[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1550210558-30516-1-git-send-email-erin.lo@mediatek.com>
Date: Fri, 15 Feb 2019 14:02:32 +0800
From: Erin Lo <erin.lo@...iatek.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Marc Zyngier <marc.zyngier@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Stephen Boyd <sboyd@...eaurora.org>
CC: <devicetree@...r.kernel.org>,
srv_heupstream <srv_heupstream@...iatek.com>,
<linux-kernel@...r.kernel.org>, <linux-serial@...r.kernel.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-arm-kernel@...ts.infradead.org>,
<yingjoe.chen@...iatek.com>, <erin.lo@...iatek.com>,
<mars.cheng@...iatek.com>, <eddie.huang@...iatek.com>,
<linux-clk@...r.kernel.org>
Subject: [PATCH v7 0/6] Add basic and clock support for Mediatek MT8183 SoC
MT8183 is a SoC based on 64bit ARMv8 architecture.
It contains 4 CA53 and 4 CA73 cores.
MT8183 share many HW IP with MT65xx series.
This patchset was tested on MT8183 evaluation board and use correct clock to shell.
This series contains document bindings, device tree including interrupt, uart, clock,
pinctrl, spi, and pwrap.
Based on v5.0-rc1 and
http://lists.infradead.org/pipermail/linux-mediatek/2018-December/016243.html
Change in v7:
1. Place all the MMIO peripherals under one or more simple-bus nodes
2. Make the pinfunc.h and spi node into seperate patch
3. Modify SPIs pamerater from 4 back to 3
and remove patch "support 4 interrupt parameters for sysirq"
4. Rename intpol-controller to interrupt-controller
5. Rename pinctrl@...0b000 to pinctrl@...05000
Change in v6:
1. Remove power and iommu nodes
2. Fix dtb build warning
3. Fix pinctrl binding doc
4. Fix '_' in node names
Change in v5:
1. Collect all device tree nodes to the last patch
2. Add PMU
3. Add Signed-off-by
4. Remove clock driver code and binding doc
5. Add pinctrl, iommu, spi, and pwrap nodes
Change in v4:
1. Correct syntax error in dtsi
2. Add MT8183 clock support
Change in v3:
1. Fill out GICC, GICH, GICV regions
2. Update Copyright to 2018
Change in v2:
1. Split dt-bindings into different patches 2. Correct bindings for supported SoCs (mtk-uart.txt)
Ben Ho (1):
arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and
Makefile
Erin Lo (4):
dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183
dt-bindings: serial: Add compatible for Mediatek MT8183
arm64: dts: mt8183: add pintcrl file
arm64: dts: mt8183: add spi node
Zhiyong Tao (1):
dt-bindings: pinctrl: mt8183: add binding document
.../interrupt-controller/mediatek,sysirq.txt | 1 +
.../devicetree/bindings/pinctrl/pinctrl-mt8183.txt | 115 ++
.../devicetree/bindings/serial/mtk-uart.txt | 1 +
arch/arm64/boot/dts/mediatek/Makefile | 1 +
arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 136 +++
arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h | 1120 ++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 415 ++++++++
7 files changed, 1789 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt
create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-evb.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h
create mode 100644 arch/arm64/boot/dts/mediatek/mt8183.dtsi
--
1.9.1
Powered by blists - more mailing lists