linux-kernel - [PATCH v2 3/8] dt-bindings: leds: Add binding for axp20x-led device driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 15 Feb 2019 13:50:08 +0200
From:   Stefan Mavrodiev <stefan@...mex.com>
To:     Jacek Anaszewski <jacek.anaszewski@...il.com>,
        Pavel Machek <pavel@....cz>, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Chen-Yu Tsai <wens@...e.org>,
        Maxime Ripard <maxime.ripard@...tlin.com>,
        Lee Jones <lee.jones@...aro.org>,
        linux-leds@...r.kernel.org (open list:LED SUBSYSTEM),
        devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS),
        linux-kernel@...r.kernel.org (open list:X-POWERS MULTIFUNCTION PMIC
        DEVICE DRIVERS),
        linux-arm-kernel@...ts.infradead.org (moderated list:ARM/Allwinner
        sunXi SoC support)
Cc:     Stefan Mavrodiev <stefan@...mex.com>
Subject: [PATCH v2 3/8] dt-bindings: leds: Add binding for axp20x-led device driver

This adds the devicetree bindings for charge led indicator found
on most of X-Powers AXP20X PMICs.

Signed-off-by: Stefan Mavrodiev <stefan@...mex.com>
---
 .../devicetree/bindings/leds/leds-axp20x.txt  | 74 +++++++++++++++++++
 1 file changed, 74 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-axp20x.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-axp20x.txt b/Documentation/devicetree/bindings/leds/leds-axp20x.txt
new file mode 100644
index 000000000000..5a83ad06796d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-axp20x.txt
@@ -0,0 +1,74 @@
+Device Tree Bindings for LED support on X-Powers PMIC
+
+Most of the X-Powers PMICs have integrated battery charger with LED indicator.
+The output is open-drain, so the state is either high-Z or output-low. The
+driver is a subnode of AXP20X MFD driver, since it uses shared bus with all
+other cells.
+The LED can be controlled either manually or automatically. Then in automatic
+(controlled by the charger) there are two indication modes:
+
+Mode-A
+======
+- output-low:		Charging
+- high-Z		Not charging
+- 1Hz flashing:		Abnormal alarm
+- 4Hz flashing		Overvoltage alarm
+
+Mode-B
+======
+- output-low:		Battery full
+- high-Z		Not charging
+- 1Hz flashing:		Charging
+- 4Hz flashing		Overvoltage or abnormal alarm
+
+The control and the mode can be changed from sysfs.
+
+For AXP20X MFD bindings see:
+Documentation/devicetree/bindings/mfd/axp20x.txt
+
+Required properties:
+- compatible : Must be "x-powers,axp20x-led"
+
+Supported common LED properties, see ./common.txt for more informationn
+- label : See Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : See Documentation/devicetree/bindings/leds/common.txt
+- default-state: See Documentation/devicetree/bindings/leds/common.txt
+
+Optional properties:
+- x-powers,charger-mode: 0 for Mode-A, 1 for Mode-B
+			 If omitted, then the control is set to manual mode.
+			 On invalid value, Mode-A is used.
+
+
+Example:
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+
+		...
+
+		led@0 {
+			compatible = "x-powers,axp20x-led";
+			status = "okay";
+
+			label = "axp20x:yellow:chgled";
+			linux,default-trigger = "timer";
+			default-state = "on";
+		};
+	};
+
+or
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+
+		...
+
+		led@0 {
+			compatible = "x-powers,axp20x-led";
+			status = "okay";
+
+			label = "axp20x:yellow:chgled";
+			x-powers,charger-mode = <1>;
+		};
+	};
-- 
2.17.1