linux-kernel - [PATCH v3 7/9] dt-bindings: serial: Add Milbeaut serial driver description

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1550648677-11164-1-git-send-email-sugaya.taichi@socionext.com>
Date:   Wed, 20 Feb 2019 16:44:37 +0900
From:   Sugaya Taichi <sugaya.taichi@...ionext.com>
To:     linux-serial@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        soc@...nel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Takao Orito <orito.takao@...ionext.com>,
        Kazuhiro Kasai <kasai.kazuhiro@...ionext.com>,
        Shinji Kanematsu <kanematsu.shinji@...ionext.com>,
        Jassi Brar <jaswinder.singh@...aro.org>,
        Masami Hiramatsu <masami.hiramatsu@...aro.org>,
        Sugaya Taichi <sugaya.taichi@...ionext.com>
Subject: [PATCH v3 7/9] dt-bindings: serial: Add Milbeaut serial driver description

Add DT bindings document for Milbeaut serial driver.

Signed-off-by: Sugaya Taichi <sugaya.taichi@...ionext.com>
---
 .../devicetree/bindings/serial/milbeaut-uart.txt    | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/serial/milbeaut-uart.txt

diff --git a/Documentation/devicetree/bindings/serial/milbeaut-uart.txt b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
new file mode 100644
index 0000000..3d2fb1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
@@ -0,0 +1,21 @@
+Socionext Milbeaut UART controller
+
+Required properties:
+- compatible: should be "socionext,milbeaut-usio-uart".
+- reg: offset and length of the register set for the device.
+- interrupts: two interrupts specifier.
+- interrupt-names: should be "rx", "tx".
+- clocks: phandle to the input clock.
+
+Optional properties:
+- auto-flow-control: flow control enable.
+
+Example:
+	usio1: usio_uart@...00010 {
+		compatible = "socionext,milbeaut-usio-uart";
+		reg = <0x1e700010 0x10>;
+		interrupts = <0 141 0x4>, <0 149 0x4>;
+		interrupt-names = "rx", "tx";
+		clocks = <&clk 2>;
+		auto-flow-control;
+	};
-- 
1.9.1