linux-kernel - Re: [PATCH v2 0/3] arm64: ti: k3-am654: USB support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <d67c23b7-bd1c-c7ae-e878-9437d41e26ff@ti.com>
Date:   Fri, 15 Feb 2019 10:48:08 +0200
From:   Tero Kristo <t-kristo@...com>
To:     Roger Quadros <rogerq@...com>
CC:     <nm@...com>, <nsekhar@...com>, <vigneshr@...com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 0/3] arm64: ti: k3-am654: USB support

On 05/02/2019 14:45, Roger Quadros wrote:
> Hi,
> 
> The AM654 SoC supports 2 DWC3 USB controller instances. The
> AM654 base board supports the 2nd (USB1) instance in high-speed.
> 
> This series enables support for USB1 instance on the AM654-base-board.
> 
> The series depends on [1] and [2]. Both are in the -next branch of their
> respective maintainer trees.
> 
> To test you can apply on top of linux-next. As usb/next was just pushed
> today, it might have not reached linux-next yet. If so please pull that from [3].
> 
> If using arm64 defconfig, you need to enable
> 	CONFIG_USB_DWC3_KEYSTONE=y
> 	CONFIG_OMAP_USB2=y
> and the necessary USB drivers that you want to test. e.g. USB network adapter.
> 
> [1] AM654 USB2 PHY support https://lkml.org/lkml/2018/12/5/908
> [2] AM654 DWC3 support https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1896101.html
> [3] usb-next https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git/log/?h=next
> 
> Changelog:
> v2
> - usb & phy nodes are not kept disabled in k3-am65-main.dtsi.
>    Unused ones are disabled in board dts instead.

Series queued for 5.1, thanks.

-Tero

> 
> cheers,
> -roger
> 
> 
> Jyri Sarha (1):
>    arm64: dts: ti: am654: Add Main System Control Module node
> 
> Roger Quadros (2):
>    arm64: dts: ti: k3-am6: add USB support
>    arm64: dts: ti: k3-am654-base-board: enable USB1
> 
>   arch/arm64/boot/dts/ti/k3-am65-main.dtsi       | 84 ++++++++++++++++++++++++++
>   arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 28 +++++++++
>   2 files changed, 112 insertions(+)
> 

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki