| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <56da4c16-2f47-0033-fe60-ad49ccd0758d@gmail.com>
Date: Thu, 14 Feb 2019 11:08:23 +0100
From: Matthias Brugger <matthias.bgg@...il.com>
To: Long Cheng <long.cheng@...iatek.com>,
Vinod Koul <vkoul@...nel.org>,
Randy Dunlap <rdunlap@...radead.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Ryder Lee <ryder.lee@...iatek.com>,
Sean Wang <sean.wang@...nel.org>,
Nicolas Boichat <drinkcat@...omium.org>
Cc: Dan Williams <dan.j.williams@...el.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.com>,
Sean Wang <sean.wang@...iatek.com>, dmaengine@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-serial@...r.kernel.org, srv_heupstream@...iatek.com,
Yingjoe Chen <yingjoe.chen@...iatek.com>,
YT Shen <yt.shen@...iatek.com>,
Zhenbao Liu <zhenbao.liu@...iatek.com>
Subject: Re: [PATCH v10 1/3] dmaengine: 8250_mtk_dma: add MediaTek uart DMA
support
On 18/01/2019 04:10, Long Cheng wrote:
> In DMA engine framework, add 8250 uart dma to support MediaTek uart.
> If MediaTek uart enabled(SERIAL_8250_MT6577), and want to improve
> the performance, can enable the function.
>
> Signed-off-by: Long Cheng <long.cheng@...iatek.com>
> ---
> drivers/dma/mediatek/Kconfig | 11 +
> drivers/dma/mediatek/Makefile | 1 +
> drivers/dma/mediatek/mtk-uart-apdma.c | 669 +++++++++++++++++++++++++++++++++
> 3 files changed, 681 insertions(+)
> create mode 100644 drivers/dma/mediatek/mtk-uart-apdma.c
>
[...]
> +
> +static int mtk_uart_apdma_probe(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct mtk_uart_apdmadev *mtkd;
> + struct resource *res;
> + struct mtk_chan *c;
> + int bit_mask = 32, rc;
> + unsigned int i;
> +
> + mtkd = devm_kzalloc(&pdev->dev, sizeof(*mtkd), GFP_KERNEL);
> + if (!mtkd)
> + return -ENOMEM;
> +
> + mtkd->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(mtkd->clk)) {
> + dev_err(&pdev->dev, "No clock specified\n");
> + rc = PTR_ERR(mtkd->clk);
> + return rc;
> + }
> +
> + if (of_property_read_bool(np, "dma-33bits"))
> + mtkd->support_33bits = true;
dma-33bits not defined in the binding description.
> +
> + if (mtkd->support_33bits)
> + bit_mask = 33;
> +
> + rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(bit_mask));
> + if (rc)
> + return rc;
> +
> + dma_cap_set(DMA_SLAVE, mtkd->ddev.cap_mask);
> + mtkd->ddev.device_alloc_chan_resources =
> + mtk_uart_apdma_alloc_chan_resources;
> + mtkd->ddev.device_free_chan_resources =
> + mtk_uart_apdma_free_chan_resources;
> + mtkd->ddev.device_tx_status = mtk_uart_apdma_tx_status;
> + mtkd->ddev.device_issue_pending = mtk_uart_apdma_issue_pending;
> + mtkd->ddev.device_prep_slave_sg = mtk_uart_apdma_prep_slave_sg;
> + mtkd->ddev.device_config = mtk_uart_apdma_slave_config;
> + mtkd->ddev.device_pause = mtk_uart_apdma_device_pause;
> + mtkd->ddev.device_terminate_all = mtk_uart_apdma_terminate_all;
> + mtkd->ddev.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE);
> + mtkd->ddev.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE);
> + mtkd->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
> + mtkd->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
> + mtkd->ddev.dev = &pdev->dev;
> + INIT_LIST_HEAD(&mtkd->ddev.channels);
> +
> + mtkd->dma_requests = MTK_UART_APDMA_NR_VCHANS;
Do this if dma-requests property is not present.
> + if (of_property_read_u32(np, "dma-requests", &mtkd->dma_requests)) {
It's quite obvious what this does, but IMHO it should be reflected in the binding.
Regards,
Matthias
> + dev_info(&pdev->dev,
> + "Using %u as missing dma-requests property\n",
> + MTK_UART_APDMA_NR_VCHANS);
> + }
> +
> + mtkd->dma_irq = devm_kcalloc(&pdev->dev, mtkd->dma_requests,
> + sizeof(*mtkd->dma_irq), GFP_KERNEL);
> + if (!mtkd->dma_irq)
> + return -ENOMEM;
> +
> + for (i = 0; i < mtkd->dma_requests; i++) {
> + c = devm_kzalloc(mtkd->ddev.dev, sizeof(*c), GFP_KERNEL);
> + if (!c) {
> + rc = -ENODEV;
> + goto err_no_dma;
> + }
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, i);
> + if (!res) {
> + rc = -ENODEV;
> + goto err_no_dma;
> + }
> +
> + c->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(c->base)) {
> + rc = PTR_ERR(c->base);
> + goto err_no_dma;
> + }
> + c->requested = false;
> + c->vc.desc_free = mtk_uart_apdma_desc_free;
> + vchan_init(&c->vc, &mtkd->ddev);
> +
> + mtkd->dma_irq[i] = platform_get_irq(pdev, i);
> + if ((int)mtkd->dma_irq[i] < 0) {
> + dev_err(&pdev->dev, "failed to get IRQ[%d]\n", i);
> + rc = -EINVAL;
> + goto err_no_dma;
> + }
> + }
> +
> + pm_runtime_enable(&pdev->dev);
> + pm_runtime_set_active(&pdev->dev);
> +
> + rc = dma_async_device_register(&mtkd->ddev);
> + if (rc)
> + goto rpm_disable;
> +
> + platform_set_drvdata(pdev, mtkd);
> +
> + /* Device-tree DMA controller registration */
> + rc = of_dma_controller_register(np, of_dma_xlate_by_chan_id, mtkd);
> + if (rc)
> + goto dma_remove;
> +
> + return rc;
> +
> +dma_remove:
> + dma_async_device_unregister(&mtkd->ddev);
> +rpm_disable:
> + pm_runtime_disable(&pdev->dev);
> +err_no_dma:
> + mtk_uart_apdma_free(mtkd);
> + return rc;
> +}
> +
> +static int mtk_uart_apdma_remove(struct platform_device *pdev)
> +{
> + struct mtk_uart_apdmadev *mtkd = platform_get_drvdata(pdev);
> +
> + if (pdev->dev.of_node)
> + of_dma_controller_free(pdev->dev.of_node);
> +
> + pm_runtime_disable(&pdev->dev);
> + pm_runtime_put_noidle(&pdev->dev);
> +
> + dma_async_device_unregister(&mtkd->ddev);
> + mtk_uart_apdma_free(mtkd);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int mtk_uart_apdma_suspend(struct device *dev)
> +{
> + struct mtk_uart_apdmadev *mtkd = dev_get_drvdata(dev);
> +
> + if (!pm_runtime_suspended(dev))
> + clk_disable_unprepare(mtkd->clk);
> +
> + return 0;
> +}
> +
> +static int mtk_uart_apdma_resume(struct device *dev)
> +{
> + int ret;
> + struct mtk_uart_apdmadev *mtkd = dev_get_drvdata(dev);
> +
> + if (!pm_runtime_suspended(dev)) {
> + ret = clk_prepare_enable(mtkd->clk);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +#endif /* CONFIG_PM_SLEEP */
> +
> +#ifdef CONFIG_PM
> +static int mtk_uart_apdma_runtime_suspend(struct device *dev)
> +{
> + struct mtk_uart_apdmadev *mtkd = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(mtkd->clk);
> +
> + return 0;
> +}
> +
> +static int mtk_uart_apdma_runtime_resume(struct device *dev)
> +{
> + int ret;
> + struct mtk_uart_apdmadev *mtkd = dev_get_drvdata(dev);
> +
> + ret = clk_prepare_enable(mtkd->clk);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +#endif /* CONFIG_PM */
> +
> +static const struct dev_pm_ops mtk_uart_apdma_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(mtk_uart_apdma_suspend, mtk_uart_apdma_resume)
> + SET_RUNTIME_PM_OPS(mtk_uart_apdma_runtime_suspend,
> + mtk_uart_apdma_runtime_resume, NULL)
> +};
> +
> +static struct platform_driver mtk_uart_apdma_driver = {
> + .probe = mtk_uart_apdma_probe,
> + .remove = mtk_uart_apdma_remove,
> + .driver = {
> + .name = KBUILD_MODNAME,
> + .pm = &mtk_uart_apdma_pm_ops,
> + .of_match_table = of_match_ptr(mtk_uart_apdma_match),
> + },
> +};
> +
> +module_platform_driver(mtk_uart_apdma_driver);
> +
> +MODULE_DESCRIPTION("MediaTek UART APDMA Controller Driver");
> +MODULE_AUTHOR("Long Cheng <long.cheng@...iatek.com>");
> +MODULE_LICENSE("GPL v2");
> +
>
Powered by blists - more mailing lists