linux-kernel - Re: [PATCH v2 11/15] dt-bindings: pinctrl: milbeaut: Add Milbeaut M10V pinctrl description

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Wed, 13 Feb 2019 14:10:51 +0900
From:   "Sugaya, Taichi" <sugaya.taichi@...ionext.com>
To:     Linus Walleij <linus.walleij@...aro.org>
Cc:     "open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Takao Orito <orito.takao@...ionext.com>,
        Kazuhiro Kasai <kasai.kazuhiro@...ionext.com>,
        Shinji Kanematsu <kanematsu.shinji@...ionext.com>,
        Jassi Brar <jaswinder.singh@...aro.org>,
        Masami Hiramatsu <masami.hiramatsu@...aro.org>,
        Marc Zyngier <marc.zyngier@....com>
Subject: Re: [PATCH v2 11/15] dt-bindings: pinctrl: milbeaut: Add Milbeaut
 M10V pinctrl description

Hi,

Thank you for your comments.

On 2019/02/08 22:32, Linus Walleij wrote:
> Hi Sugaya,
> 
> thanks for your patch!
> 
> On Fri, Feb 8, 2019 at 1:32 PM Sugaya Taichi
> <sugaya.taichi@...ionext.com> wrote:
> 
>> Add DT bindings document for Milbeaut M10V pinctrl.
>>
>> Signed-off-by: Sugaya Taichi <sugaya.taichi@...ionext.com>
> 
> (...)
>> +- interrupts: three interrupts specifer.
>> +- interrupt-names: corresponds "interrupts" factor.
> (...)
>> +               interrupts = <0 54 4>, <0 55 4>, <0 56 4>, <0 57 4>,
>> +                               <0 58 4>, <0 59 4>, <0 60 4>, <0 61 4>,
>> +                               <0 62 4>, <0 63 4>, <0 64 4>, <0 65 4>,
>> +                               <0 66 4>, <0 67 4>, <0 68 4>, <0 69 4>;
>> +               interrupt-names = "pin-48", "pin-49", "pin-50", "pin-51",
>> +                               "pin-52", "pin-53", "pin-54", "pin-55",
>> +                               "pin-56", "pin-57", "pin-58", "pin-59",
>> +                               "pin-60", "pin-61", "pin-62", "pin-63";
> 
> As mentioned in the review of the driver, don't do this.
> 
> This is a hierarchical interrupt controller, so these
> GIC-offset-to-GPIO-interrupt-offests should be hardcoded in
> the driver.
> 
> If these interrupt offsets differ between difference instances of
> this pin controller, they should have different compatible strings.
> 
> Yours,
> Linus Walleij
> 

I understand.
I am sure the content of bindings will change as a whole as driver changes.
Try it.

Thanks,
Sugaya Taichi