| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190212142218.4D85A1128113@debutante.sirena.org.uk>
Date: Tue, 12 Feb 2019 14:22:18 +0000 (GMT)
From: Mark Brown <broonie@...nel.org>
To: Axel Lin <axel.lin@...ics.com>
Cc: Mark Brown <broonie@...nel.org>, linux-kernel@...r.kernel.org
Subject: Applied "regulator: lp8788-buck: Convert to linear range" to the regulator tree
The patch
regulator: lp8788-buck: Convert to linear range
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 7932a88052e1fa0acc082389d6505d524ee6c051 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@...ics.com>
Date: Sun, 10 Feb 2019 10:48:45 +0800
Subject: [PATCH] regulator: lp8788-buck: Convert to linear range
linear range is suitable for this driver, let's convert it to linear range.
Signed-off-by: Axel Lin <axel.lin@...ics.com>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
drivers/regulator/lp8788-buck.c | 38 +++++++++++++++++----------------
1 file changed, 20 insertions(+), 18 deletions(-)
diff --git a/drivers/regulator/lp8788-buck.c b/drivers/regulator/lp8788-buck.c
index 30de784d8e30..a7d30550bb5f 100644
--- a/drivers/regulator/lp8788-buck.c
+++ b/drivers/regulator/lp8788-buck.c
@@ -95,12 +95,10 @@ struct lp8788_buck {
void *dvs;
};
-/* BUCK 1 ~ 4 voltage table */
-static const int lp8788_buck_vtbl[] = {
- 500000, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000,
- 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000,
- 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, 1900000,
- 1950000, 2000000,
+/* BUCK 1 ~ 4 voltage ranges */
+static const struct regulator_linear_range buck_volt_ranges[] = {
+ REGULATOR_LINEAR_RANGE(500000, 0, 0, 0),
+ REGULATOR_LINEAR_RANGE(800000, 1, 25, 50000),
};
static void lp8788_buck1_set_dvs(struct lp8788_buck *buck)
@@ -345,8 +343,8 @@ static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev)
}
static const struct regulator_ops lp8788_buck12_ops = {
- .list_voltage = regulator_list_voltage_table,
- .map_voltage = regulator_map_voltage_ascend,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
.set_voltage_sel = lp8788_buck12_set_voltage_sel,
.get_voltage_sel = lp8788_buck12_get_voltage_sel,
.enable = regulator_enable_regmap,
@@ -358,8 +356,8 @@ static const struct regulator_ops lp8788_buck12_ops = {
};
static const struct regulator_ops lp8788_buck34_ops = {
- .list_voltage = regulator_list_voltage_table,
- .map_voltage = regulator_map_voltage_ascend,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.enable = regulator_enable_regmap,
@@ -375,8 +373,9 @@ static const struct regulator_desc lp8788_buck_desc[] = {
.name = "buck1",
.id = BUCK1,
.ops = &lp8788_buck12_ops,
- .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl),
- .volt_table = lp8788_buck_vtbl,
+ .n_voltages = 26,
+ .linear_ranges = buck_volt_ranges,
+ .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = LP8788_EN_BUCK,
@@ -386,8 +385,9 @@ static const struct regulator_desc lp8788_buck_desc[] = {
.name = "buck2",
.id = BUCK2,
.ops = &lp8788_buck12_ops,
- .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl),
- .volt_table = lp8788_buck_vtbl,
+ .n_voltages = 26,
+ .linear_ranges = buck_volt_ranges,
+ .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = LP8788_EN_BUCK,
@@ -397,8 +397,9 @@ static const struct regulator_desc lp8788_buck_desc[] = {
.name = "buck3",
.id = BUCK3,
.ops = &lp8788_buck34_ops,
- .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl),
- .volt_table = lp8788_buck_vtbl,
+ .n_voltages = 26,
+ .linear_ranges = buck_volt_ranges,
+ .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_BUCK3_VOUT,
@@ -410,8 +411,9 @@ static const struct regulator_desc lp8788_buck_desc[] = {
.name = "buck4",
.id = BUCK4,
.ops = &lp8788_buck34_ops,
- .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl),
- .volt_table = lp8788_buck_vtbl,
+ .n_voltages = 26,
+ .linear_ranges = buck_volt_ranges,
+ .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_BUCK4_VOUT,
--
2.20.1
Powered by blists - more mailing lists