| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190215115245.GA29775@e107981-ln.cambridge.arm.com>
Date: Fri, 15 Feb 2019 11:52:45 +0000
From: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
To: Shameer Kolothum <shameerali.kolothum.thodi@...wei.com>
Cc: robin.murphy@....com, andrew.murray@....com,
jean-philippe.brucker@....com, will.deacon@....com,
mark.rutland@....com, guohanjun@...wei.com, john.garry@...wei.com,
pabba@...eaurora.org, vkilari@...eaurora.org,
rruigrok@...eaurora.org, linux-acpi@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linuxarm@...wei.com, neil.m.leeder@...il.com
Subject: Re: [PATCH v6 1/4] acpi: arm64: add iort support for PMCG
On Mon, Feb 04, 2019 at 12:13:21PM +0000, Shameer Kolothum wrote:
> From: Neil Leeder <nleeder@...eaurora.org>
>
> Add support for the SMMU Performance Monitor Counter Group
> information from ACPI. This is in preparation for its use
> in the SMMUv3 PMU driver.
Also, in case I do not get a chance to update it, please run:
git log --oneline --no-merges drivers/acpi/arm64/iort.c
You would notice incosistency in the $SUBJECT, fix it please.
Thanks,
Lorenzo
> Signed-off-by: Neil Leeder <nleeder@...eaurora.org>
> Signed-off-by: Hanjun Guo <guohanjun@...wei.com>
> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@...wei.com>
> Reviewed-by: Robin Murphy <robin.murphy@....com>
> ---
> drivers/acpi/arm64/iort.c | 117 ++++++++++++++++++++++++++++++++++++----------
> include/linux/acpi_iort.h | 6 +++
> 2 files changed, 99 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
> index e48894e..e2c9b26 100644
> --- a/drivers/acpi/arm64/iort.c
> +++ b/drivers/acpi/arm64/iort.c
> @@ -356,7 +356,8 @@ static struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node,
> if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) {
> if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT ||
> node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX ||
> - node->type == ACPI_IORT_NODE_SMMU_V3) {
> + node->type == ACPI_IORT_NODE_SMMU_V3 ||
> + node->type == ACPI_IORT_NODE_PMCG) {
> *id_out = map->output_base;
> return parent;
> }
> @@ -394,6 +395,8 @@ static int iort_get_id_mapping_index(struct acpi_iort_node *node)
> }
>
> return smmu->id_mapping_index;
> + case ACPI_IORT_NODE_PMCG:
> + return 0;
> default:
> return -EINVAL;
> }
> @@ -1218,14 +1221,23 @@ static void __init arm_smmu_v3_init_resources(struct resource *res,
> }
> }
>
> -static bool __init arm_smmu_v3_is_coherent(struct acpi_iort_node *node)
> +static void __init arm_smmu_v3_dma_configure(struct device *dev,
> + struct acpi_iort_node *node)
> {
> struct acpi_iort_smmu_v3 *smmu;
> + enum dev_dma_attr attr;
>
> /* Retrieve SMMUv3 specific data */
> smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
>
> - return smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE;
> + attr = (smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE) ?
> + DEV_DMA_COHERENT : DEV_DMA_NON_COHERENT;
> +
> + /* We expect the dma masks to be equivalent for all SMMUv3 set-ups */
> + dev->dma_mask = &dev->coherent_dma_mask;
> +
> + /* Configure DMA for the page table walker */
> + acpi_dma_configure(dev, attr);
> }
>
> #if defined(CONFIG_ACPI_NUMA)
> @@ -1301,30 +1313,82 @@ static void __init arm_smmu_init_resources(struct resource *res,
> }
> }
>
> -static bool __init arm_smmu_is_coherent(struct acpi_iort_node *node)
> +static void __init arm_smmu_dma_configure(struct device *dev,
> + struct acpi_iort_node *node)
> {
> struct acpi_iort_smmu *smmu;
> + enum dev_dma_attr attr;
>
> /* Retrieve SMMU specific data */
> smmu = (struct acpi_iort_smmu *)node->node_data;
>
> - return smmu->flags & ACPI_IORT_SMMU_COHERENT_WALK;
> + attr = (smmu->flags & ACPI_IORT_SMMU_COHERENT_WALK) ?
> + DEV_DMA_COHERENT : DEV_DMA_NON_COHERENT;
> +
> + /* We expect the dma masks to be equivalent for SMMU set-ups */
> + dev->dma_mask = &dev->coherent_dma_mask;
> +
> + /* Configure DMA for the page table walker */
> + acpi_dma_configure(dev, attr);
> +}
> +
> +static int __init arm_smmu_v3_pmcg_count_resources(struct acpi_iort_node *node)
> +{
> + struct acpi_iort_pmcg *pmcg;
> +
> + /* Retrieve PMCG specific data */
> + pmcg = (struct acpi_iort_pmcg *)node->node_data;
> +
> + /*
> + * There are always 2 memory resources.
> + * If the overflow_gsiv is present then add that for a total of 3.
> + */
> + return pmcg->overflow_gsiv ? 3 : 2;
> +}
> +
> +static void __init arm_smmu_v3_pmcg_init_resources(struct resource *res,
> + struct acpi_iort_node *node)
> +{
> + struct acpi_iort_pmcg *pmcg;
> +
> + /* Retrieve PMCG specific data */
> + pmcg = (struct acpi_iort_pmcg *)node->node_data;
> +
> + res[0].start = pmcg->page0_base_address;
> + res[0].end = pmcg->page0_base_address + SZ_4K - 1;
> + res[0].flags = IORESOURCE_MEM;
> + res[1].start = pmcg->page1_base_address;
> + res[1].end = pmcg->page1_base_address + SZ_4K - 1;
> + res[1].flags = IORESOURCE_MEM;
> +
> + if (pmcg->overflow_gsiv)
> + acpi_iort_register_irq(pmcg->overflow_gsiv, "overflow",
> + ACPI_EDGE_SENSITIVE, &res[2]);
> +}
> +
> +static int __init arm_smmu_v3_pmcg_add_platdata(struct platform_device *pdev)
> +{
> + u32 model = IORT_SMMU_V3_PMCG_GENERIC;
> +
> + return platform_device_add_data(pdev, &model, sizeof(model));
> }
>
> struct iort_dev_config {
> const char *name;
> int (*dev_init)(struct acpi_iort_node *node);
> - bool (*dev_is_coherent)(struct acpi_iort_node *node);
> + void (*dev_dma_configure)(struct device *dev,
> + struct acpi_iort_node *node);
> int (*dev_count_resources)(struct acpi_iort_node *node);
> void (*dev_init_resources)(struct resource *res,
> struct acpi_iort_node *node);
> void (*dev_set_proximity)(struct device *dev,
> struct acpi_iort_node *node);
> + int (*dev_add_platdata)(struct platform_device *pdev);
> };
>
> static const struct iort_dev_config iort_arm_smmu_v3_cfg __initconst = {
> .name = "arm-smmu-v3",
> - .dev_is_coherent = arm_smmu_v3_is_coherent,
> + .dev_dma_configure = arm_smmu_v3_dma_configure,
> .dev_count_resources = arm_smmu_v3_count_resources,
> .dev_init_resources = arm_smmu_v3_init_resources,
> .dev_set_proximity = arm_smmu_v3_set_proximity,
> @@ -1332,9 +1396,16 @@ static const struct iort_dev_config iort_arm_smmu_v3_cfg __initconst = {
>
> static const struct iort_dev_config iort_arm_smmu_cfg __initconst = {
> .name = "arm-smmu",
> - .dev_is_coherent = arm_smmu_is_coherent,
> + .dev_dma_configure = arm_smmu_dma_configure,
> .dev_count_resources = arm_smmu_count_resources,
> - .dev_init_resources = arm_smmu_init_resources
> + .dev_init_resources = arm_smmu_init_resources,
> +};
> +
> +static const struct iort_dev_config iort_arm_smmu_v3_pmcg_cfg __initconst = {
> + .name = "arm-smmu-v3-pmcg",
> + .dev_count_resources = arm_smmu_v3_pmcg_count_resources,
> + .dev_init_resources = arm_smmu_v3_pmcg_init_resources,
> + .dev_add_platdata = arm_smmu_v3_pmcg_add_platdata,
> };
>
> static __init const struct iort_dev_config *iort_get_dev_cfg(
> @@ -1345,6 +1416,8 @@ static __init const struct iort_dev_config *iort_get_dev_cfg(
> return &iort_arm_smmu_v3_cfg;
> case ACPI_IORT_NODE_SMMU:
> return &iort_arm_smmu_cfg;
> + case ACPI_IORT_NODE_PMCG:
> + return &iort_arm_smmu_v3_pmcg_cfg;
> default:
> return NULL;
> }
> @@ -1362,7 +1435,6 @@ static int __init iort_add_platform_device(struct acpi_iort_node *node,
> struct fwnode_handle *fwnode;
> struct platform_device *pdev;
> struct resource *r;
> - enum dev_dma_attr attr;
> int ret, count;
>
> pdev = platform_device_alloc(ops->name, PLATFORM_DEVID_AUTO);
> @@ -1393,19 +1465,19 @@ static int __init iort_add_platform_device(struct acpi_iort_node *node,
> goto dev_put;
>
> /*
> - * Add a copy of IORT node pointer to platform_data to
> - * be used to retrieve IORT data information.
> + * Platform devices based on PMCG nodes uses platform_data to
> + * pass the hardware model info to the driver. For others, add
> + * a copy of IORT node pointer to platform_data to be used to
> + * retrieve IORT data information.
> */
> - ret = platform_device_add_data(pdev, &node, sizeof(node));
> + if (ops->dev_add_platdata)
> + ret = ops->dev_add_platdata(pdev);
> + else
> + ret = platform_device_add_data(pdev, &node, sizeof(node));
> +
> if (ret)
> goto dev_put;
>
> - /*
> - * We expect the dma masks to be equivalent for
> - * all SMMUs set-ups
> - */
> - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
> -
> fwnode = iort_get_fwnode(node);
>
> if (!fwnode) {
> @@ -1415,11 +1487,8 @@ static int __init iort_add_platform_device(struct acpi_iort_node *node,
>
> pdev->dev.fwnode = fwnode;
>
> - attr = ops->dev_is_coherent && ops->dev_is_coherent(node) ?
> - DEV_DMA_COHERENT : DEV_DMA_NON_COHERENT;
> -
> - /* Configure DMA for the page table walker */
> - acpi_dma_configure(&pdev->dev, attr);
> + if (ops->dev_dma_configure)
> + ops->dev_dma_configure(&pdev->dev, node);
>
> iort_set_device_domain(&pdev->dev, node);
>
> diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
> index 38cd77b..832bd6a 100644
> --- a/include/linux/acpi_iort.h
> +++ b/include/linux/acpi_iort.h
> @@ -26,6 +26,12 @@
> #define IORT_IRQ_MASK(irq) (irq & 0xffffffffULL)
> #define IORT_IRQ_TRIGGER_MASK(irq) ((irq >> 32) & 0xffffffffULL)
>
> +/*
> + * PMCG model identifiers for use in smmu pmu driver. Please note
> + * that, this is not part of the IORT specification.
> + */
> +#define IORT_SMMU_V3_PMCG_GENERIC 0x00000000 /* Generic SMMUv3 PMCG */
> +
> int iort_register_domain_token(int trans_id, phys_addr_t base,
> struct fwnode_handle *fw_node);
> void iort_deregister_domain_token(int trans_id);
> --
> 2.7.4
>
>
Powered by blists - more mailing lists