| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1550159642-26878-7-git-send-email-claudiu.beznea@microchip.com>
Date: Thu, 14 Feb 2019 15:54:57 +0000
From: <Claudiu.Beznea@...rochip.com>
To: <robh+dt@...nel.org>, <mark.rutland@....com>,
<Nicolas.Ferre@...rochip.com>, <alexandre.belloni@...tlin.com>,
<Ludovic.Desroches@...rochip.com>, <linux@...linux.org.uk>,
<mturquette@...libre.com>, <sboyd@...nel.org>
CC: <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-clk@...r.kernel.org>,
<Claudiu.Beznea@...rochip.com>
Subject: [PATCH 6/8] ARM: at91: pm: add ULP1 support for SAM9X60
From: Claudiu Beznea <claudiu.beznea@...rochip.com>
Add ULP1 support for SAM9X60. In pm_suspend.S enable RC oscillator in
PMC if it is not enabled. At resume the state before suspend is
restored.
Signed-off-by: Claudiu Beznea <claudiu.beznea@...rochip.com>
---
arch/arm/mach-at91/pm.c | 24 ++++++++++++++++++++++++
arch/arm/mach-at91/pm_suspend.S | 41 ++++++++++++++++++++++++++++++++++++++++-
include/linux/clk/at91_pmc.h | 1 +
3 files changed, 65 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 27264caa4ec6..5571658b3c46 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -100,6 +100,8 @@ static const struct wakeup_source_info ws_info[] = {
{ .pmc_fsmr_bit = AT91_PMC_RTCAL, .shdwc_mr_bit = BIT(17) },
{ .pmc_fsmr_bit = AT91_PMC_USBAL },
{ .pmc_fsmr_bit = AT91_PMC_SDMMC_CD },
+ { .pmc_fsmr_bit = AT91_PMC_RTTAL },
+ { .pmc_fsmr_bit = AT91_PMC_RXLP_MCE },
};
static const struct of_device_id sama5d2_ws_ids[] = {
@@ -114,6 +116,17 @@ static const struct of_device_id sama5d2_ws_ids[] = {
{ /* sentinel */ }
};
+static const struct of_device_id sam9x60_ws_ids[] = {
+ { .compatible = "atmel,at91sam9x5-rtc", .data = &ws_info[1] },
+ { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] },
+ { .compatible = "usb-ohci", .data = &ws_info[2] },
+ { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] },
+ { .compatible = "usb-ehci", .data = &ws_info[2] },
+ { .compatible = "atmel,at91sam9260-rtt", .data = &ws_info[4] },
+ { .compatible = "cdns,sam9x60-macb", .data = &ws_info[5] },
+ { /* sentinel */ }
+};
+
static int at91_pm_config_ws(unsigned int pm_mode, bool set)
{
const struct wakeup_source_info *wsi;
@@ -192,6 +205,13 @@ static int at91_sama5d2_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
return 0;
}
+static int at91_sam9x60_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
+{
+ writel(mode, pmc + AT91_PMC_FSMR);
+
+ return 0;
+}
+
/*
* Called after processes are frozen, but before we shutdown devices.
*/
@@ -789,8 +809,12 @@ void __init sam9x60_pm_init(void)
if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
return;
+ at91_pm_modes_init();
at91_dt_ramc();
at91_pm_init(at91sam9x60_idle);
+
+ soc_pm.ws_ids = sam9x60_ws_ids;
+ soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
}
void __init at91sam9_pm_init(void)
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index bfe1c4d06901..8b18cad1dcf5 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -197,8 +197,26 @@ ENDPROC(at91_backup_mode)
.macro at91_pm_ulp1_mode
ldr pmc, .pmc_base
- /* Switch the main clock source to 12-MHz RC oscillator */
+ /* Save RC oscillator state and check if it is enabled. */
+ ldr tmp1, [pmc, #AT91_PMC_SR]
+ str tmp1, .saved_osc_status
+ tst tmp1, #AT91_PMC_MOSCRCS
+ bne 2f
+
+ /* Enable RC oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
+ orr tmp1, tmp1, #AT91_PMC_MOSCRCEN
+ bic tmp1, tmp1, #AT91_PMC_KEY_MASK
+ orr tmp1, tmp1, #AT91_PMC_KEY
+ str tmp1, [pmc, #AT91_CKGR_MOR]
+
+ /* Wait main RC stabilization */
+1: ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_MOSCRCS
+ beq 1b
+
+ /* Switch the main clock source to 12-MHz RC oscillator */
+2: ldr tmp1, [pmc, #AT91_CKGR_MOR]
bic tmp1, tmp1, #AT91_PMC_MOSCSEL
bic tmp1, tmp1, #AT91_PMC_KEY_MASK
orr tmp1, tmp1, #AT91_PMC_KEY
@@ -262,6 +280,25 @@ ENDPROC(at91_backup_mode)
str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
+
+ /* Restore RC oscillator state */
+ ldr tmp1, .saved_osc_status
+ tst tmp1, #AT91_PMC_MOSCRCS
+ bne 3f
+
+ /* Disable RC oscillator */
+ ldr tmp1, [pmc, #AT91_CKGR_MOR]
+ bic tmp1, tmp1, #AT91_PMC_MOSCRCEN
+ bic tmp1, tmp1, #AT91_PMC_KEY_MASK
+ orr tmp1, tmp1, #AT91_PMC_KEY
+ str tmp1, [pmc, #AT91_CKGR_MOR]
+
+ /* Wait RC oscillator disable done */
+4: ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_MOSCRCS
+ bne 4b
+
+3:
.endm
ENTRY(at91_ulp_mode)
@@ -475,6 +512,8 @@ ENDPROC(at91_sramc_self_refresh)
.word 0
.saved_sam9_mdr1:
.word 0
+.saved_osc_status:
+ .word 0
ENTRY(at91_pm_suspend_in_sram_sz)
.word .-at91_pm_suspend_in_sram
diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h
index 931ab05f771d..bd3a65c0bad3 100644
--- a/include/linux/clk/at91_pmc.h
+++ b/include/linux/clk/at91_pmc.h
@@ -159,6 +159,7 @@
#define AT91_PMC_FSMR 0x70 /* Fast Startup Mode Register */
#define AT91_PMC_FSTT(n) BIT(n)
+#define AT91_PMC_RTTAL BIT(16)
#define AT91_PMC_RTCAL BIT(17) /* RTC Alarm Enable */
#define AT91_PMC_USBAL BIT(18) /* USB Resume Enable */
#define AT91_PMC_SDMMC_CD BIT(19) /* SDMMC Card Detect Enable */
--
2.7.4
Powered by blists - more mailing lists