| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190219103233.564804918@infradead.org>
Date: Tue, 19 Feb 2019 11:32:00 +0100
From: Peter Zijlstra <peterz@...radead.org>
To: will.deacon@....com, aneesh.kumar@...ux.vnet.ibm.com,
akpm@...ux-foundation.org, npiggin@...il.com
Cc: linux-arch@...r.kernel.org, linux-mm@...ck.org,
linux-kernel@...r.kernel.org, peterz@...radead.org,
linux@...linux.org.uk, heiko.carstens@...ibm.com, riel@...riel.com,
"David S. Miller" <davem@...emloft.net>,
Michal Simek <monstr@...str.eu>, Helge Deller <deller@....de>,
Greentime Hu <green.hu@...il.com>,
Richard Henderson <rth@...ddle.net>,
Ley Foon Tan <lftan@...era.com>,
Jonas Bonn <jonas@...thpole.se>,
Mark Salter <msalter@...hat.com>,
Richard Kuo <rkuo@...eaurora.org>,
Vineet Gupta <vgupta@...opsys.com>,
Paul Burton <paul.burton@...s.com>,
Max Filippov <jcmvbkbc@...il.com>, Guan Xuetao <gxt@....edu.cn>
Subject: [PATCH v6 12/18] arch/tlb: Clean up simple architectures
For the architectures that do not implement their own tlb_flush() but
do already use the generic mmu_gather, there are two options:
1) the platform has an efficient flush_tlb_range() and
asm-generic/tlb.h doesn't need any overrides at all.
2) the platform lacks an efficient flush_tlb_range() and
we select MMU_GATHER_NO_RANGE to minimize full invalidates.
Convert all 'simple' architectures to one of these two forms.
alpha: has no range invalidate -> 2
arc: already used flush_tlb_range() -> 1
c6x: has no range invalidate -> 2
hexagon: has an efficient flush_tlb_range() -> 1
(flush_tlb_mm() is in fact a full range invalidate,
so no need to shoot down everything)
m68k: has inefficient flush_tlb_range() -> 2
microblaze: has no flush_tlb_range() -> 2
mips: has efficient flush_tlb_range() -> 1
(even though it currently seems to use flush_tlb_mm())
nds32: already uses flush_tlb_range() -> 1
nios2: has inefficient flush_tlb_range() -> 2
(no limit on range iteration)
openrisc: has inefficient flush_tlb_range() -> 2
(no limit on range iteration)
parisc: already uses flush_tlb_range() -> 1
sparc32: already uses flush_tlb_range() -> 1
unicore32: has inefficient flush_tlb_range() -> 2
(no limit on range iteration)
xtensa: has efficient flush_tlb_range() -> 1
Note this also fixes a bug in the existing code for a number
platforms. Those platforms that did:
tlb_end_vma() -> if (!full_mm) flush_tlb_*()
tlb_flush -> if (full_mm) flush_tlb_mm()
missed the case of shift_arg_pages(), which doesn't have @fullmm set,
nor calls into tlb_*vma(), but still frees page-tables and thus needs
an invalidate. The new code handles this by detecting a non-empty
range, and either issuing the matching range invalidate or a full
invalidate, depending on the capabilities.
Cc: Nick Piggin <npiggin@...il.com>
Cc: "David S. Miller" <davem@...emloft.net>
Cc: Michal Simek <monstr@...str.eu>
Cc: Helge Deller <deller@....de>
Cc: Greentime Hu <green.hu@...il.com>
Cc: Richard Henderson <rth@...ddle.net>
Cc: Andrew Morton <akpm@...ux-foundation.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@...ux.vnet.ibm.com>
Cc: Will Deacon <will.deacon@....com>
Cc: Ley Foon Tan <lftan@...era.com>
Cc: Jonas Bonn <jonas@...thpole.se>
Cc: Mark Salter <msalter@...hat.com>
Cc: Richard Kuo <rkuo@...eaurora.org>
Cc: Vineet Gupta <vgupta@...opsys.com>
Cc: Paul Burton <paul.burton@...s.com>
Cc: Max Filippov <jcmvbkbc@...il.com>
Cc: Guan Xuetao <gxt@....edu.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@...radead.org>
---
arch/alpha/Kconfig | 1 +
arch/alpha/include/asm/tlb.h | 6 ------
arch/arc/include/asm/tlb.h | 23 -----------------------
arch/c6x/Kconfig | 1 +
arch/c6x/include/asm/tlb.h | 2 --
arch/h8300/include/asm/tlb.h | 2 --
arch/hexagon/include/asm/tlb.h | 12 ------------
arch/m68k/Kconfig | 1 +
arch/m68k/include/asm/tlb.h | 14 --------------
arch/microblaze/Kconfig | 1 +
arch/microblaze/include/asm/tlb.h | 9 ---------
arch/mips/include/asm/tlb.h | 8 --------
arch/nds32/include/asm/tlb.h | 10 ----------
arch/nios2/Kconfig | 1 +
arch/nios2/include/asm/tlb.h | 8 ++++----
arch/openrisc/Kconfig | 1 +
arch/openrisc/include/asm/tlb.h | 8 ++------
arch/parisc/include/asm/tlb.h | 13 -------------
arch/sparc/include/asm/tlb_32.h | 13 -------------
arch/unicore32/Kconfig | 1 +
arch/unicore32/include/asm/tlb.h | 7 +++----
arch/xtensa/include/asm/tlb.h | 17 -----------------
22 files changed, 16 insertions(+), 143 deletions(-)
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -36,6 +36,7 @@ config ALPHA
select ODD_RT_SIGACTION
select OLD_SIGSUSPEND
select CPU_NO_EFFICIENT_FFS if !ALPHA_EV67
+ select MMU_GATHER_NO_RANGE
help
The Alpha is a 64-bit general-purpose processor designed and
marketed by the Digital Equipment Corporation of blessed memory,
--- a/arch/alpha/include/asm/tlb.h
+++ b/arch/alpha/include/asm/tlb.h
@@ -2,12 +2,6 @@
#ifndef _ALPHA_TLB_H
#define _ALPHA_TLB_H
-#define tlb_start_vma(tlb, vma) do { } while (0)
-#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, pte, addr) do { } while (0)
-
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
#include <asm-generic/tlb.h>
#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, pte)
--- a/arch/arc/include/asm/tlb.h
+++ b/arch/arc/include/asm/tlb.h
@@ -9,29 +9,6 @@
#ifndef _ASM_ARC_TLB_H
#define _ASM_ARC_TLB_H
-#define tlb_flush(tlb) \
-do { \
- if (tlb->fullmm) \
- flush_tlb_mm((tlb)->mm); \
-} while (0)
-
-/*
- * This pair is called at time of munmap/exit to flush cache and TLB entries
- * for mappings being torn down.
- * 1) cache-flush part -implemented via tlb_start_vma( ) for VIPT aliasing D$
- * 2) tlb-flush part - implemted via tlb_end_vma( ) flushes the TLB range
- *
- * Note, read http://lkml.org/lkml/2004/1/15/6
- */
-
-#define tlb_end_vma(tlb, vma) \
-do { \
- if (!tlb->fullmm) \
- flush_tlb_range(vma, vma->vm_start, vma->vm_end); \
-} while (0)
-
-#define __tlb_remove_tlb_entry(tlb, ptep, address)
-
#include <linux/pagemap.h>
#include <asm-generic/tlb.h>
--- a/arch/c6x/Kconfig
+++ b/arch/c6x/Kconfig
@@ -19,6 +19,7 @@ config C6X
select GENERIC_CLOCKEVENTS
select MODULES_USE_ELF_RELA
select ARCH_NO_COHERENT_DMA_MMAP
+ select MMU_GATHER_NO_RANGE if MMU
config MMU
def_bool n
--- a/arch/c6x/include/asm/tlb.h
+++ b/arch/c6x/include/asm/tlb.h
@@ -2,8 +2,6 @@
#ifndef _ASM_C6X_TLB_H
#define _ASM_C6X_TLB_H
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
#include <asm-generic/tlb.h>
#endif /* _ASM_C6X_TLB_H */
--- a/arch/h8300/include/asm/tlb.h
+++ b/arch/h8300/include/asm/tlb.h
@@ -2,8 +2,6 @@
#ifndef __H8300_TLB_H__
#define __H8300_TLB_H__
-#define tlb_flush(tlb) do { } while (0)
-
#include <asm-generic/tlb.h>
#endif
--- a/arch/hexagon/include/asm/tlb.h
+++ b/arch/hexagon/include/asm/tlb.h
@@ -22,18 +22,6 @@
#include <linux/pagemap.h>
#include <asm/tlbflush.h>
-/*
- * We don't need any special per-pte or per-vma handling...
- */
-#define tlb_start_vma(tlb, vma) do { } while (0)
-#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
-
-/*
- * .. because we flush the whole mm when it fills up
- */
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
#include <asm-generic/tlb.h>
#endif
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -27,6 +27,7 @@ config M68K
select OLD_SIGSUSPEND3
select OLD_SIGACTION
select ARCH_DISCARD_MEMBLOCK
+ select MMU_GATHER_NO_RANGE if MMU
config CPU_BIG_ENDIAN
def_bool y
--- a/arch/m68k/include/asm/tlb.h
+++ b/arch/m68k/include/asm/tlb.h
@@ -2,20 +2,6 @@
#ifndef _M68K_TLB_H
#define _M68K_TLB_H
-/*
- * m68k doesn't need any special per-pte or
- * per-vma handling..
- */
-#define tlb_start_vma(tlb, vma) do { } while (0)
-#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
-
-/*
- * .. because we flush the whole mm when it
- * fills up.
- */
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
#include <asm-generic/tlb.h>
#endif /* _M68K_TLB_H */
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -40,6 +40,7 @@ config MICROBLAZE
select TRACING_SUPPORT
select VIRT_TO_BUS
select CPU_NO_EFFICIENT_FFS
+ select MMU_GATHER_NO_RANGE if MMU
# Endianness selection
choice
--- a/arch/microblaze/include/asm/tlb.h
+++ b/arch/microblaze/include/asm/tlb.h
@@ -11,16 +11,7 @@
#ifndef _ASM_MICROBLAZE_TLB_H
#define _ASM_MICROBLAZE_TLB_H
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
#include <linux/pagemap.h>
-
-#ifdef CONFIG_MMU
-#define tlb_start_vma(tlb, vma) do { } while (0)
-#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
-#endif
-
#include <asm-generic/tlb.h>
#endif /* _ASM_MICROBLAZE_TLB_H */
--- a/arch/mips/include/asm/tlb.h
+++ b/arch/mips/include/asm/tlb.h
@@ -5,14 +5,6 @@
#include <asm/cpu-features.h>
#include <asm/mipsregs.h>
-#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
-
-/*
- * .. because we flush the whole mm when it fills up.
- */
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
#define _UNIQUE_ENTRYHI(base, idx) \
(((base) + ((idx) << (PAGE_SHIFT + 1))) | \
(cpu_has_tlbinv ? MIPS_ENTRYHI_EHINV : 0))
--- a/arch/nds32/include/asm/tlb.h
+++ b/arch/nds32/include/asm/tlb.h
@@ -4,16 +4,6 @@
#ifndef __ASMNDS32_TLB_H
#define __ASMNDS32_TLB_H
-#define tlb_end_vma(tlb,vma) \
- do { \
- if(!tlb->fullmm) \
- flush_tlb_range(vma, vma->vm_start, vma->vm_end); \
- } while (0)
-
-#define __tlb_remove_tlb_entry(tlb, pte, addr) do { } while (0)
-
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
#include <asm-generic/tlb.h>
#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, pte)
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -23,6 +23,7 @@ config NIOS2
select USB_ARCH_HAS_HCD if USB_SUPPORT
select CPU_NO_EFFICIENT_FFS
select ARCH_DISCARD_MEMBLOCK
+ select MMU_GATHER_NO_RANGE if MMU
config GENERIC_CSUM
def_bool y
--- a/arch/nios2/include/asm/tlb.h
+++ b/arch/nios2/include/asm/tlb.h
@@ -11,12 +11,12 @@
#ifndef _ASM_NIOS2_TLB_H
#define _ASM_NIOS2_TLB_H
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
extern void set_mmu_pid(unsigned long pid);
-#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+/*
+ * NIOS32 does have flush_tlb_range(), but it lacks a limit and fallback to
+ * full mm invalidation. So use flush_tlb_mm() for everything.
+ */
#include <linux/pagemap.h>
#include <asm-generic/tlb.h>
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -35,6 +35,7 @@ config OPENRISC
select OMPIC if SMP
select ARCH_WANT_FRAME_POINTERS
select GENERIC_IRQ_MULTI_HANDLER
+ select MMU_GATHER_NO_RANGE if MMU
config CPU_BIG_ENDIAN
def_bool y
--- a/arch/openrisc/include/asm/tlb.h
+++ b/arch/openrisc/include/asm/tlb.h
@@ -20,14 +20,10 @@
#define __ASM_OPENRISC_TLB_H__
/*
- * or32 doesn't need any special per-pte or
- * per-vma handling..
+ * OpenRISC doesn't have an efficient flush_tlb_range() so use flush_tlb_mm()
+ * for everything.
*/
-#define tlb_start_vma(tlb, vma) do { } while (0)
-#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
#include <linux/pagemap.h>
#include <asm-generic/tlb.h>
--- a/arch/parisc/include/asm/tlb.h
+++ b/arch/parisc/include/asm/tlb.h
@@ -2,19 +2,6 @@
#ifndef _PARISC_TLB_H
#define _PARISC_TLB_H
-#define tlb_flush(tlb) \
-do { if ((tlb)->fullmm) \
- flush_tlb_mm((tlb)->mm);\
-} while (0)
-
-#define tlb_end_vma(tlb, vma) \
-do { if (!(tlb)->fullmm) \
- flush_tlb_range(vma, vma->vm_start, vma->vm_end); \
-} while (0)
-
-#define __tlb_remove_tlb_entry(tlb, pte, address) \
- do { } while (0)
-
#include <asm-generic/tlb.h>
#define __pmd_free_tlb(tlb, pmd, addr) pmd_free((tlb)->mm, pmd)
--- a/arch/sparc/include/asm/tlb_32.h
+++ b/arch/sparc/include/asm/tlb_32.h
@@ -2,19 +2,6 @@
#ifndef _SPARC_TLB_H
#define _SPARC_TLB_H
-#define tlb_end_vma(tlb, vma) \
-do { \
- flush_tlb_range(vma, vma->vm_start, vma->vm_end); \
-} while (0)
-
-#define __tlb_remove_tlb_entry(tlb, pte, address) \
- do { } while (0)
-
-#define tlb_flush(tlb) \
-do { \
- flush_tlb_mm((tlb)->mm); \
-} while (0)
-
#include <asm-generic/tlb.h>
#endif /* _SPARC_TLB_H */
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -20,6 +20,7 @@ config UNICORE32
select GENERIC_IOMAP
select MODULES_USE_ELF_REL
select NEED_DMA_MAP_STATE
+ select MMU_GATHER_NO_RANGE if MMU
help
UniCore-32 is 32-bit Instruction Set Architecture,
including a series of low-power-consumption RISC chip
--- a/arch/unicore32/include/asm/tlb.h
+++ b/arch/unicore32/include/asm/tlb.h
@@ -12,10 +12,9 @@
#ifndef __UNICORE_TLB_H__
#define __UNICORE_TLB_H__
-#define tlb_start_vma(tlb, vma) do { } while (0)
-#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+/*
+ * unicore32 lacks an efficient flush_tlb_range(), use flush_tlb_mm().
+ */
#define __pte_free_tlb(tlb, pte, addr) \
do { \
--- a/arch/xtensa/include/asm/tlb.h
+++ b/arch/xtensa/include/asm/tlb.h
@@ -14,23 +14,6 @@
#include <asm/cache.h>
#include <asm/page.h>
-#if (DCACHE_WAY_SIZE <= PAGE_SIZE)
-
-# define tlb_end_vma(tlb,vma) do { } while (0)
-
-#else
-
-# define tlb_end_vma(tlb, vma) \
- do { \
- if (!tlb->fullmm) \
- flush_tlb_range(vma, vma->vm_start, vma->vm_end); \
- } while(0)
-
-#endif
-
-#define __tlb_remove_tlb_entry(tlb,pte,addr) do { } while (0)
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
#include <asm-generic/tlb.h>
#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, pte)
Powered by blists - more mailing lists