lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 20 Feb 2019 16:04:02 +0530
From:   Srinath Mannam <srinath.mannam@...adcom.com>
To:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Kishon Vijay Abraham I <kishon@...com>
Cc:     Tejun Heo <tj@...nel.org>,
        Jayachandran C <jnair@...iumnetworks.com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        bcm-kernel-feedback-list@...adcom.com,
        Srinath Mannam <srinath.mannam@...adcom.com>
Subject: [PATCH v4 3/3] arm64: dts: Add USB DT nodes for Stingray SoC

Add DT nodes for
  - Two xHCI host controllers
  - Two BDC Broadcom USB device controller
  - Five USB PHY controllers

[xHCI0]      [BDC0]            [xHCI1]            [BDC1]
   |           |                  |                 |
  ---------------               -----------------------
   |           |                 |         |         |
[SS-PHY0]   [HS-PHY0]        [SS-PHY1] [HS-PHY2] [HS-PHY1]

[SS-PHY0/HS-PHY0] and [SS-PHY1/HS-PHY1] are combo PHYs has one SS and
one HS PHYs. [HS-PHY2] is a single HS PHY.

xHCI use SS-PHY to detect SS devices and HS-PHY to detect HS/FS/LS
devices. BDC use SS-PHY in SS mode and HS-PHY in HS mode.

xHCI0 port1 is SS-PHY0, port2 is HS-PHY0.
xHCI1 port1 is SS-PHY1, port2 is HS-PHY2 and port3 is HS-PHY1.

Signed-off-by: Srinath Mannam <srinath.mannam@...adcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
Reviewed-by: Scott Branden <scott.branden@...adcom.com>
---
 .../boot/dts/broadcom/stingray/stingray-usb.dtsi   | 95 ++++++++++++++++++++++
 .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |  1 +
 2 files changed, 96 insertions(+)
 create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
new file mode 100644
index 0000000..c0748ee
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+/*
+ *Copyright(c) 2018 Broadcom
+ */
+	usb {
+		compatible = "simple-bus";
+		dma-ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x68500000 0x00400000>;
+
+		usbphy0: usb-phy@0 {
+			compatible = "brcm,sr-usb-combo-phy";
+			reg = <0x00000000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			usb0_phy0: phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+			usb0_phy1: phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+
+		};
+
+		xhci0: usb@...0 {
+			compatible = "generic-xhci";
+			reg = <0x00001000 0x1000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb0_phy1>, <&usb0_phy0>;
+			phy-names = "phy0", "phy1";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		bdc0: usb@...0 {
+			compatible = "brcm,bdc-v0.16";
+			reg = <0x00002000 0x1000>;
+			interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb0_phy1>, <&usb0_phy0>;
+			phy-names = "phy0", "phy1";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		usbphy1: usb-phy@...00 {
+			compatible = "brcm,sr-usb-combo-phy";
+			reg = <0x00010000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			usb1_phy0: phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+			usb1_phy1: phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		usbphy2: usb-phy@...00 {
+			compatible = "brcm,sr-usb-hs-phy";
+			reg = <0x00020000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		xhci1: usb@...00 {
+			compatible = "generic-xhci";
+			reg = <0x00011000 0x1000>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb1_phy1>, <&usbphy2>, <&usb1_phy0>;
+			phy-names = "phy0", "phy1", "phy2";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		bdc1: usb@...00 {
+			compatible = "brcm,bdc-v0.16";
+			reg = <0x00021000 0x1000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphy2>;
+			phy-names = "phy0";
+			dma-coherent;
+			status = "disabled";
+		};
+	};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index cfeaa85..21dbb12 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -287,6 +287,7 @@
 	#include "stingray-fs4.dtsi"
 	#include "stingray-sata.dtsi"
 	#include "stingray-pcie.dtsi"
+	#include "stingray-usb.dtsi"
 
 	hsls {
 		compatible = "simple-bus";
-- 
2.7.4

Powered by blists - more mailing lists