linux-kernel - [PATCH v3 2/3] dt-bindings: input: Refer to touchscreen.txt for goodix ts

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <99085b90c327193f6bdb9b0a505daa6a9848e1c6.1550239328.git.agx@sigxcpu.org>
Date:   Fri, 15 Feb 2019 15:11:52 +0100
From:   Guido Günther <agx@...xcpu.org>
To:     Dmitry Torokhov <dmitry.torokhov@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Bastien Nocera <hadess@...ess.net>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Guido Günther <agx@...xcpu.org>,
        linux-input@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org
Subject: [PATCH v3 2/3] dt-bindings: input: Refer to touchscreen.txt for goodix ts

Refer to touchscreen.txt for generic touch properties. This avoids
duplication and we're using the generic code to parse these in the
driver. While at that add touchscreen-size-{x,y} which are respected by
the driver as well.

Signed-off-by: Guido Günther <agx@...xcpu.org>
---
 .../bindings/input/touchscreen/goodix.txt           | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
index 57d3d8870a09..8cf0b4d38a7e 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
@@ -19,11 +19,14 @@ Optional properties:
  - irq-gpios		: GPIO pin used for IRQ. The driver uses the
 			  interrupt gpio pin as output to reset the device.
  - reset-gpios		: GPIO pin used for reset
-
- - touchscreen-inverted-x  : X axis is inverted (boolean)
- - touchscreen-inverted-y  : Y axis is inverted (boolean)
- - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
-                             (swapping is done after inverting the axis)
+ - touchscreen-inverted-x
+ - touchscreen-inverted-y
+ - touchscreen-size-x
+ - touchscreen-size-y
+ - touchscreen-swapped-x-y
+
+The touchscreen-* properties are documented in touchscreen.txt in this
+directory.
 
 Example:
 
-- 
2.20.1