[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1550159642-26878-1-git-send-email-claudiu.beznea@microchip.com>
Date: Thu, 14 Feb 2019 15:54:26 +0000
From: <Claudiu.Beznea@...rochip.com>
To: <robh+dt@...nel.org>, <mark.rutland@....com>,
<Nicolas.Ferre@...rochip.com>, <alexandre.belloni@...tlin.com>,
<Ludovic.Desroches@...rochip.com>, <linux@...linux.org.uk>,
<mturquette@...libre.com>, <sboyd@...nel.org>
CC: <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-clk@...r.kernel.org>,
<Claudiu.Beznea@...rochip.com>
Subject: [PATCH 0/8] add power management support for SAM9X60
From: Claudiu Beznea <claudiu.beznea@...rochip.com>
Hi,
This series add power management support for SAM9X60. The following
platform specific power management modes were enabled for it:
Idle, ULP0 and ULP1.
Thank you,
Claudiu Beznea
Claudiu Beznea (8):
ARM: at91: pm: introduce at91_soc_pm structure
dt-bindings: arm: atmel: add binding for SAM9X60 SoC
ARM: at91: pm: initial PM support for SAM9X60
ARM: at91: pm: keep at91_pm_backup_init() only for SAMA5D2 SoCs
ARM: at91: pm: add support for per SoC wakeup source configuration
ARM: at91: pm: add ULP1 support for SAM9X60
ARM: at91: pm: disable RC oscillator in ULP0
ARM: at91: pm: do not disable/enable PLLA for ULP modes
.../devicetree/bindings/arm/atmel-at91.txt | 1 +
arch/arm/mach-at91/at91sam9.c | 18 ++
arch/arm/mach-at91/generic.h | 2 +
arch/arm/mach-at91/pm.c | 193 ++++++++++++++-------
arch/arm/mach-at91/pm_suspend.S | 111 ++++++++----
include/linux/clk/at91_pmc.h | 1 +
6 files changed, 232 insertions(+), 94 deletions(-)
--
2.7.4
Powered by blists - more mailing lists