lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [day] [month] [year] [list]
Date:   Mon, 18 Feb 2019 13:29:10 +0530
From:   Shubhrajyoti Datta <shubhrajyoti.datta@...il.com>
To:     "sxauwsk@....com" <sxauwsk@....com>
Cc:     "michal.simek" <michal.simek@...inx.com>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        linux-i2c <linux-i2c@...r.kernel.org>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        Shubhrajyoti Datta <shubhrajyoti.datta@...inx.com>
Subject: Re: Re: [PATCH] i2c: cadence: try reset when master receive error interrupts

On Mon, Feb 18, 2019 at 12:48 PM sxauwsk@....com <sxauwsk@....com> wrote:
>
> Hi , Shubhrajyoti
>
> >Hi ,
> >On Sat, Feb 16, 2019 at 1:21 PM sxauwsk@....com <sxauwsk@....com> wrote:
> >>
> >> >Hi Sxauwsk,
> >> >
> >> >On Wed, Jan 30, 2019 at 3:13 PM sxauwsk <sxauwsk@....com> wrote:
> >> >>
> >> >> When the adapter receive error interrupts, such as NACK, arbitration lost,
> >> >> cdns_i2c_master_xfer return to the caller directly instead of resuming
> >> >> the adapter which resulted in the adapter being out of control.
> >> >>
> >> >> So when driver detect err_status then try to repair and fix it.
> >> >>
> >> >> Signed-off-by: sxauwsk <sxauwsk@....com>
> >> >> ---
> >> >>  drivers/i2c/busses/i2c-cadence.c | 12 +++++++-----
> >> >>  1 file changed, 7 insertions(+), 5 deletions(-)
> >> >>
> >> >> diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
> >> >> index b13605718291..e10048d7524a 100644
> >> >> --- a/drivers/i2c/busses/i2c-cadence.c
> >> >> +++ b/drivers/i2c/busses/i2c-cadence.c
> >> >> @@ -548,10 +548,6 @@ static int cdns_i2c_process_msg(struct cdns_i2c *id, struct i2c_msg *msg,
> >> >>         cdns_i2c_writereg(CDNS_I2C_IXR_ALL_INTR_MASK,
> >> >>                           CDNS_I2C_IDR_OFFSET);
> >> >>
> >> >> -       /* If it is bus arbitration error, try again */
> >> >> -       if (id->err_status & CDNS_I2C_IXR_ARB_LOST)
> >> >> -               return -EAGAIN;
> >> >> -
> >> >>         return 0;
> >> >>  }
> >> >>
> >> >> @@ -617,13 +613,19 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
> >> >>                         id->bus_hold_flag = 0;
> >> >>
> >> >>                 ret = cdns_i2c_process_msg(id, msgs, adap);
> >> >> -               if (ret)
> >> >> +               if (!ret)
> >> >>                         goto out;
> >> >>
> >> >In case  the Arbitration error happend  the cdns_i2c_process_msg would return 0
> >> >and we will miss the check  below.
> >> >
> >> >Am I missing something ?
> >> >
> >> >>                 /* Report the other error interrupts to application */
> >> >>                 if (id->err_status) {
> >> >>                         cdns_i2c_master_reset(adap);
> >> >>
> >> >> +                       /* If it is bus arbitration error, try again */
> >> >> +                       if (id->err_status & CDNS_I2C_IXR_ARB_LOST) {
> >> >> +                               ret = -EAGAIN;
> >> >> +                               goto out;
> >> >> +                       }
> >> >> +
> >> >>                         if (id->err_status & CDNS_I2C_IXR_NACK) {
> >> >>                                 ret = -ENXIO;
> >> >>                                 goto out;
> >> >> --
> >> >> 2.19.2
> >> >>
> >> >>
> >>
> >> In cdns_i2c_process_msg process, when detect arbitration lost error return -EAGAIN to  cdns_i2c_master_xfer,  not return 0
> >> that mean cdns_i2c_process_msg  just go out ignore error check and  problem occur, So we should do something when arbitration error detect.
> >
> >Arbitration lost is fine how about other errors like NACK.
>
> >> >>                 ret = cdns_i2c_process_msg(id, msgs, adap);
> >> >> -               if (ret)
> >> >> +               if (!ret)
> >> >>                         goto out;
>
> Yes, you're right,  This place I should't make any change,  perfect solution!
>
> >> >>
> >> >> -       /* If it is bus arbitration error, try again */
> >> >> -       if (id->err_status & CDNS_I2C_IXR_ARB_LOST)
> >> >> -               return -EAGAIN;
> >> >> -
> >> >>         return 0;
> >> >>  }
>
>
> >> >>                 /* Report the other error interrupts to application */
> >> >>                 if (id->err_status) {
> >> >>                         cdns_i2c_master_reset(adap);
> >> >>
> >> >> +                       /* If it is bus arbitration error, try again */
> >> >> +                       if (id->err_status & CDNS_I2C_IXR_ARB_LOST) {
> >> >> +                               ret = -EAGAIN;
> >> >> +                               goto out;
> >> >> +                       }
> >> >> +
>
> Maybe Just remove Arbitration lost Detect part from  cdns_i2c_process_msg function,  then add to cdns_i2c_master_xfer,  Do you think?

I agree.
>
>
>
>

Powered by blists - more mailing lists