[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190213105308.GJ10129@piout.net>
Date: Wed, 13 Feb 2019 11:53:08 +0100
From: Alexandre Belloni <alexandre.belloni@...tlin.com>
To: Tudor.Ambarus@...rochip.com
Cc: robh+dt@...nel.org, mark.rutland@....com,
Nicolas.Ferre@...rochip.com, Ludovic.Desroches@...rochip.com,
dwmw2@...radead.org, computersforpeace@...il.com,
bbrezillon@...nel.org, marek.vasut@...il.com, richard@....at,
miquel.raynal@...tlin.com, lee.jones@...aro.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-mtd@...ts.infradead.org
Subject: Re: [PATCH 02/11] memory: atmel-ebi: add generic name for ebi regmap
On 13/02/2019 08:59:48+0000, Tudor.Ambarus@...rochip.com wrote:
> From: Tudor Ambarus <tudor.ambarus@...rochip.com>
>
> The sam9x60 board defines the CCFG_EBICSA register under SFR,
> and not as a MATRIX register, as previous boards do. Add a
> more generic name for the EBI regmap as a prerequisite for
> sam9x60 ebi support.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@...rochip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@...tlin.com>
> ---
> drivers/memory/atmel-ebi.c | 23 ++++++++++++++++-------
> 1 file changed, 16 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
> index c3748b414c27..b45914cfa212 100644
> --- a/drivers/memory/atmel-ebi.c
> +++ b/drivers/memory/atmel-ebi.c
> @@ -36,6 +36,7 @@ struct atmel_ebi_dev {
> struct atmel_ebi_caps {
> unsigned int available_cs;
> unsigned int ebi_csa_offs;
> + const char *regmap_name;
> void (*get_config)(struct atmel_ebi_dev *ebid,
> struct atmel_ebi_dev_config *conf);
> int (*xlate_config)(struct atmel_ebi_dev *ebid,
> @@ -47,7 +48,7 @@ struct atmel_ebi_caps {
>
> struct atmel_ebi {
> struct clk *clk;
> - struct regmap *matrix;
> + struct regmap *regmap;
> struct {
> struct regmap *regmap;
> struct clk *clk;
> @@ -357,7 +358,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
> * one "atmel,smc-" property is present.
> */
> if (ebi->caps->ebi_csa_offs && apply)
> - regmap_update_bits(ebi->matrix,
> + regmap_update_bits(ebi->regmap,
> ebi->caps->ebi_csa_offs,
> BIT(cs), 0);
>
> @@ -372,6 +373,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
> static const struct atmel_ebi_caps at91sam9260_ebi_caps = {
> .available_cs = 0xff,
> .ebi_csa_offs = AT91SAM9260_MATRIX_EBICSA,
> + .regmap_name = "atmel,matrix",
> .get_config = at91sam9_ebi_get_config,
> .xlate_config = atmel_ebi_xslate_smc_config,
> .apply_config = at91sam9_ebi_apply_config,
> @@ -380,6 +382,7 @@ static const struct atmel_ebi_caps at91sam9260_ebi_caps = {
> static const struct atmel_ebi_caps at91sam9261_ebi_caps = {
> .available_cs = 0xff,
> .ebi_csa_offs = AT91SAM9261_MATRIX_EBICSA,
> + .regmap_name = "atmel,matrix",
> .get_config = at91sam9_ebi_get_config,
> .xlate_config = atmel_ebi_xslate_smc_config,
> .apply_config = at91sam9_ebi_apply_config,
> @@ -388,6 +391,7 @@ static const struct atmel_ebi_caps at91sam9261_ebi_caps = {
> static const struct atmel_ebi_caps at91sam9263_ebi0_caps = {
> .available_cs = 0x3f,
> .ebi_csa_offs = AT91SAM9263_MATRIX_EBI0CSA,
> + .regmap_name = "atmel,matrix",
> .get_config = at91sam9_ebi_get_config,
> .xlate_config = atmel_ebi_xslate_smc_config,
> .apply_config = at91sam9_ebi_apply_config,
> @@ -396,6 +400,7 @@ static const struct atmel_ebi_caps at91sam9263_ebi0_caps = {
> static const struct atmel_ebi_caps at91sam9263_ebi1_caps = {
> .available_cs = 0x7,
> .ebi_csa_offs = AT91SAM9263_MATRIX_EBI1CSA,
> + .regmap_name = "atmel,matrix",
> .get_config = at91sam9_ebi_get_config,
> .xlate_config = atmel_ebi_xslate_smc_config,
> .apply_config = at91sam9_ebi_apply_config,
> @@ -404,6 +409,7 @@ static const struct atmel_ebi_caps at91sam9263_ebi1_caps = {
> static const struct atmel_ebi_caps at91sam9rl_ebi_caps = {
> .available_cs = 0x3f,
> .ebi_csa_offs = AT91SAM9RL_MATRIX_EBICSA,
> + .regmap_name = "atmel,matrix",
> .get_config = at91sam9_ebi_get_config,
> .xlate_config = atmel_ebi_xslate_smc_config,
> .apply_config = at91sam9_ebi_apply_config,
> @@ -412,6 +418,7 @@ static const struct atmel_ebi_caps at91sam9rl_ebi_caps = {
> static const struct atmel_ebi_caps at91sam9g45_ebi_caps = {
> .available_cs = 0x3f,
> .ebi_csa_offs = AT91SAM9G45_MATRIX_EBICSA,
> + .regmap_name = "atmel,matrix",
> .get_config = at91sam9_ebi_get_config,
> .xlate_config = atmel_ebi_xslate_smc_config,
> .apply_config = at91sam9_ebi_apply_config,
> @@ -420,6 +427,7 @@ static const struct atmel_ebi_caps at91sam9g45_ebi_caps = {
> static const struct atmel_ebi_caps at91sam9x5_ebi_caps = {
> .available_cs = 0x3f,
> .ebi_csa_offs = AT91SAM9X5_MATRIX_EBICSA,
> + .regmap_name = "atmel,matrix",
> .get_config = at91sam9_ebi_get_config,
> .xlate_config = atmel_ebi_xslate_smc_config,
> .apply_config = at91sam9_ebi_apply_config,
> @@ -543,13 +551,14 @@ static int atmel_ebi_probe(struct platform_device *pdev)
>
> /*
> * The sama5d3 does not provide an EBICSA register and thus does need
> - * to access the matrix registers.
> + * to access it.
> */
> if (ebi->caps->ebi_csa_offs) {
> - ebi->matrix =
> - syscon_regmap_lookup_by_phandle(np, "atmel,matrix");
> - if (IS_ERR(ebi->matrix))
> - return PTR_ERR(ebi->matrix);
> + ebi->regmap =
> + syscon_regmap_lookup_by_phandle(np,
> + ebi->caps->regmap_name);
> + if (IS_ERR(ebi->regmap))
> + return PTR_ERR(ebi->regmap);
> }
>
> ret = of_property_read_u32(np, "#address-cells", &val);
> --
> 2.9.5
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Powered by blists - more mailing lists