| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 19 Feb 2019 12:05:57 -0800
From: Matthias Kaehlcke <mka@...omium.org>
To: Marcel Holtmann <marcel@...tmann.org>,
Johan Hedberg <johan.hedberg@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Loic Poulain <loic.poulain@...aro.org>
Cc: linux-bluetooth@...r.kernel.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org,
Balakrishna Godavarthi <bgodavar@...eaurora.org>,
Matthias Kaehlcke <mka@...omium.org>
Subject: [PATCH v4 1/3] Bluetooth: Add quirk for reading BD_ADDR from fwnode property
Add HCI_QUIRK_USE_BDADDR_PROPERTY to allow controllers to retrieve
the public Bluetooth address from the firmware node property
'local-bd-address'. If quirk is set and the property does not exist
or is invalid the controller is marked as unconfigured.
Signed-off-by: Matthias Kaehlcke <mka@...omium.org>
Reviewed-by: Balakrishna Godavarthi <bgodavar@...eaurora.org>
Tested-by: Balakrishna Godavarthi <bgodavar@...eaurora.org>
---
Changes in v4:
- none
Changes in v3:
- return no value from hci_dev_get_bd_addr_from_property() since
currently nobody uses it anyway
- use bacpy() in hci_dev_get_bd_addr_from_property()
- return -EADDRNOTAVAIL if no BD_ADDR is configured or if the driver
has no ->set_bdaddr
Changes in v2:
- added check for return value of ->setup()
- only read BD_ADDR from the property if it isn't assigned yet. This
is needed to support configuration from user space
- refactored the branch of the new quirk to get rid of 'bd_addr_set'
- added 'Reviewed-by: Balakrishna Godavarthi <bgodavar@...eaurora.org>' tag
---
include/net/bluetooth/hci.h | 12 +++++++++++
net/bluetooth/hci_core.c | 43 +++++++++++++++++++++++++++++++++++++
net/bluetooth/mgmt.c | 6 ++++--
3 files changed, 59 insertions(+), 2 deletions(-)
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index c36dc1e20556a..fbba43e9bef5b 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -158,6 +158,18 @@ enum {
*/
HCI_QUIRK_INVALID_BDADDR,
+ /* When this quirk is set, the public Bluetooth address
+ * initially reported by HCI Read BD Address command
+ * is considered invalid. The public BD Address can be
+ * specified in the fwnode property 'local-bd-address'.
+ * If this property does not exist or is invalid controller
+ * configuration is required before this device can be used.
+ *
+ * This quirk can be set before hci_register_dev is called or
+ * during the hdev->setup vendor callback.
+ */
+ HCI_QUIRK_USE_BDADDR_PROPERTY,
+
/* When this quirk is set, the duplicate filtering during
* scanning is based on Bluetooth devices addresses. To allow
* RSSI based updates, restart scanning if needed.
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 26e3d36aee298..d6b2540ba7f8b 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -30,6 +30,7 @@
#include <linux/rfkill.h>
#include <linux/debugfs.h>
#include <linux/crypto.h>
+#include <linux/property.h>
#include <asm/unaligned.h>
#include <net/bluetooth/bluetooth.h>
@@ -1355,6 +1356,32 @@ int hci_inquiry(void __user *arg)
return err;
}
+/**
+ * hci_dev_get_bd_addr_from_property - Get the Bluetooth Device Address
+ * (BD_ADDR) for a HCI device from
+ * a firmware node property.
+ * @hdev: The HCI device
+ *
+ * Search the firmware node for 'local-bd-address'.
+ *
+ * All-zero BD addresses are rejected, because those could be properties
+ * that exist in the firmware tables, but were not updated by the firmware. For
+ * example, the DTS could define 'local-bd-address', with zero BD addresses.
+ */
+static void hci_dev_get_bd_addr_from_property(struct hci_dev *hdev)
+{
+ struct fwnode_handle *fwnode = dev_fwnode(hdev->dev.parent);
+ bdaddr_t ba;
+ int ret;
+
+ ret = fwnode_property_read_u8_array(fwnode, "local-bd-address",
+ (u8 *)&ba, sizeof(ba));
+ if (ret < 0 || !bacmp(&ba, BDADDR_ANY))
+ return;
+
+ bacpy(&hdev->public_addr, &ba);
+}
+
static int hci_dev_do_open(struct hci_dev *hdev)
{
int ret = 0;
@@ -1422,6 +1449,22 @@ static int hci_dev_do_open(struct hci_dev *hdev)
if (hdev->setup)
ret = hdev->setup(hdev);
+ if (ret)
+ goto setup_failed;
+
+ if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) {
+ if (!bacmp(&hdev->public_addr, BDADDR_ANY))
+ hci_dev_get_bd_addr_from_property(hdev);
+
+ if (bacmp(&hdev->public_addr, BDADDR_ANY) &&
+ hdev->set_bdaddr)
+ ret = hdev->set_bdaddr(hdev,
+ &hdev->public_addr);
+ else
+ ret = -EADDRNOTAVAIL;
+ }
+
+setup_failed:
/* The transport driver can set these quirks before
* creating the HCI device or in its setup callback.
*
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index ccce954f81468..fae84353d030f 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -551,7 +551,8 @@ static bool is_configured(struct hci_dev *hdev)
!hci_dev_test_flag(hdev, HCI_EXT_CONFIGURED))
return false;
- if (test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) &&
+ if ((test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) ||
+ test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) &&
!bacmp(&hdev->public_addr, BDADDR_ANY))
return false;
@@ -566,7 +567,8 @@ static __le32 get_missing_options(struct hci_dev *hdev)
!hci_dev_test_flag(hdev, HCI_EXT_CONFIGURED))
options |= MGMT_OPTION_EXTERNAL_CONFIG;
- if (test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) &&
+ if ((test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) ||
+ test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) &&
!bacmp(&hdev->public_addr, BDADDR_ANY))
options |= MGMT_OPTION_PUBLIC_ADDRESS;
--
2.21.0.rc0.258.g878e2cd30e-goog
Powered by blists - more mailing lists