| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1549937905.11898.5.camel@mtksdaap41>
Date: Tue, 12 Feb 2019 10:18:25 +0800
From: Dennis-YC Hsieh <dennis-yc.hsieh@...iatek.com>
To: Jassi Brar <jassisinghbrar@...il.com>,
Matthias Brugger <matthias.bgg@...il.com>,
CK Hu (胡俊光)
<ck.hu@...iatek.com>
CC: <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
srv_heupstream <srv_heupstream@...iatek.com>,
Houlong Wei (魏厚龙)
<houlong.wei@...iatek.com>, Bibby Hsieh <bibby.hsieh@...iatek.com>
Subject: Re: [PATCH 3/3] mailbox: mediatek: Remove busylist
Hi CK,
On Tue, 2019-01-29 at 17:20 +0800, Houlong Wei (魏厚龙) wrote:
> -----Original Message-----
> From: CK Hu [mailto:ck.hu@...iatek.com]
> Sent: Wednesday, January 16, 2019 1:05 PM
> To: Jassi Brar <jassisinghbrar@...il.com>; Matthias Brugger <matthias.bgg@...il.com>; Houlong Wei (魏厚龙) <houlong.wei@...iatek.com>
> Cc: linux-kernel@...r.kernel.org; linux-arm-kernel@...ts.infradead.org; linux-mediatek@...ts.infradead.org; srv_heupstream <srv_heupstream@...iatek.com>; CK Hu (胡俊光) <ck.hu@...iatek.com>
> Subject: [PATCH 3/3] mailbox: mediatek: Remove busylist
>
> After implement abort_data, controller need not to implement its own queue. Remove busylist because it's useless.
Remove busy list in controller makes client driver have no way to queue
pkt in gce hardware thread, which may hurt display and multimedia
performance since each pkt waits IRQ delay before previous pkt. Suggest
keep busy list design.
Regards,
Dennis
>
> Signed-off-by: CK Hu <ck.hu@...iatek.com>
> ---
> drivers/mailbox/mtk-cmdq-mailbox.c | 255 ++++-------------------------
> 1 file changed, 29 insertions(+), 226 deletions(-)
>
> diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
> index f2219f263ef6..45c59f677ecb 100644
> --- a/drivers/mailbox/mtk-cmdq-mailbox.c
> +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> @@ -16,9 +16,7 @@
> #include <linux/mailbox/mtk-cmdq-mailbox.h>
> #include <linux/of_device.h>
>
> -#define CMDQ_OP_CODE_MASK (0xff << CMDQ_OP_CODE_SHIFT)
> #define CMDQ_IRQ_MASK 0xffff
> -#define CMDQ_NUM_CMD(t) (t->cmd_buf_size / CMDQ_INST_SIZE)
>
> #define CMDQ_CURR_IRQ_STATUS 0x10
> #define CMDQ_THR_SLOT_CYCLES 0x30
> @@ -47,22 +45,10 @@
> #define CMDQ_THR_IRQ_EN (CMDQ_THR_IRQ_ERROR | CMDQ_THR_IRQ_DONE)
> #define CMDQ_THR_IS_WAITING BIT(31)
>
> -#define CMDQ_JUMP_BY_OFFSET 0x10000000
> -#define CMDQ_JUMP_BY_PA 0x10000001
> -
> struct cmdq_thread {
> struct mbox_chan *chan;
> void __iomem *base;
> - struct list_head task_busy_list;
> u32 priority;
> - bool atomic_exec;
> -};
> -
> -struct cmdq_task {
> - struct cmdq *cmdq;
> - struct list_head list_entry;
> - dma_addr_t pa_base;
> - struct cmdq_thread *thread;
> struct cmdq_pkt *pkt; /* the packet sent from mailbox client */
> };
>
> @@ -130,171 +116,47 @@ static void cmdq_thread_disable(struct cmdq *cmdq, struct cmdq_thread *thread)
> writel(CMDQ_THR_DISABLED, thread->base + CMDQ_THR_ENABLE_TASK); }
>
> -/* notify GCE to re-fetch commands by setting GCE thread PC */ -static void cmdq_thread_invalidate_fetched_data(struct cmdq_thread *thread) -{
> - writel(readl(thread->base + CMDQ_THR_CURR_ADDR),
> - thread->base + CMDQ_THR_CURR_ADDR);
> -}
> -
> -static void cmdq_task_insert_into_thread(struct cmdq_task *task) -{
> - struct device *dev = task->cmdq->mbox.dev;
> - struct cmdq_thread *thread = task->thread;
> - struct cmdq_task *prev_task = list_last_entry(
> - &thread->task_busy_list, typeof(*task), list_entry);
> - u64 *prev_task_base = prev_task->pkt->va_base;
> -
> - /* let previous task jump to this task */
> - dma_sync_single_for_cpu(dev, prev_task->pa_base,
> - prev_task->pkt->cmd_buf_size, DMA_TO_DEVICE);
> - prev_task_base[CMDQ_NUM_CMD(prev_task->pkt) - 1] =
> - (u64)CMDQ_JUMP_BY_PA << 32 | task->pa_base;
> - dma_sync_single_for_device(dev, prev_task->pa_base,
> - prev_task->pkt->cmd_buf_size, DMA_TO_DEVICE);
> -
> - cmdq_thread_invalidate_fetched_data(thread);
> -}
> -
> -static bool cmdq_command_is_wfe(u64 cmd) -{
> - u64 wfe_option = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
> - u64 wfe_op = (u64)(CMDQ_CODE_WFE << CMDQ_OP_CODE_SHIFT) << 32;
> - u64 wfe_mask = (u64)CMDQ_OP_CODE_MASK << 32 | 0xffffffff;
> -
> - return ((cmd & wfe_mask) == (wfe_op | wfe_option));
> -}
> -
> -/* we assume tasks in the same display GCE thread are waiting the same event. */ -static void cmdq_task_remove_wfe(struct cmdq_task *task) -{
> - struct device *dev = task->cmdq->mbox.dev;
> - u64 *base = task->pkt->va_base;
> - int i;
> -
> - dma_sync_single_for_cpu(dev, task->pa_base, task->pkt->cmd_buf_size,
> - DMA_TO_DEVICE);
> - for (i = 0; i < CMDQ_NUM_CMD(task->pkt); i++)
> - if (cmdq_command_is_wfe(base[i]))
> - base[i] = (u64)CMDQ_JUMP_BY_OFFSET << 32 |
> - CMDQ_JUMP_PASS;
> - dma_sync_single_for_device(dev, task->pa_base, task->pkt->cmd_buf_size,
> - DMA_TO_DEVICE);
> -}
> -
> static bool cmdq_thread_is_in_wfe(struct cmdq_thread *thread) {
> return readl(thread->base + CMDQ_THR_WAIT_TOKEN) & CMDQ_THR_IS_WAITING; }
>
> -static void cmdq_thread_wait_end(struct cmdq_thread *thread,
> - unsigned long end_pa)
> -{
> - struct device *dev = thread->chan->mbox->dev;
> - unsigned long curr_pa;
> -
> - if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_CURR_ADDR,
> - curr_pa, curr_pa == end_pa, 1, 20))
> - dev_err(dev, "GCE thread cannot run to end.\n");
> -}
> -
> -static void cmdq_task_exec_done(struct cmdq_task *task, enum cmdq_cb_status sta) -{
> - struct cmdq_task_cb *cb = &task->pkt->async_cb;
> - struct cmdq_cb_data data;
> -
> - WARN_ON(cb->cb == (cmdq_async_flush_cb)NULL);
> - data.sta = sta;
> - data.data = cb->data;
> - cb->cb(data);
> -
> - list_del(&task->list_entry);
> -}
> -
> -static void cmdq_task_handle_error(struct cmdq_task *task) -{
> - struct cmdq_thread *thread = task->thread;
> - struct cmdq_task *next_task;
> -
> - dev_err(task->cmdq->mbox.dev, "task 0x%p error\n", task);
> - WARN_ON(cmdq_thread_suspend(task->cmdq, thread) < 0);
> - next_task = list_first_entry_or_null(&thread->task_busy_list,
> - struct cmdq_task, list_entry);
> - if (next_task)
> - writel(next_task->pa_base, thread->base + CMDQ_THR_CURR_ADDR);
> - cmdq_thread_resume(thread);
> -}
> -
> static void cmdq_thread_irq_handler(struct cmdq *cmdq,
> struct cmdq_thread *thread)
> {
> - struct cmdq_task *task, *tmp, *curr_task = NULL;
> - u32 curr_pa, irq_flag, task_end_pa;
> - bool err;
> + unsigned long flags;
> + u32 curr_pa, irq_flag, end_pa;
> + int ret = 0;
>
> + spin_lock_irqsave(&thread->chan->lock, flags);
> irq_flag = readl(thread->base + CMDQ_THR_IRQ_STATUS);
> writel(~irq_flag, thread->base + CMDQ_THR_IRQ_STATUS);
>
> - /*
> - * When ISR call this function, another CPU core could run
> - * "release task" right before we acquire the spin lock, and thus
> - * reset / disable this GCE thread, so we need to check the enable
> - * bit of this GCE thread.
> - */
> - if (!(readl(thread->base + CMDQ_THR_ENABLE_TASK) & CMDQ_THR_ENABLED))
> - return;
> -
> - if (irq_flag & CMDQ_THR_IRQ_ERROR)
> - err = true;
> - else if (irq_flag & CMDQ_THR_IRQ_DONE)
> - err = false;
> - else
> - return;
> -
> curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR);
> + end_pa = readl(thread->base + CMDQ_THR_END_ADDR);
>
> - list_for_each_entry_safe(task, tmp, &thread->task_busy_list,
> - list_entry) {
> - task_end_pa = task->pa_base + task->pkt->cmd_buf_size;
> - if (curr_pa >= task->pa_base && curr_pa < task_end_pa)
> - curr_task = task;
> -
> - if (!curr_task || curr_pa == task_end_pa - CMDQ_INST_SIZE) {
> - cmdq_task_exec_done(task, CMDQ_CB_NORMAL);
> - kfree(task);
> - } else if (err) {
> - cmdq_task_exec_done(task, CMDQ_CB_ERROR);
> - cmdq_task_handle_error(curr_task);
> - kfree(task);
> - }
> -
> - if (curr_task)
> - break;
> - }
> + if (curr_pa != end_pa || irq_flag & CMDQ_THR_IRQ_ERROR)
> + ret = -EFAULT;
>
> - if (list_empty(&thread->task_busy_list)) {
> - cmdq_thread_disable(cmdq, thread);
> - clk_disable(cmdq->clock);
> - }
> + thread->pkt = NULL;
> + cmdq_thread_disable(cmdq, thread);
> + clk_disable(cmdq->clock);
> + spin_unlock_irqrestore(&thread->chan->lock, flags);
> + mbox_chan_txdone(thread->chan, ret);
> }
>
> static irqreturn_t cmdq_irq_handler(int irq, void *dev) {
> struct cmdq *cmdq = dev;
> - unsigned long irq_status, flags = 0L;
> + unsigned long irq_status;
> int bit;
>
> irq_status = readl(cmdq->base + CMDQ_CURR_IRQ_STATUS) & CMDQ_IRQ_MASK;
> if (!(irq_status ^ CMDQ_IRQ_MASK))
> return IRQ_NONE;
>
> - for_each_clear_bit(bit, &irq_status, fls(CMDQ_IRQ_MASK)) {
> - struct cmdq_thread *thread = &cmdq->thread[bit];
> -
> - spin_lock_irqsave(&thread->chan->lock, flags);
> - cmdq_thread_irq_handler(cmdq, thread);
> - spin_unlock_irqrestore(&thread->chan->lock, flags);
> - }
> + for_each_clear_bit(bit, &irq_status, fls(CMDQ_IRQ_MASK))
> + cmdq_thread_irq_handler(cmdq, &cmdq->thread[bit]);
>
> return IRQ_HANDLED;
> }
> @@ -310,7 +172,7 @@ static int cmdq_suspend(struct device *dev)
>
> for (i = 0; i < cmdq->thread_nr; i++) {
> thread = &cmdq->thread[i];
> - if (!list_empty(&thread->task_busy_list)) {
> + if (thread->pkt) {
> task_running = true;
> break;
> }
> @@ -347,72 +209,21 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
> struct cmdq_pkt *pkt = (struct cmdq_pkt *)data;
> struct cmdq_thread *thread = (struct cmdq_thread *)chan->con_priv;
> struct cmdq *cmdq = dev_get_drvdata(chan->mbox->dev);
> - struct cmdq_task *task;
> - unsigned long curr_pa, end_pa;
>
> /* Client should not flush new tasks if suspended. */
> WARN_ON(cmdq->suspended);
>
> - task = kzalloc(sizeof(*task), GFP_ATOMIC);
> - if (!task)
> - return -ENOMEM;
> + thread->pkt = pkt;
>
> - task->cmdq = cmdq;
> - INIT_LIST_HEAD(&task->list_entry);
> - task->pa_base = pkt->pa_base;
> - task->thread = thread;
> - task->pkt = pkt;
> -
> - if (list_empty(&thread->task_busy_list)) {
> - WARN_ON(clk_enable(cmdq->clock) < 0);
> - WARN_ON(cmdq_thread_reset(cmdq, thread) < 0);
> -
> - writel(task->pa_base, thread->base + CMDQ_THR_CURR_ADDR);
> - writel(task->pa_base + pkt->cmd_buf_size,
> - thread->base + CMDQ_THR_END_ADDR);
> - writel(thread->priority, thread->base + CMDQ_THR_PRIORITY);
> - writel(CMDQ_THR_IRQ_EN, thread->base + CMDQ_THR_IRQ_ENABLE);
> - writel(CMDQ_THR_ENABLED, thread->base + CMDQ_THR_ENABLE_TASK);
> - } else {
> - WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
> - curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR);
> - end_pa = readl(thread->base + CMDQ_THR_END_ADDR);
> -
> - /*
> - * Atomic execution should remove the following wfe, i.e. only
> - * wait event at first task, and prevent to pause when running.
> - */
> - if (thread->atomic_exec) {
> - /* GCE is executing if command is not WFE */
> - if (!cmdq_thread_is_in_wfe(thread)) {
> - cmdq_thread_resume(thread);
> - cmdq_thread_wait_end(thread, end_pa);
> - WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
> - /* set to this task directly */
> - writel(task->pa_base,
> - thread->base + CMDQ_THR_CURR_ADDR);
> - } else {
> - cmdq_task_insert_into_thread(task);
> - cmdq_task_remove_wfe(task);
> - smp_mb(); /* modify jump before enable thread */
> - }
> - } else {
> - /* check boundary */
> - if (curr_pa == end_pa - CMDQ_INST_SIZE ||
> - curr_pa == end_pa) {
> - /* set to this task directly */
> - writel(task->pa_base,
> - thread->base + CMDQ_THR_CURR_ADDR);
> - } else {
> - cmdq_task_insert_into_thread(task);
> - smp_mb(); /* modify jump before enable thread */
> - }
> - }
> - writel(task->pa_base + pkt->cmd_buf_size,
> - thread->base + CMDQ_THR_END_ADDR);
> - cmdq_thread_resume(thread);
> - }
> - list_move_tail(&task->list_entry, &thread->task_busy_list);
> + WARN_ON(clk_enable(cmdq->clock) < 0);
> + WARN_ON(cmdq_thread_reset(cmdq, thread) < 0);
> +
> + writel(thread->pkt->pa_base, thread->base + CMDQ_THR_CURR_ADDR);
> + writel(thread->pkt->pa_base + pkt->cmd_buf_size,
> + thread->base + CMDQ_THR_END_ADDR);
> + writel(thread->priority, thread->base + CMDQ_THR_PRIORITY);
> + writel(CMDQ_THR_IRQ_EN, thread->base + CMDQ_THR_IRQ_ENABLE);
> + writel(CMDQ_THR_ENABLED, thread->base + CMDQ_THR_ENABLE_TASK);
>
> return 0;
> }
> @@ -421,23 +232,18 @@ static void cmdq_mbox_abort_data(struct mbox_chan *chan) {
> struct cmdq_thread *thread = (struct cmdq_thread *)chan->con_priv;
> struct cmdq *cmdq = dev_get_drvdata(chan->mbox->dev);
> - struct cmdq_task *task, *tmp;
> unsigned long flags;
> u32 enable;
>
> spin_lock_irqsave(&thread->chan->lock, flags);
> - if (list_empty(&thread->task_busy_list))
> + if (!thread->pkt)
> goto out;
>
> WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
> if (!cmdq_thread_is_in_wfe(thread))
> goto wait;
>
> - list_for_each_entry_safe(task, tmp, &thread->task_busy_list,
> - list_entry) {
> - list_del(&task->list_entry);
> - kfree(task);
> - }
> + thread->pkt = NULL;
>
> cmdq_thread_resume(thread);
> cmdq_thread_disable(cmdq, thread);
> @@ -483,7 +289,6 @@ static struct mbox_chan *cmdq_xlate(struct mbox_controller *mbox,
>
> thread = (struct cmdq_thread *)mbox->chans[ind].con_priv;
> thread->priority = sp->args[1];
> - thread->atomic_exec = (sp->args[2] != 0);
> thread->chan = &mbox->chans[ind];
>
> return &mbox->chans[ind];
> @@ -539,8 +344,7 @@ static int cmdq_probe(struct platform_device *pdev)
> cmdq->mbox.ops = &cmdq_mbox_chan_ops;
> cmdq->mbox.of_xlate = cmdq_xlate;
>
> - /* make use of TXDONE_BY_ACK */
> - cmdq->mbox.txdone_irq = false;
> + cmdq->mbox.txdone_irq = true;
> cmdq->mbox.txdone_poll = false;
>
> cmdq->thread = devm_kcalloc(dev, cmdq->thread_nr, @@ -551,7 +355,6 @@ static int cmdq_probe(struct platform_device *pdev)
> for (i = 0; i < cmdq->thread_nr; i++) {
> cmdq->thread[i].base = cmdq->base + CMDQ_THR_BASE +
> CMDQ_THR_SIZE * i;
> - INIT_LIST_HEAD(&cmdq->thread[i].task_busy_list);
> cmdq->mbox.chans[i].con_priv = (void *)&cmdq->thread[i];
> }
>
> --
> 2.18.1
>
Powered by blists - more mailing lists