linux-kernel - [PATCH v2 2/3] dt-bindings: spi: Add the DMA properties for the SPI dma mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <2be9d6de92507e5886433fb2cd55117c63b63d72.1550043082.git.baolin.wang@linaro.org>
Date:   Wed, 13 Feb 2019 15:36:10 +0800
From:   Baolin Wang <baolin.wang@...aro.org>
To:     broonie@...nel.org, robh+dt@...nel.org, mark.rutland@....com
Cc:     orsonzhai@...il.com, zhang.lyra@...il.com, lanqing.liu@...soc.com,
        baolin.wang@...aro.org, linux-spi@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/3] dt-bindings: spi: Add the DMA properties for the SPI dma mode

From: Lanqing Liu <lanqing.liu@...soc.com>

Add the DMA properties for the SPI dma mode.

Signed-off-by: Lanqing Liu <lanqing.liu@...soc.com>
Signed-off-by: Baolin Wang <baolin.wang@...aro.org>
---
Changes from v1:
 - Remove sprd,dma-slave-ids property.
---
 Documentation/devicetree/bindings/spi/spi-sprd.txt |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/spi-sprd.txt b/Documentation/devicetree/bindings/spi/spi-sprd.txt
index bad211a..3c7eacc 100644
--- a/Documentation/devicetree/bindings/spi/spi-sprd.txt
+++ b/Documentation/devicetree/bindings/spi/spi-sprd.txt
@@ -14,6 +14,11 @@ Required properties:
 	address on the SPI bus. Should be set to 1.
 - #size-cells: Should be set to 0.
 
+Optional properties:
+dma-names: Should contain names of the SPI used DMA channel.
+dmas: Should contain DMA channels and DMA slave ids which the SPI used
+	sorted in the same order as the dma-names property.
+
 Example:
 spi0: spi@...00000{
 	compatible = "sprd,sc9860-spi";
@@ -21,6 +26,8 @@ spi0: spi@...00000{
 	interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	clock-names = "spi", "source","enable";
 	clocks = <&clk_spi0>, <&ext_26m>, <&clk_ap_apb_gates 5>;
+	dma-names = "rx_chn", "tx_chn";
+	dmas = <&apdma 11 11>, <&apdma 12 12>;
 	#address-cells = <1>;
 	#size-cells = <0>;
 };
-- 
1.7.9.5