[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190218001726.16785-8-digetx@gmail.com>
Date: Mon, 18 Feb 2019 03:17:25 +0300
From: Dmitry Osipenko <digetx@...il.com>
To: Russell King <linux@...linux.org.uk>,
Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Robert Yang <decatf@...il.com>,
Michał Mirosław <mirq-linux@...e.qmqm.pl>
Cc: linux-arm-kernel@...ts.infradead.org, linux-tegra@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v4 7/8] ARM: tegra: Support L2 cache maintenance done via firmware
Trusted Foundations firmware require MMU to be enabled for L2 cache
maintenance on Tegra30, hence perform the maintenance early/late on
suspend-resume respectively.
Signed-off-by: Dmitry Osipenko <digetx@...il.com>
---
arch/arm/mach-tegra/pm.c | 36 ++++++++++++++++++++++++++++++++++++
arch/arm/mach-tegra/sleep.S | 11 +++++++----
2 files changed, 43 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index 1ad5719779b0..66c8cd63dd86 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -38,6 +38,7 @@
#include <asm/smp_plat.h>
#include <asm/suspend.h>
#include <asm/tlbflush.h>
+#include <asm/trusted_foundations.h>
#include "iomap.h"
#include "pm.h"
@@ -195,8 +196,27 @@ void tegra_idle_lp2_last(void)
cpu_cluster_pm_enter();
suspend_cpu_complex();
+ /*
+ * L2 cache disabling using kernel API only allowed when all
+ * secondary CPU's are offline. Cache have to be disabled early
+ * if cache maintenance is done via Trusted Foundations firmware.
+ * Note that CPUIDLE won't ever enter powergate on Tegra30 if any
+ * of secondary CPU's is online and this is the LP2 codepath only
+ * for Tegra20/30.
+ */
+ if (trusted_foundations_registered())
+ outer_disable();
+
cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
+ /*
+ * Resume L2 cache if it wasn't re-enabled early during resume,
+ * which is the case for Tegra30 that has to re-enable the cache
+ * via firmware call. In other cases cache is already enabled and
+ * hence re-enabling is a no-op.
+ */
+ outer_resume();
+
restore_cpu_complex();
cpu_cluster_pm_exit();
}
@@ -340,8 +360,24 @@ static int tegra_suspend_enter(suspend_state_t state)
break;
}
+ /*
+ * Cache have to be disabled early if cache maintenance is done
+ * via Trusted Foundations firmware. Otherwise this is a no-op,
+ * like on Tegra114+.
+ */
+ if (trusted_foundations_registered())
+ outer_disable();
+
cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, tegra_sleep_func);
+ /*
+ * Resume L2 cache if it wasn't re-enabled early during resume,
+ * which is the case for Tegra30 that has to re-enable the cache
+ * via firmware call. In other cases cache is already enabled and
+ * hence re-enabling is a no-op.
+ */
+ outer_resume();
+
switch (mode) {
case TEGRA_SUSPEND_LP1:
tegra_suspend_exit_lp1();
diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S
index 5e3496753df1..0a8086d5a47a 100644
--- a/arch/arm/mach-tegra/sleep.S
+++ b/arch/arm/mach-tegra/sleep.S
@@ -132,10 +132,13 @@ ENTRY(tegra_shut_off_mmu)
#ifdef CONFIG_CACHE_L2X0
/* Disable L2 cache */
check_cpu_part_num 0xc09, r9, r10
- movweq r2, #:lower16:(TEGRA_ARM_PERIF_BASE + 0x3000)
- movteq r2, #:upper16:(TEGRA_ARM_PERIF_BASE + 0x3000)
- moveq r3, #0
- streq r3, [r2, #L2X0_CTRL]
+ retne r0
+
+ mov32 r2, TEGRA_ARM_PERIF_BASE + 0x3000
+ ldr r3, [r2, #L2X0_CTRL]
+ mov r9, #0
+ tst r3, #1
+ strne r9, [r2, #L2X0_CTRL]
#endif
ret r0
ENDPROC(tegra_shut_off_mmu)
--
2.20.1
Powered by blists - more mailing lists