linux-kernel - Re: [PATCH v6 01/22] dt-bindings: mediatek: Add binding for mt8183 IOMMU and SMI

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 19 Feb 2019 15:28:54 -0800
From:   Evan Green <evgreen@...omium.org>
To:     Yong Wu <yong.wu@...iatek.com>
Cc:     Joerg Roedel <joro@...tes.org>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Robin Murphy <robin.murphy@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Tomasz Figa <tfiga@...gle.com>,
        Will Deacon <will.deacon@....com>,
        linux-mediatek@...ts.infradead.org, srv_heupstream@...iatek.com,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>, LKML <linux-kernel@...r.kernel.org>,
        linux-arm-kernel@...ts.infradead.org,
        iommu@...ts.linux-foundation.org, yingjoe.chen@...iatek.com,
        youlin.pei@...iatek.com, Nicolas Boichat <drinkcat@...omium.org>,
        anan.sun@...iatek.com, Matthias Kaehlcke <mka@...omium.org>
Subject: Re: [PATCH v6 01/22] dt-bindings: mediatek: Add binding for mt8183
 IOMMU and SMI

On Sun, Feb 17, 2019 at 1:06 AM Yong Wu <yong.wu@...iatek.com> wrote:
>
> This patch adds decriptions for mt8183 IOMMU and SMI.
>
> mt8183 has only one M4U like mt8173 and is also MTK IOMMU gen2 which
> uses ARM Short-Descriptor translation table format.
>
> The mt8183 M4U-SMI HW diagram is as below:
>
>                           EMI
>                            |
>                           M4U
>                            |
>                        ----------
>                        |        |
>                    gals0-rx   gals1-rx
>                        |        |
>                        |        |
>                    gals0-tx   gals1-tx
>                        |        |
>                       ------------
>                        SMI Common
>                       ------------
>                            |
>   +-----+-----+--------+-----+-----+-------+-------+
>   |     |     |        |     |     |       |       |
>   |     |  gals-rx  gals-rx  |   gals-rx gals-rx gals-rx
>   |     |     |        |     |     |       |       |
>   |     |     |        |     |     |       |       |
>   |     |  gals-tx  gals-tx  |   gals-tx gals-tx gals-tx
>   |     |     |        |     |     |       |       |
> larb0 larb1  IPU0    IPU1  larb4  larb5  larb6    CCU
> disp  vdec   img     cam    venc   img    cam
>
> All the connections are HW fixed, SW can NOT adjust it.
>
> Compared with mt8173, we add a GALS(Global Async Local Sync) module
> between SMI-common and M4U, and additional GALS between larb2/3/5/6
> and SMI-common. GALS can help synchronize for the modules in different
> clock frequency, it can be seen as a "asynchronous fifo".
>
> GALS can only help transfer the command/data while it doesn't have
> the configuring register, thus it has the special "smi" clock and it
> doesn't have the "apb" clock. From the diagram above, we add "gals0"
> and "gals1" clocks for smi-common and add a "gals" clock for smi-larb.
>
> From the diagram above, IPU0/IPU1(Image Processor Unit) and CCU(Camera
> Control Unit) is connected with smi-common directly, we can take them
> as "larb2", "larb3" and "larb7", and their register spaces are
> different with the normal larb.
>
> Signed-off-by: Yong Wu <yong.wu@...iatek.com>

Reviewed-by: Evan Green <evgreen@...omium.org>