linux-kernel - Re: [PATCH v5 05/10] dt-bindings: irqchip: Introduce TISCI Interrupt router bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190212163018.GL5720@atomide.com>
Date:   Tue, 12 Feb 2019 08:30:18 -0800
From:   Tony Lindgren <tony@...mide.com>
To:     Lokesh Vutla <lokeshvutla@...com>
Cc:     marc.zyngier@....com, Nishanth Menon <nm@...com>,
        Santosh Shilimkar <ssantosh@...nel.org>,
        Rob Herring <robh+dt@...nel.org>, tglx@...utronix.de,
        jason@...edaemon.net,
        Linux ARM Mailing List <linux-arm-kernel@...ts.infradead.org>,
        linux-kernel@...r.kernel.org,
        Device Tree Mailing List <devicetree@...r.kernel.org>,
        Sekhar Nori <nsekhar@...com>, Tero Kristo <t-kristo@...com>,
        Peter Ujfalusi <peter.ujfalusi@...com>
Subject: Re: [PATCH v5 05/10] dt-bindings: irqchip: Introduce TISCI Interrupt
 router bindings

Hi,

* Lokesh Vutla <lokeshvutla@...com> [190212 07:43]:
> +The Interrupt Router (INTR) module provides a mechanism to route M
> +interrupt inputs to N interrupt outputs, where all M inputs are selectable
> +to be driven per N output. There is one register per output (MUXCNTL_N) that
> +controls the selection.
> +
> +
> +                                 Interrupt Router
> +                             +----------------------+
> +                             |  Inputs     Outputs  |
> +        +-------+            | +------+             |
> +        | GPIO  |----------->| | irq0 |             |       Host IRQ
> +        +-------+            | +------+             |      controller
> +                             |    .        +-----+  |      +-------+
> +        +-------+            |    .        |  0  |  |----->|  IRQ  |
> +        | INTA  |----------->|    .        +-----+  |      +-------+
> +        +-------+            |    .          .      |
> +                             | +------+      .      |
> +                             | | irqM |    +-----+  |
> +                             | +------+    |  N  |  |
> +                             |             +-----+  |
> +                             +----------------------+

Is this always one-to-one mapping or can the same interrupt be routed to
multiple targets like to the SoC and some coprocessor?

> +Configuration of these MUXCNTL_N registers is done by a system controller
> +(like the Device Memory and Security Controller on K3 AM654 SoC). System
> +controller will keep track of the used and unused registers within the Router.
> +Driver should request the system controller to get the range of GIC IRQs
> +assigned to the requesting hosts. It is the drivers responsibility to keep
> +track of Host IRQs.
> +
> +Communication between the host processor running an OS and the system
> +controller happens through a protocol called TI System Control Interface
> +(TISCI protocol). For more details refer:
> +Documentation/devicetree/bindings/arm/keystone/ti,sci.txt

Care to describe a bit why the interrupts need to be routed by a system
controller?

Regards,

Tony