| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190213085930.31578-3-tudor.ambarus@microchip.com>
Date: Wed, 13 Feb 2019 08:59:48 +0000
From: <Tudor.Ambarus@...rochip.com>
To: <robh+dt@...nel.org>, <mark.rutland@....com>,
<Nicolas.Ferre@...rochip.com>, <alexandre.belloni@...tlin.com>,
<Ludovic.Desroches@...rochip.com>, <dwmw2@...radead.org>,
<computersforpeace@...il.com>, <bbrezillon@...nel.org>,
<marek.vasut@...il.com>, <richard@....at>,
<miquel.raynal@...tlin.com>, <lee.jones@...aro.org>
CC: <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-mtd@...ts.infradead.org>,
<Tudor.Ambarus@...rochip.com>
Subject: [PATCH 02/11] memory: atmel-ebi: add generic name for ebi regmap
From: Tudor Ambarus <tudor.ambarus@...rochip.com>
The sam9x60 board defines the CCFG_EBICSA register under SFR,
and not as a MATRIX register, as previous boards do. Add a
more generic name for the EBI regmap as a prerequisite for
sam9x60 ebi support.
Signed-off-by: Tudor Ambarus <tudor.ambarus@...rochip.com>
---
drivers/memory/atmel-ebi.c | 23 ++++++++++++++++-------
1 file changed, 16 insertions(+), 7 deletions(-)
diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
index c3748b414c27..b45914cfa212 100644
--- a/drivers/memory/atmel-ebi.c
+++ b/drivers/memory/atmel-ebi.c
@@ -36,6 +36,7 @@ struct atmel_ebi_dev {
struct atmel_ebi_caps {
unsigned int available_cs;
unsigned int ebi_csa_offs;
+ const char *regmap_name;
void (*get_config)(struct atmel_ebi_dev *ebid,
struct atmel_ebi_dev_config *conf);
int (*xlate_config)(struct atmel_ebi_dev *ebid,
@@ -47,7 +48,7 @@ struct atmel_ebi_caps {
struct atmel_ebi {
struct clk *clk;
- struct regmap *matrix;
+ struct regmap *regmap;
struct {
struct regmap *regmap;
struct clk *clk;
@@ -357,7 +358,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
* one "atmel,smc-" property is present.
*/
if (ebi->caps->ebi_csa_offs && apply)
- regmap_update_bits(ebi->matrix,
+ regmap_update_bits(ebi->regmap,
ebi->caps->ebi_csa_offs,
BIT(cs), 0);
@@ -372,6 +373,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
static const struct atmel_ebi_caps at91sam9260_ebi_caps = {
.available_cs = 0xff,
.ebi_csa_offs = AT91SAM9260_MATRIX_EBICSA,
+ .regmap_name = "atmel,matrix",
.get_config = at91sam9_ebi_get_config,
.xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
@@ -380,6 +382,7 @@ static const struct atmel_ebi_caps at91sam9260_ebi_caps = {
static const struct atmel_ebi_caps at91sam9261_ebi_caps = {
.available_cs = 0xff,
.ebi_csa_offs = AT91SAM9261_MATRIX_EBICSA,
+ .regmap_name = "atmel,matrix",
.get_config = at91sam9_ebi_get_config,
.xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
@@ -388,6 +391,7 @@ static const struct atmel_ebi_caps at91sam9261_ebi_caps = {
static const struct atmel_ebi_caps at91sam9263_ebi0_caps = {
.available_cs = 0x3f,
.ebi_csa_offs = AT91SAM9263_MATRIX_EBI0CSA,
+ .regmap_name = "atmel,matrix",
.get_config = at91sam9_ebi_get_config,
.xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
@@ -396,6 +400,7 @@ static const struct atmel_ebi_caps at91sam9263_ebi0_caps = {
static const struct atmel_ebi_caps at91sam9263_ebi1_caps = {
.available_cs = 0x7,
.ebi_csa_offs = AT91SAM9263_MATRIX_EBI1CSA,
+ .regmap_name = "atmel,matrix",
.get_config = at91sam9_ebi_get_config,
.xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
@@ -404,6 +409,7 @@ static const struct atmel_ebi_caps at91sam9263_ebi1_caps = {
static const struct atmel_ebi_caps at91sam9rl_ebi_caps = {
.available_cs = 0x3f,
.ebi_csa_offs = AT91SAM9RL_MATRIX_EBICSA,
+ .regmap_name = "atmel,matrix",
.get_config = at91sam9_ebi_get_config,
.xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
@@ -412,6 +418,7 @@ static const struct atmel_ebi_caps at91sam9rl_ebi_caps = {
static const struct atmel_ebi_caps at91sam9g45_ebi_caps = {
.available_cs = 0x3f,
.ebi_csa_offs = AT91SAM9G45_MATRIX_EBICSA,
+ .regmap_name = "atmel,matrix",
.get_config = at91sam9_ebi_get_config,
.xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
@@ -420,6 +427,7 @@ static const struct atmel_ebi_caps at91sam9g45_ebi_caps = {
static const struct atmel_ebi_caps at91sam9x5_ebi_caps = {
.available_cs = 0x3f,
.ebi_csa_offs = AT91SAM9X5_MATRIX_EBICSA,
+ .regmap_name = "atmel,matrix",
.get_config = at91sam9_ebi_get_config,
.xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
@@ -543,13 +551,14 @@ static int atmel_ebi_probe(struct platform_device *pdev)
/*
* The sama5d3 does not provide an EBICSA register and thus does need
- * to access the matrix registers.
+ * to access it.
*/
if (ebi->caps->ebi_csa_offs) {
- ebi->matrix =
- syscon_regmap_lookup_by_phandle(np, "atmel,matrix");
- if (IS_ERR(ebi->matrix))
- return PTR_ERR(ebi->matrix);
+ ebi->regmap =
+ syscon_regmap_lookup_by_phandle(np,
+ ebi->caps->regmap_name);
+ if (IS_ERR(ebi->regmap))
+ return PTR_ERR(ebi->regmap);
}
ret = of_property_read_u32(np, "#address-cells", &val);
--
2.9.5
Powered by blists - more mailing lists