lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <da5bd01dc41301c83d7f321a082a0b2973934a14.1550569066.git.joabreu@synopsys.com>
Date:   Tue, 19 Feb 2019 10:38:48 +0100
From:   Jose Abreu <jose.abreu@...opsys.com>
To:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Jose Abreu <jose.abreu@...opsys.com>,
        Joao Pinto <joao.pinto@...opsys.com>,
        "David S . Miller" <davem@...emloft.net>,
        Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...com>
Subject: [PATCH net-next v3 2/3] net: stmmac: dwmac4: Also use TBU interrupt to clean TX path

TBU interrupt is a normal interrupt and can be used to trigger the
cleaning of TX path. Lets check if it's active in DMA interrupt handler.

While at it, refactor a little bit the function:
	- Don't check if RI is enabled because at function exit we will
	  only clear the interrupts that are enabled so, no event will be
	  missed.

In my tests with GMAC5 this increased performance.

Signed-off-by: Jose Abreu <joabreu@...opsys.com>
Cc: Joao Pinto <jpinto@...opsys.com>
Cc: David S. Miller <davem@...emloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@...com>
Cc: Alexandre Torgue <alexandre.torgue@...com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c | 24 +++++++-----------------
 1 file changed, 7 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
index 49f5687879df..545cb9c47433 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
@@ -124,9 +124,9 @@ void dwmac4_disable_dma_irq(void __iomem *ioaddr, u32 chan)
 int dwmac4_dma_interrupt(void __iomem *ioaddr,
 			 struct stmmac_extra_stats *x, u32 chan)
 {
-	int ret = 0;
-
 	u32 intr_status = readl(ioaddr + DMA_CHAN_STATUS(chan));
+	u32 intr_en = readl(ioaddr + DMA_CHAN_INTR_ENA(chan));
+	int ret = 0;
 
 	/* ABNORMAL interrupts */
 	if (unlikely(intr_status & DMA_CHAN_STATUS_AIS)) {
@@ -151,16 +151,11 @@ int dwmac4_dma_interrupt(void __iomem *ioaddr,
 	if (likely(intr_status & DMA_CHAN_STATUS_NIS)) {
 		x->normal_irq_n++;
 		if (likely(intr_status & DMA_CHAN_STATUS_RI)) {
-			u32 value;
-
-			value = readl(ioaddr + DMA_CHAN_INTR_ENA(chan));
-			/* to schedule NAPI on real RIE event. */
-			if (likely(value & DMA_CHAN_INTR_ENA_RIE)) {
-				x->rx_normal_irq_n++;
-				ret |= handle_rx;
-			}
+			x->rx_normal_irq_n++;
+			ret |= handle_rx;
 		}
-		if (likely(intr_status & DMA_CHAN_STATUS_TI)) {
+		if (likely(intr_status & (DMA_CHAN_STATUS_TI |
+					  DMA_CHAN_STATUS_TBU))) {
 			x->tx_normal_irq_n++;
 			ret |= handle_tx;
 		}
@@ -168,12 +163,7 @@ int dwmac4_dma_interrupt(void __iomem *ioaddr,
 			x->rx_early_irq++;
 	}
 
-	/* Clear the interrupt by writing a logic 1 to the chanX interrupt
-	 * status [21-0] expect reserved bits [5-3]
-	 */
-	writel((intr_status & 0x3fffc7),
-	       ioaddr + DMA_CHAN_STATUS(chan));
-
+	writel(intr_status & intr_en, ioaddr + DMA_CHAN_STATUS(chan));
 	return ret;
 }
 
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ