| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <9ea118140651636b3b868e28004d474ded4af5b6.1550184473.git.sean.wang@mediatek.com>
Date: Fri, 15 Feb 2019 07:19:37 +0800
From: <sean.wang@...iatek.com>
To: <robh+dt@...nel.org>, <mark.rutland@....com>,
<marcel@...tmann.org>, <johan.hedberg@...il.com>
CC: <devicetree@...r.kernel.org>, <linux-bluetooth@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, Sean Wang <sean.wang@...iatek.com>
Subject: [PATCH 5/6] Bluetooth: mediatek: update the common setup between MT7622 and other devices
From: Sean Wang <sean.wang@...iatek.com>
Update the setup sequence on MT7622 to apply the same flow with MT7663U
and MT7668U USB [1] as much as possible. These additional commands are
required to parse the corresponding event to determine what current state
the Bluetooth device is on and thus it's necessary to extend
mtk_hci_wmt_sync to support the reading status in the same patch.
[1] http://lists.infradead.org/pipermail/linux-mediatek/2019-January/017074.html
Signed-off-by: Sean Wang <sean.wang@...iatek.com>
---
drivers/bluetooth/btmtkuart.c | 204 +++++++++++++++++++++++++++++++---
1 file changed, 190 insertions(+), 14 deletions(-)
diff --git a/drivers/bluetooth/btmtkuart.c b/drivers/bluetooth/btmtkuart.c
index 4451b1db139a..e73b1013ba73 100644
--- a/drivers/bluetooth/btmtkuart.c
+++ b/drivers/bluetooth/btmtkuart.c
@@ -12,6 +12,7 @@
#include <linux/atomic.h>
#include <linux/clk.h>
#include <linux/firmware.h>
+#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -37,7 +38,17 @@
enum {
MTK_WMT_PATCH_DWNLD = 0x1,
MTK_WMT_FUNC_CTRL = 0x6,
- MTK_WMT_RST = 0x7
+ MTK_WMT_RST = 0x7,
+ MTK_WMT_SEMAPHORE = 0x17,
+};
+
+enum {
+ BTMTK_WMT_INVALID,
+ BTMTK_WMT_PATCH_UNDONE,
+ BTMTK_WMT_PATCH_DONE,
+ BTMTK_WMT_ON_UNDONE,
+ BTMTK_WMT_ON_DONE,
+ BTMTK_WMT_ON_PROGRESS,
};
struct mtk_stp_hdr {
@@ -58,6 +69,24 @@ struct mtk_hci_wmt_cmd {
u8 data[256];
} __packed;
+struct btmtk_hci_wmt_evt {
+ struct hci_event_hdr hhdr;
+ struct mtk_wmt_hdr whdr;
+} __packed;
+
+struct btmtk_hci_wmt_evt_funcc {
+ struct btmtk_hci_wmt_evt hwhdr;
+ __be16 status;
+} __packed;
+
+struct btmtk_tci_sleep {
+ u8 mode;
+ __le16 duration;
+ __le16 host_duration;
+ u8 host_wakeup_pin;
+ u8 time_compensation;
+} __packed;
+
struct btmtk_hci_wmt_params {
u8 op;
u8 flag;
@@ -76,6 +105,7 @@ struct btmtkuart_dev {
struct sk_buff_head txq;
struct sk_buff *rx_skb;
+ struct sk_buff *evt_skb;
u8 stp_pad[6];
u8 stp_cursor;
@@ -86,9 +116,11 @@ static int mtk_hci_wmt_sync(struct hci_dev *hdev,
struct btmtk_hci_wmt_params *wmt_params)
{
struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
+ struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc;
+ u32 hlen, status = BTMTK_WMT_INVALID;
+ struct btmtk_hci_wmt_evt *wmt_evt;
struct mtk_hci_wmt_cmd wc;
struct mtk_wmt_hdr *hdr;
- u32 hlen;
int err;
hlen = sizeof(*hdr) + wmt_params->dlen;
@@ -133,7 +165,41 @@ static int mtk_hci_wmt_sync(struct hci_dev *hdev,
return -ETIMEDOUT;
}
- return 0;
+ /* Parse and handle the return WMT event */
+ wmt_evt = (struct btmtk_hci_wmt_evt *)bdev->evt_skb->data;
+ if (wmt_evt->whdr.op != hdr->op) {
+ bt_dev_err(hdev, "Wrong op received %d expected %d",
+ wmt_evt->whdr.op, hdr->op);
+ err = -EIO;
+ goto err_free_skb;
+ }
+
+ switch (wmt_evt->whdr.op) {
+ case MTK_WMT_SEMAPHORE:
+ if (wmt_evt->whdr.flag == 2)
+ status = BTMTK_WMT_PATCH_UNDONE;
+ else
+ status = BTMTK_WMT_PATCH_DONE;
+ break;
+ case MTK_WMT_FUNC_CTRL:
+ wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt;
+ if (be16_to_cpu(wmt_evt_funcc->status) == 0x404)
+ status = BTMTK_WMT_ON_DONE;
+ else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420)
+ status = BTMTK_WMT_ON_PROGRESS;
+ else
+ status = BTMTK_WMT_ON_UNDONE;
+ break;
+ }
+
+ if (wmt_params->status)
+ *wmt_params->status = status;
+
+err_free_skb:
+ kfree_skb(bdev->evt_skb);
+ bdev->evt_skb = NULL;
+
+ return err;
}
static int mtk_setup_fw(struct hci_dev *hdev)
@@ -184,13 +250,29 @@ static int mtk_setup_fw(struct hci_dev *hdev)
if (err < 0) {
bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
err);
- break;
+ goto free_fw;
}
fw_size -= dlen;
fw_ptr += dlen;
}
+ wmt_params.op = MTK_WMT_RST;
+ wmt_params.flag = 4;
+ wmt_params.dlen = 0;
+ wmt_params.data = NULL;
+ wmt_params.status = NULL;
+
+ /* Activate funciton the firmware providing to */
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send wmt rst (%d)", err);
+ goto free_fw;
+ }
+
+ /* Wait a few moments for firmware activation done */
+ usleep_range(10000, 12000);
+
free_fw:
release_firmware(fw);
return err;
@@ -209,7 +291,20 @@ static int btmtkuart_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
if (hdr->evt == 0xe4)
hdr->evt = HCI_EV_VENDOR;
+ /* When someone waits for the WMT event, the skb is being cloned
+ * and being processed the events from there then.
+ */
+ if (test_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state)) {
+ bdev->evt_skb = skb_clone(skb, GFP_KERNEL);
+ if (!bdev->evt_skb) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ }
+
err = hci_recv_frame(hdev, skb);
+ if (err < 0)
+ goto err_free_skb;
if (hdr->evt == HCI_EV_VENDOR) {
if (test_and_clear_bit(BTMTKUART_TX_WAIT_VND_EVT,
@@ -220,6 +315,13 @@ static int btmtkuart_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
}
}
+ return 0;
+
+err_free_skb:
+ kfree_skb(bdev->evt_skb);
+ bdev->evt_skb = NULL;
+
+err_out:
return err;
}
@@ -482,28 +584,79 @@ static int btmtkuart_flush(struct hci_dev *hdev)
return 0;
}
+static int btmtkuart_func_query(struct hci_dev *hdev)
+{
+ struct btmtk_hci_wmt_params wmt_params;
+ int status, err;
+ u8 param = 0;
+
+ /* Query whether the function is enabled */
+ wmt_params.op = MTK_WMT_FUNC_CTRL;
+ wmt_params.flag = 4;
+ wmt_params.dlen = sizeof(param);
+ wmt_params.data = ¶m;
+ wmt_params.status = &status;
+
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to query function status (%d)", err);
+ return err;
+ }
+
+ return status;
+}
+
static int btmtkuart_setup(struct hci_dev *hdev)
{
struct btmtk_hci_wmt_params wmt_params;
+ ktime_t calltime, delta, rettime;
+ struct btmtk_tci_sleep tci_sleep;
+ unsigned long long duration;
+ struct sk_buff *skb;
+ int err, status;
u8 param = 0x1;
- int err = 0;
- /* Setup a firmware which the device definitely requires */
- err = mtk_setup_fw(hdev);
- if (err < 0)
- return err;
+ calltime = ktime_get();
- wmt_params.op = MTK_WMT_RST;
- wmt_params.flag = 4;
+ /* Query whether the firmware is already download */
+ wmt_params.op = MTK_WMT_SEMAPHORE;
+ wmt_params.flag = 1;
wmt_params.dlen = 0;
wmt_params.data = NULL;
- wmt_params.status = NULL;
+ wmt_params.status = &status;
- /* Activate funciton the firmware providing to */
err = mtk_hci_wmt_sync(hdev, &wmt_params);
if (err < 0) {
- bt_dev_err(hdev, "Failed to send wmt rst (%d)", err);
+ bt_dev_err(hdev, "Failed to query firmware status (%d)", err);
+ return err;
+ }
+
+ if (status == BTMTK_WMT_PATCH_DONE) {
+ bt_dev_info(hdev, "Firmware already downloaded");
+ goto ignore_setup_fw;
+ }
+
+ /* Setup a firmware which the device definitely requires */
+ err = mtk_setup_fw(hdev);
+ if (err < 0)
return err;
+
+ignore_setup_fw:
+ /* Query whether the device is already enabled */
+ err = readx_poll_timeout(btmtkuart_func_query, hdev, status,
+ status < 0 || status != BTMTK_WMT_ON_PROGRESS,
+ 2000, 5000000);
+ /* -ETIMEDOUT happens */
+ if (err < 0)
+ return err;
+
+ /* The other errors happen in btusb_mtk_func_query */
+ if (status < 0)
+ return status;
+
+ if (status == BTMTK_WMT_ON_DONE) {
+ bt_dev_info(hdev, "function already on");
+ goto ignore_func_on;
}
/* Enable Bluetooth protocol */
@@ -519,6 +672,29 @@ static int btmtkuart_setup(struct hci_dev *hdev)
return err;
}
+ignore_func_on:
+ /* Apply the low power environment setup */
+ tci_sleep.mode = 0x5;
+ tci_sleep.duration = cpu_to_le16(0x640);
+ tci_sleep.host_duration = cpu_to_le16(0x640);
+ tci_sleep.host_wakeup_pin = 0;
+ tci_sleep.time_compensation = 0;
+
+ skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(hdev, "Failed to apply low power setting (%d)", err);
+ return err;
+ }
+ kfree_skb(skb);
+
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long)ktime_to_ns(delta) >> 10;
+
+ bt_dev_info(hdev, "Device setup in %llu usecs", duration);
+
return 0;
}
--
2.18.0
Powered by blists - more mailing lists