linux-kernel - [PATCH 3/6] nfit/ars: Allow root to busy-poll the ARS state machine

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <155017502147.944049.2893295352368862579.stgit@dwillia2-desk3.amr.corp.intel.com>
Date:   Thu, 14 Feb 2019 12:10:21 -0800
From:   Dan Williams <dan.j.williams@...el.com>
To:     linux-nvdimm@...ts.01.org
Cc:     Erwin Tsaur <erwin.tsaur@...cle.com>, vishal.l.verma@...el.com,
        linux-kernel@...r.kernel.org
Subject: [PATCH 3/6] nfit/ars: Allow root to busy-poll the ARS state machine

The ARS implementation implements exponential back-off on the poll
interval to prevent high-frequency access to the DIMM / platform
interface. Depending on when the ARS completes the poll interval may
exceed the completion event by minutes. Allow root to reset the timeout
each time it probes the status. A one-second timeout is still enforced,
but root can otherwise can control the poll interval.

Reported-by: Erwin Tsaur <erwin.tsaur@...cle.com>
Signed-off-by: Dan Williams <dan.j.williams@...el.com>
---
 drivers/acpi/nfit/core.c |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c
index 934be96dc149..5ec0e19760ea 100644
--- a/drivers/acpi/nfit/core.c
+++ b/drivers/acpi/nfit/core.c
@@ -1328,6 +1328,12 @@ static ssize_t scrub_show(struct device *dev,
 		rc = sprintf(buf, "%d%s", acpi_desc->scrub_count,
 				acpi_desc->scrub_busy
 				&& !acpi_desc->cancel ? "+\n" : "\n");
+		/* Allow an admin to poll the busy state at a higher rate */
+		if (acpi_desc->scrub_busy && !acpi_desc->cancel
+				&& capable(CAP_SYS_RAWIO)) {
+			acpi_desc->scrub_tmo = 1;
+			queue_delayed_work(nfit_wq, &acpi_desc->dwork, HZ);
+		}
 		mutex_unlock(&acpi_desc->init_mutex);
 	}
 	device_unlock(dev);