dts/rockchip/rk3399-ficus.dtb: Warning (spi_bus_reg):
> Failed prerequisite 'reg_format'
> arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi:488.16-496.4: Warning
> (avoid_default_addr_size): /dwmmc@...10000/wifi@1: Relying on default
> #address-cells value
> arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi:488.16-496.4: Warning
> (avoid_default_addr_size): /dwmmc@...10000/wifi@1: Relying on default
> #size-cells value
>
> DTC arch/arm64/boot/dts/rockchip/rk3399-rock960.dtb
> arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi:490.3-13: Warning
> (reg_format): /dwmmc@...10000/wifi@1:reg: property has invalid length
> (4 bytes) (#address-cells == 2, #size-cells == 1)
> arch/arm64/boot/dts/rockchip/rk3399-rock960.dtb: Warning
> (pci_device_bus_num): Failed prerequisite 'reg_format'
> arch/arm64/boot/dts/rockchip/rk3399-rock960.dtb: Warning
> (i2c_bus_reg): Failed prerequisite 'reg_format'
> arch/arm64/boot/dts/rockchip/rk3399-rock960.dtb: Warning
> (spi_bus_reg): Failed prerequisite 'reg_format'
> arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi:488.16-496.4: Warning
> (avoid_default_addr_size): /dwmmc@...10000/wifi@1: Relying on default
> #address-cells value
> arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi:488.16-496.4: Warning
> (avoid_default_addr_size): /dwmmc@...10000/wifi@1: Relying on default
> #size-cells value
>
Hmm. Since the parent node "sdio0" is missing the address/size cells
property, the default value has been used by the DTC. I think it would
make sense to just drop the reg property from "wifi" node instead of
modifying the parent "sdio0" node.
If no one has any issue over this, I'll send out another revision with the
reg property removed.
Thanks,
Mani
> > ---
> > .../boot/dts/rockchip/rk3399-rock960.dtsi | 96 ++++++++++++++++++-
> > 1 file changed, 95 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
> > index 56abbb08c133..1b2f7cd82244 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
> > @@ -9,6 +9,15 @@
> > #include "rk3399-opp.dtsi"
> >
> > / {
> > + sdio_pwrseq: sdio-pwrseq {
> > + compatible = "mmc-pwrseq-simple";
> > + clocks = <&rk808 1>;
> > + clock-names = "ext_clock";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&wifi_enable_h>;
> > + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
> > + };
> > +
> > vcc1v8_s0: vcc1v8-s0 {
> > compatible = "regulator-fixed";
> > regulator-name = "vcc1v8_s0";
> > @@ -362,6 +371,20 @@
> > };
> >
> > &pinctrl {
> > + bt {
> > + bt_enable_h: bt-enable-h {
> > + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > +
> > + bt_host_wake_l: bt-host-wake-l {
> > + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > +
> > + bt_wake_l: bt-wake-l {
> > + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > + };
> > +
> > sdmmc {
> > sdmmc_bus1: sdmmc-bus1 {
> > rockchip,pins =
> > @@ -387,6 +410,26 @@
> > };
> > };
> >
> > + sdio0 {
> > + sdio0_bus4: sdio0-bus4 {
> > + rockchip,pins =
> > + <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>,
> > + <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>,
> > + <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>,
> > + <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>;
> > + };
> > +
> > + sdio0_cmd: sdio0-cmd {
> > + rockchip,pins =
> > + <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>;
> > + };
> > +
> > + sdio0_clk: sdio0-clk {
> > + rockchip,pins =
> > + <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>;
> > + };
> > + };
> > +
> > pmic {
> > pmic_int_l: pmic-int-l {
> > rockchip,pins =
> > @@ -403,6 +446,19 @@
> > <1 14 RK_FUNC_GPIO &pcfg_pull_down>;
> > };
> > };
> > +
> > + sdio-pwrseq {
> > + wifi_enable_h: wifi-enable-h {
> > + rockchip,pins =
> > + <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > + };
> > +
> > + wifi {
> > + wifi_host_wake_l: wifi-host-wake-l {
> > + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > + };
> > };
> >
> > &pwm2 {
> > @@ -413,6 +469,33 @@
> > status = "okay";
> > };
> >
> > +&sdio0 {
> > + clock-frequency = <50000000>;
> > + bus-width = <4>;
> > + cap-sdio-irq;
> > + cap-sd-highspeed;
> > + no-emmc;
> > + keep-power-in-suspend;
> > + mmc-pwrseq = <&sdio_pwrseq>;
> > + non-removable;
> > + num-slots = <1>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
> > + sd-uhs-sdr104;
> > +
> > + status = "okay";
> > +
> > + brcmf: wifi@1 {
> > + compatible = "brcm,bcm4329-fmac";
> > + reg = <1>;
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
> > + interrupt-names = "host-wake";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&wifi_host_wake_l>;
> > + };
> > +};
> > +
> > &sdhci {
> > bus-width = <8>;
> > mmc-hs400-1_8v;
> > @@ -439,8 +522,19 @@
> >
> > &uart0 {
> > pinctrl-names = "default";
> > - pinctrl-0 = <&uart0_xfer &uart0_cts>;
> > + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
> > status = "okay";
> > +
> > + bluetooth {
> > + compatible = "brcm,bcm43438-bt";
> > + clocks = <&rk808 1>;
> > + clock-names = "ext_clock";
> > + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
> > + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
> > + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
> > + };
> > };
> >
> > &uart2 {
> > --
> > 2.17.1
> >
Powered by blists - more mailing lists