lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Wed, 13 Feb 2019 15:51:16 -0600 From: Rob Herring <robh@...nel.org> To: Jagan Teki <jagan@...rulasolutions.com> Cc: devicetree <devicetree@...r.kernel.org>, Dmitry Torokhov <dmitry.torokhov@...il.com>, Chen-Yu Tsai <wens@...e.org>, linux-input@...r.kernel.org, "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>, Michael Trimarchi <michael@...rulasolutions.com>, linux-amarula@...rulasolutions.com Subject: Re: [PATCH v3 1/4] dt-bindings: input: touchscreen: goodix: Document AVDD28-supply property On Tue, Jan 22, 2019 at 7:39 AM Jagan Teki <jagan@...rulasolutions.com> wrote: > > On Mon, Jan 21, 2019 at 9:46 PM Rob Herring <robh@...nel.org> wrote: > > > > On Fri, Jan 18, 2019 at 10:01 AM Jagan Teki <jagan@...rulasolutions.com> wrote: > > > > > > On Wed, Jan 9, 2019 at 7:08 PM Rob Herring <robh@...nel.org> wrote: > > > > > > > > Please CC DT list if you want bindings reviewed. > > > > > > Sorry I forgot. > > > > > > > > > > > On Wed, Jan 9, 2019 at 1:40 AM Dmitry Torokhov > > > > <dmitry.torokhov@...il.com> wrote: > > > > > > > > > > On Sat, Dec 15, 2018 at 08:47:59PM +0530, Jagan Teki wrote: > > > > > > Most of the Goodix CTP controllers are supply with AVDD28 pin. > > > > > > which need to supply for controllers like GT5663 on some boards > > > > > > to trigger the power. > > > > > > > > > > > > So, document the supply property so-that the require boards > > > > > > that used on GT5663 can enable it via device tree. > > > > > > > > > > > > Signed-off-by: Jagan Teki <jagan@...rulasolutions.com> > > > > > > --- > > > > > > Documentation/devicetree/bindings/input/touchscreen/goodix.txt | 1 + > > > > > > 1 file changed, 1 insertion(+) > > > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt > > > > > > index f7e95c52f3c7..c4622c983e08 100644 > > > > > > --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt > > > > > > +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt > > > > > > @@ -23,6 +23,7 @@ Optional properties: > > > > > > - touchscreen-inverted-y : Y axis is inverted (boolean) > > > > > > - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) > > > > > > (swapping is done after inverting the axis) > > > > > > + - AVDD28-supply : Analog power supply regulator on AVDD28 pin > > > > > > > > > > I think we normally use lower case in DT bindings and rarely encode > > > > > voltage in the supply name unless we are dealing with several supplies > > > > > of the same kind, but I'll let Ron comment on this. > > > > > > > > Yes on lowercase though there are some exceptions. > > > > > > > > There's also a AVDD22 supply as well as DVDD12 and VDDIO. So we > > > > probably need to keep the voltage, but the binding is incomplete. > > > > > > What is incomplete here? can you please elaborate. > > > > You are missing the 3 other supplies the chip has: AVDD22, DVDD12 and VDDIO. > > Though it has other supplies, only AVDD28 is connected in the Host > interface design similar like 9. Reference Schematic on Page, 23 in > attached manual. That is for a particular board design. It still has other supplies. Just make the binding complete please. You can make them optional. I don't care if the driver supports controlling all the supplies or not (though Dmitry might).
Powered by blists - more mailing lists