lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190218133502.872282920@linuxfoundation.org>
Date:   Mon, 18 Feb 2019 14:43:25 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Gilad Ben-Yossef <gilad@...yossef.com>,
        Vincent Guittot <vincent.guittot@...aro.org>,
        Herbert Xu <herbert@...dor.apana.org.au>, stable@...nel.org
Subject: [PATCH 4.20 82/92] crypto: ccree - fix resume race condition on init

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gilad Ben-Yossef <gilad@...yossef.com>

commit 1358c13a48c43f5e4de0c1835291837a27b9720c upstream.

We were enabling autosuspend, which is using data set by the
hash module, prior to the hash module being inited, casuing
a crash on resume as part of the startup sequence if the race
was lost.

This was never a real problem because the PM infra was using low
res timers so we were always winning the race, until commit 8234f6734c5d
("PM-runtime: Switch autosuspend over to using hrtimers") changed that :-)

Fix this by seperating the PM setup and enablement and doing the
latter only at the end of the init sequence.

Signed-off-by: Gilad Ben-Yossef <gilad@...yossef.com>
Cc: Vincent Guittot <vincent.guittot@...aro.org>
Cc: stable@...nel.org # v4.20
Signed-off-by: Herbert Xu <herbert@...dor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/crypto/ccree/cc_driver.c |    7 ++++---
 drivers/crypto/ccree/cc_pm.c     |   13 ++++++-------
 drivers/crypto/ccree/cc_pm.h     |    3 +++
 3 files changed, 13 insertions(+), 10 deletions(-)

--- a/drivers/crypto/ccree/cc_driver.c
+++ b/drivers/crypto/ccree/cc_driver.c
@@ -364,7 +364,7 @@ static int init_cc_resources(struct plat
 	rc = cc_ivgen_init(new_drvdata);
 	if (rc) {
 		dev_err(dev, "cc_ivgen_init failed\n");
-		goto post_power_mgr_err;
+		goto post_buf_mgr_err;
 	}
 
 	/* Allocate crypto algs */
@@ -387,6 +387,9 @@ static int init_cc_resources(struct plat
 		goto post_hash_err;
 	}
 
+	/* All set, we can allow autosuspend */
+	cc_pm_go(new_drvdata);
+
 	/* If we got here and FIPS mode is enabled
 	 * it means all FIPS test passed, so let TEE
 	 * know we're good.
@@ -401,8 +404,6 @@ post_cipher_err:
 	cc_cipher_free(new_drvdata);
 post_ivgen_err:
 	cc_ivgen_fini(new_drvdata);
-post_power_mgr_err:
-	cc_pm_fini(new_drvdata);
 post_buf_mgr_err:
 	 cc_buffer_mgr_fini(new_drvdata);
 post_req_mgr_err:
--- a/drivers/crypto/ccree/cc_pm.c
+++ b/drivers/crypto/ccree/cc_pm.c
@@ -100,20 +100,19 @@ int cc_pm_put_suspend(struct device *dev
 
 int cc_pm_init(struct cc_drvdata *drvdata)
 {
-	int rc = 0;
 	struct device *dev = drvdata_to_dev(drvdata);
 
 	/* must be before the enabling to avoid resdundent suspending */
 	pm_runtime_set_autosuspend_delay(dev, CC_SUSPEND_TIMEOUT);
 	pm_runtime_use_autosuspend(dev);
 	/* activate the PM module */
-	rc = pm_runtime_set_active(dev);
-	if (rc)
-		return rc;
-	/* enable the PM module*/
-	pm_runtime_enable(dev);
+	return pm_runtime_set_active(dev);
+}
 
-	return rc;
+/* enable the PM module*/
+void cc_pm_go(struct cc_drvdata *drvdata)
+{
+	pm_runtime_enable(drvdata_to_dev(drvdata));
 }
 
 void cc_pm_fini(struct cc_drvdata *drvdata)
--- a/drivers/crypto/ccree/cc_pm.h
+++ b/drivers/crypto/ccree/cc_pm.h
@@ -16,6 +16,7 @@
 extern const struct dev_pm_ops ccree_pm;
 
 int cc_pm_init(struct cc_drvdata *drvdata);
+void cc_pm_go(struct cc_drvdata *drvdata);
 void cc_pm_fini(struct cc_drvdata *drvdata);
 int cc_pm_suspend(struct device *dev);
 int cc_pm_resume(struct device *dev);
@@ -29,6 +30,8 @@ static inline int cc_pm_init(struct cc_d
 	return 0;
 }
 
+static void cc_pm_go(struct cc_drvdata *drvdata) {}
+
 static inline void cc_pm_fini(struct cc_drvdata *drvdata) {}
 
 static inline int cc_pm_suspend(struct device *dev)


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ