linux-kernel - [RFC PATCH 1/5] mtd: cfi_cmdset_0002: Add support for polling status register

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190219063607.29949-2-vigneshr@ti.com>
Date:   Tue, 19 Feb 2019 12:06:03 +0530
From:   Vignesh R <vigneshr@...com>
To:     Vignesh R <vigneshr@...com>, David Woodhouse <dwmw2@...radead.org>,
        Brian Norris <computersforpeace@...il.com>,
        Boris Brezillon <bbrezillon@...nel.org>,
        Marek Vasut <marek.vasut@...il.com>,
        Richard Weinberger <richard@....at>,
        Rob Herring <robh+dt@...nel.org>
CC:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Arnd Bergmann <arnd@...db.de>, <linux-mtd@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <tudor.ambarus@...rochip.com>, <nsekhar@...com>
Subject: [RFC PATCH 1/5] mtd: cfi_cmdset_0002: Add support for polling status register

HyperFlash devices are compliant with CFI AMD/Fujitsu Extended Command
Set(0x0002) for flash operations, therefore drivers/mtd/chips/cfi_cmdset_0002.c
can be use as is. But these devices do not support DQ polling method of
determining chip ready/good status. These flashes provide Status
Register whose bits can be polled to know status of flash operation.

Cypress HyperFlash datasheet here[1], talks about CFI Amd/Fujitsu
Extended Query version 1.5. Bit 0 of "Software Features supported" field
of CFI Primary Vendor-Specific Extended Query table indicates
presence/absence of status register and Bit 1 indicates whether or not
DQ polling is supported. Using these bits, its possible to determine
whether flash supports DQ polling or need to use Status Register.

Add support for polling status register to know device ready/status of
erase/write operations when DQ polling is not supported.

[1] https://www.cypress.com/file/213346/download

Signed-off-by: Vignesh R <vigneshr@...com>
---

Note: PRI extended query table size is bigger on 1.5 than on older
revision. Not sure if this causes problems on older rev. because of
reading beyond current size.

 drivers/mtd/chips/cfi_cmdset_0002.c | 50 +++++++++++++++++++++++++++++
 include/linux/mtd/cfi.h             |  5 +++
 2 files changed, 55 insertions(+)

diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 72428b6bfc47..7a4ef0237750 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -49,6 +49,14 @@
 #define SST49LF008A		0x005a
 #define AT49BV6416		0x00d6
 
+/*
+ * Bits of Status Register definition for flash devices that don't
+ * support DQ polling (Eg.: Hyperflash)
+ */
+#define CFI_SR_DRB		BIT(7)
+#define CFI_SR_ESB		BIT(5)
+#define CFI_SR_PSB		BIT(4)
+
 static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
 static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -97,6 +105,18 @@ static struct mtd_chip_driver cfi_amdstd_chipdrv = {
 	.module		= THIS_MODULE
 };
 
+/*
+ * Use status register to poll for Erase/write completion when DQ is not
+ * supported. This is indicated by Bit[1:0] of SoftwareFeatures field in
+ * CFI Primary Vendor-Specific Extended Query table 1.5
+ */
+static int cfi_use_status_reg(struct cfi_private *cfi)
+{
+	struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
+
+	return (extp->MinorVersion >= '5') &&
+		((extp->SoftwareFeatures & 0x11) == 1);
+}
 
 /* #define DEBUG_CFI_FEATURES */
 
@@ -744,8 +764,21 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
  */
 static int __xipram chip_ready(struct map_info *map, unsigned long addr)
 {
+	struct cfi_private *cfi = map->fldrv_priv;
 	map_word d, t;
 
+	if (cfi_use_status_reg(cfi)) {
+		/*
+		 * For chips that support status register, check device
+		 * ready bit
+		 */
+		cfi_send_gen_cmd(0x70, cfi->addr_unlock1, 0, map, cfi,
+				 cfi->device_type, NULL);
+		d = map_read(map, addr);
+
+		return (d.x[0] & CFI_SR_DRB);
+	}
+
 	d = map_read(map, addr);
 	t = map_read(map, addr);
 
@@ -769,8 +802,25 @@ static int __xipram chip_ready(struct map_info *map, unsigned long addr)
  */
 static int __xipram chip_good(struct map_info *map, unsigned long addr, map_word expected)
 {
+	struct cfi_private *cfi = map->fldrv_priv;
 	map_word oldd, curd;
 
+	if (cfi_use_status_reg(cfi)) {
+		/*
+		 * For chips that support status register, check device
+		 * ready bit and Erase/Program status bit to know if
+		 * operation succeeded.
+		 */
+		cfi_send_gen_cmd(0x70, cfi->addr_unlock1, 0, map, cfi,
+				 cfi->device_type, NULL);
+		curd = map_read(map, addr);
+
+		if (curd.x[0] & CFI_SR_DRB)
+			return !(curd.x[0] & (CFI_SR_PSB | CFI_SR_ESB));
+
+		return 0;
+	}
+
 	oldd = map_read(map, addr);
 	curd = map_read(map, addr);
 
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
index cbf77168658c..92ac82ac2329 100644
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -233,6 +233,11 @@ struct cfi_pri_amdstd {
 	uint8_t  VppMin;
 	uint8_t  VppMax;
 	uint8_t  TopBottom;
+	/* Below field are added from version 1.5 */
+	uint8_t  ProgramSuspend;
+	uint8_t  UnlockBypass;
+	uint8_t  SecureSiliconSector;
+	uint8_t  SoftwareFeatures;
 } __packed;
 
 /* Vendor-Specific PRI for Atmel chips (command set 0x0002) */
-- 
2.20.1