lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1550570647-9555-5-git-send-email-p.paillet@st.com>
Date:   Tue, 19 Feb 2019 10:04:33 +0000
From:   Pascal PAILLET-LME <p.paillet@...com>
To:     "lgirdwood@...il.com" <lgirdwood@...il.com>,
        "broonie@...nel.org" <broonie@...nel.org>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "mark.rutland@....com" <mark.rutland@....com>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "axel.lin@...ics.com" <axel.lin@...ics.com>
CC:     Pascal PAILLET-LME <p.paillet@...com>,
        "benjamin.gaignard@...aro.org" <benjamin.gaignard@...aro.org>,
        "linux-stm32@...md-mailman.stormreply.com" 
        <linux-stm32@...md-mailman.stormreply.com>
Subject: [PATCH 4/8] dt-bindings: regulator: remove regulator pull-down
 support for stpmic1

Regulator high pull down are enabled by default so remove support in the
driver.

Signed-off-by: Pascal Paillet <p.paillet@...com>
---
 Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt | 2 --
 1 file changed, 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
index de27897..bf9385b 100644
--- a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
@@ -23,8 +23,6 @@ Switches are fixed voltage regulators with only enable/disable capability.
 Optional properties:
 - st,mask-reset: mask reset for this regulator: the regulator configuration
   is maintained during pmic reset.
-- regulator-pull-down: enable high pull down
-  if not specified light pull down is used
 - regulator-over-current-protection:
     if set, all regulators are switched off in case of over-current detection
     on this regulator,
-- 
1.9.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ