[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <767c3d5e-f521-4d59-3922-a322b4124126@redhat.com>
Date: Thu, 14 Feb 2019 00:15:00 +0100
From: Hans de Goede <hdegoede@...hat.com>
To: Yauhen Kharuzhy <jekhor@...il.com>, linux-kernel@...r.kernel.org
Cc: MyungJoo Ham <myungjoo.ham@...sung.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Subject: Re: [PATCH 1/2] extcon-intel-cht-wc: Make charger detection
co-existed with OTG host mode
Hi,
On 10-02-19 21:36, Yauhen Kharuzhy wrote:
> Whiskey Cove Cherry Trail PMIC requires disabling OTG host mode before
> of charger detection procedure. Do this by manipulationg of CHGRCTRL1
> register.
>
> Source: APCI DSDT code of Lenovo Yoga Book YB1-X91L and open-sourced
> Intel's drivers.
Hmm, of the ACPI code is updating the otg-mode, then there should be
no reason for us to do this, can you provide an acpidump of your
device please?
Regards,
Hans
>
> Signed-off-by: Yauhen Kharuzhy <jekhor@...il.com>
> ---
> drivers/extcon/extcon-intel-cht-wc.c | 38 +++++++++++++++++++++++++++-
> 1 file changed, 37 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c
> index 5ef215297101..4f6ba249bc30 100644
> --- a/drivers/extcon/extcon-intel-cht-wc.c
> +++ b/drivers/extcon/extcon-intel-cht-wc.c
> @@ -29,7 +29,16 @@
> #define CHT_WC_CHGRCTRL0_DBPOFF BIT(6)
> #define CHT_WC_CHGRCTRL0_CHR_WDT_NOKICK BIT(7)
>
> -#define CHT_WC_CHGRCTRL1 0x5e17
> +#define CHT_WC_CHGRCTRL1 0x5e17
> +#define CHT_WC_CHGRCTRL1_DBPEN_MASK BIT(7)
> +#define CHT_WC_CHGRCTRL1_OTGMODE BIT(6)
> +#define CHT_WC_CHGRCTRL1_FTEMP_EVENT BIT(5)
> +#define CHT_WC_CHGRCTRL1_FUSB_INLMT_1500 BIT(4)
> +#define CHT_WC_CHGRCTRL1_FUSB_INLMT_900 BIT(3)
> +#define CHT_WC_CHGRCTRL1_FUSB_INLMT_500 BIT(2)
> +#define CHT_WC_CHGRCTRL1_FUSB_INLMT_150 BIT(1)
> +#define CHT_WC_CHGRCTRL1_FUSB_INLMT_100 BIT(0)
> +
>
> #define CHT_WC_USBSRC 0x5e29
> #define CHT_WC_USBSRC_STS_MASK GENMASK(1, 0)
> @@ -198,6 +207,29 @@ static void cht_wc_extcon_set_5v_boost(struct cht_wc_extcon_data *ext,
> dev_err(ext->dev, "Error writing Vbus GPIO CTLO: %d\n", ret);
> }
>
> +static void cht_wc_extcon_set_otgmode(struct cht_wc_extcon_data *ext,
> + bool enable)
> +{
> + unsigned int chgrctrl1;
> + int ret;
> +
> + ret = regmap_read(ext->regmap, CHT_WC_CHGRCTRL1, &chgrctrl1);
> + if (ret) {
> + dev_err(ext->dev, "Error reading CHGRCTRL1 reg: %d\n", ret);
> + return;
> + }
> +
> + if (enable)
> + chgrctrl1 |= CHT_WC_CHGRCTRL1_OTGMODE;
> + else
> + chgrctrl1 &= ~(CHT_WC_CHGRCTRL1_OTGMODE);
> +
> + ret = regmap_write(ext->regmap, CHT_WC_CHGRCTRL1, chgrctrl1);
> + if (ret)
> + dev_err(ext->dev,
> + "Error writing CHGRCTRL1 OTG mode bit: %d\n", ret);
> +}
> +
> /* Small helper to sync EXTCON_CHG_USB_SDP and EXTCON_USB state */
> static void cht_wc_extcon_set_state(struct cht_wc_extcon_data *ext,
> unsigned int cable, bool state)
> @@ -222,10 +254,14 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
>
> id = cht_wc_extcon_get_id(ext, pwrsrc_sts);
> if (id == USB_ID_GND) {
> + cht_wc_extcon_set_otgmode(ext, true);
> +
> /* The 5v boost causes a false VBUS / SDP detect, skip */
> goto charger_det_done;
> }
>
> + cht_wc_extcon_set_otgmode(ext, false);
> +
> /* Plugged into a host/charger or not connected? */
> if (!(pwrsrc_sts & CHT_WC_PWRSRC_VBUS)) {
> /* Route D+ and D- to PMIC for future charger detection */
>
Powered by blists - more mailing lists