Message-ID: <20190214122840.GA21860@amd>
Date:   Thu, 14 Feb 2019 13:28:40 +0100
From:   Pavel Machek <pavel@....cz>
To:     Hans de Goede <hdegoede@...hat.com>,
        Jacek Anaszewski <j.anaszewski@...sung.com>
Cc:     Yauhen Kharuzhy <jekhor@...il.com>, linux-kernel@...r.kernel.org,
        linux-leds@...r.kernel.org
Subject: Re: [PATCH v2 1/2] leds: Add Intel Cherry Trail Whiskey Cove PMIC
 LEDs

Hi!

Jacek, could we get you to comment here? I'd prefer "hardware" trigger...

> >>That assumes that breathing is the default setting on all hardware
> >>and again I don't see why not to export this functionality to
> >
> >Save the status on boot, then restore it on rmmod/reboot/poweroff? :-).
> 
> Which works until the system freezes one time. I believe that
> if we are going to do a LED driver for the charging LED on these
> devices, we MUST offer a way to put it back in its original
> state, even if the state is foo-barred at bootup.
> 
> >>userspace. Just because something does not fit in the existing
> >>API is IMHO not a good reason to not expose it to userspace.
> >>
> >>I suggest that we deal with this special case by adding 3 custom
> >>sysfs attributes:
> >>
> >>1) "mode" which when read, prints, e.g. :
> >>manual [on-when-charging]
> >
> >While this allows _user on console_ to control everything using echo,
> >it is not suitable for applications trying to control LEDs.
> >
> >As there's nothing special about the case here, I believe we should
> >have generic solution here.
> >
> >My preffered solution would be "hardware" trigger that leaves the LED
> >in hardware control.
> 
> As you explained in the parts which I snipped, there are many
> devices which have a similar choice for a LED being under hw or
> user control. I can see how this looks like a trigger and how we
> could use the trigger API for this.
> 
> I believe though, that if we implement a "virtual" (for lack of
> a better word) trigger for this, that this should be done in the
> LED core. I can envision this working like this:

Agreed about the LED core.

> 1) Add a:
> 
> hw_control_set(struct led_classdev *led_cdev, bool enable_hw_control);
> 
> Callback to struct led_classdev which when implemented by a driver
> like the current PMIC LED controller would do what it says.
> 
> 2) Have the core create and register a virtual hardware trigger the
> first time a LED cdev which has this callback gets registered.
> 
> When configured as the trigger for this LED device this trigger calls
> hw_control_set(cdev, true) and when unregistered calls
> hw_control_set(cdev, false)
> 
> Taking a quick look at the trigger code, a problem with this is
> that normally any trigger can work with any led device, so this
> "hardware" trigger will show up in the list of possible
> triggers for each device.
> 
> This problem can be solved by making the activate method for the
> hardware trigger check the classdev has a hw_control_set callback
> and if not return -EINVAL, or maybe -ENXIO but still this is somewhat
> inconsistent with other triggers, which AFAIK work with any LED.

I guess other option is to modify core so that it does not list
"hardware" trigger for leds that don't support it.

> >Alternatively I could imagine "hardware" sysfs attribute, containing
> >0/1, with 0==software controlled, 1==hardware controlled.
> 
> Hmm, maybe call it "hardware_controlled" instead ? Otherwise this
> would work for me and I would personally prefer this solution. This
> could even be done in the LED core using the hw_control_set callback
> I proposed, to make sure it is handled consistently between devices.

This should be in LED core, yes.

> >The rest of attributes would have to be Cove-specific, yes (but still
> >should fit with the rest of LED subsystem).
> 
> Right, I see that the triggers attribute already uses the fmt where
> on "cat" all options are listed and the current active one has [] around it,
> so I think the pattern and frequency attributes I proposed should work
> well, although thinking more about this I believe the freq. attribute should
> be called pattern_freq to make clear it applies to blinking / breathing
> set through the pattern attribute.

Take a look at blinking trigger. It can already do hardware
acceleration, but uses different format than what you proposed.

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Download attachment "signature.asc" of type "application/pgp-signature" (182 bytes)

Powered by blists - more mailing lists