lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Fri, 15 Feb 2019 10:53:35 -0500 From: Yangtao Li <tiny.windzz@...il.com> To: maxime.ripard@...tlin.com, wens@...e.org, robh+dt@...nel.org, mark.rutland@....com Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, Yangtao Li <tiny.windzz@...il.com> Subject: [PATCH v3 1/4] arm64: dts: allwinner: h6: orangepi: Add CPU supply regulator The original orangepi use the dcdca to supply the CPU cores. According to the axp805 spec, the range of dcdca is 0.6 to 1.1v, 1.12 to 1.52v. In order to support more CPU frequency, slightly increase the voltage maximum and minimum. In fact, in sunxi's sdk, the actual minimum and maximum voltage of the cpu is smaller or larger than the datasheet. For some better quality ic, the minimum voltage can be smaller. For some poor quality ic, the maximum voltage needs to be increased a little. Signed-off-by: Yangtao Li <tiny.windzz@...il.com> --- arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi index b2526dac2fcf..e7aebaf91ede 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi @@ -159,8 +159,8 @@ reg_dcdca: dcdca { regulator-always-on; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <1080000>; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1160000>; regulator-name = "vdd-cpu"; }; @@ -191,6 +191,10 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdca>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; -- 2.17.0
Powered by blists - more mailing lists