| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <tip-3fa0e83e29488547b39f321fd5a239f08f129c72@git.kernel.org>
Date: Fri, 15 Feb 2019 01:46:34 -0800
From: tip-bot for Mathieu Poirier <tipbot@...or.com>
To: linux-tip-commits@...r.kernel.org
Cc: mingo@...nel.org, acme@...hat.com, jolsa@...hat.com,
peterz@...radead.org, hpa@...or.com, leo.yan@...aro.org,
mathieu.poirier@...aro.org, tglx@...utronix.de,
linux-kernel@...r.kernel.org, suzuki.poulose@....com
Subject: [tip:perf/core] perf cs-etm: Modularize main packet processing loop
Commit-ID: 3fa0e83e29488547b39f321fd5a239f08f129c72
Gitweb: https://git.kernel.org/tip/3fa0e83e29488547b39f321fd5a239f08f129c72
Author: Mathieu Poirier <mathieu.poirier@...aro.org>
AuthorDate: Tue, 12 Feb 2019 10:16:17 -0700
Committer: Arnaldo Carvalho de Melo <acme@...hat.com>
CommitDate: Thu, 14 Feb 2019 15:18:07 -0300
perf cs-etm: Modularize main packet processing loop
Making the main packet processing loop modular so that it can be called
from different decoding context (timeless vs. non-timless), avoiding to
repeat code.
Signed-off-by: Mathieu Poirier <mathieu.poirier@...aro.org>
Cc: Jiri Olsa <jolsa@...hat.com>
Cc: Leo Yan <leo.yan@...aro.org>
Cc: Peter Zijlstra <peterz@...radead.org>
Cc: Suzuki K Poulouse <suzuki.poulose@....com>
Cc: linux-arm-kernel@...ts.infradead.org
Link: http://lkml.kernel.org/r/20190212171618.25355-13-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@...hat.com>
---
tools/perf/util/cs-etm.c | 129 ++++++++++++++++++++++++++---------------------
1 file changed, 72 insertions(+), 57 deletions(-)
diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
index cfa686fe223e..f607bc58bd03 100644
--- a/tools/perf/util/cs-etm.c
+++ b/tools/perf/util/cs-etm.c
@@ -1519,6 +1519,72 @@ out:
return ret;
}
+static int cs_etm__process_decoder_queue(struct cs_etm_queue *etmq)
+{
+ int ret;
+
+ /* Process each packet in this chunk */
+ while (1) {
+ ret = cs_etm_decoder__get_packet(etmq->decoder,
+ etmq->packet);
+ if (ret <= 0)
+ /*
+ * Stop processing this chunk on
+ * end of data or error
+ */
+ break;
+
+ /*
+ * Since packet addresses are swapped in packet
+ * handling within below switch() statements,
+ * thus setting sample flags must be called
+ * prior to switch() statement to use address
+ * information before packets swapping.
+ */
+ ret = cs_etm__set_sample_flags(etmq);
+ if (ret < 0)
+ break;
+
+ switch (etmq->packet->sample_type) {
+ case CS_ETM_RANGE:
+ /*
+ * If the packet contains an instruction
+ * range, generate instruction sequence
+ * events.
+ */
+ cs_etm__sample(etmq);
+ break;
+ case CS_ETM_EXCEPTION:
+ case CS_ETM_EXCEPTION_RET:
+ /*
+ * If the exception packet is coming,
+ * make sure the previous instruction
+ * range packet to be handled properly.
+ */
+ cs_etm__exception(etmq);
+ break;
+ case CS_ETM_DISCONTINUITY:
+ /*
+ * Discontinuity in trace, flush
+ * previous branch stack
+ */
+ cs_etm__flush(etmq);
+ break;
+ case CS_ETM_EMPTY:
+ /*
+ * Should not receive empty packet,
+ * report error.
+ */
+ pr_err("CS ETM Trace: empty packet\n");
+ return -EINVAL;
+ default:
+ break;
+ }
+ }
+
+ return ret;
+}
+
static int cs_etm__run_decoder(struct cs_etm_queue *etmq)
{
int err = 0;
@@ -1544,64 +1610,13 @@ static int cs_etm__run_decoder(struct cs_etm_queue *etmq)
if (err)
return err;
- /* Process each packet in this chunk */
- while (1) {
- err = cs_etm_decoder__get_packet(etmq->decoder,
- etmq->packet);
- if (err <= 0)
- /*
- * Stop processing this chunk on
- * end of data or error
- */
- break;
+ /*
+ * Process each packet in this chunk, nothing to do if
+ * an error occurs other than hoping the next one will
+ * be better.
+ */
+ err = cs_etm__process_decoder_queue(etmq);
- /*
- * Since packet addresses are swapped in packet
- * handling within below switch() statements,
- * thus setting sample flags must be called
- * prior to switch() statement to use address
- * information before packets swapping.
- */
- err = cs_etm__set_sample_flags(etmq);
- if (err < 0)
- break;
-
- switch (etmq->packet->sample_type) {
- case CS_ETM_RANGE:
- /*
- * If the packet contains an instruction
- * range, generate instruction sequence
- * events.
- */
- cs_etm__sample(etmq);
- break;
- case CS_ETM_EXCEPTION:
- case CS_ETM_EXCEPTION_RET:
- /*
- * If the exception packet is coming,
- * make sure the previous instruction
- * range packet to be handled properly.
- */
- cs_etm__exception(etmq);
- break;
- case CS_ETM_DISCONTINUITY:
- /*
- * Discontinuity in trace, flush
- * previous branch stack
- */
- cs_etm__flush(etmq);
- break;
- case CS_ETM_EMPTY:
- /*
- * Should not receive empty packet,
- * report error.
- */
- pr_err("CS ETM Trace: empty packet\n");
- return -EINVAL;
- default:
- break;
- }
- }
} while (etmq->buf_len);
if (err == 0)
Powered by blists - more mailing lists