[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190220021429.4910-1-andrew.smirnov@gmail.com>
Date: Tue, 19 Feb 2019 18:14:29 -0800
From: Andrey Smirnov <andrew.smirnov@...il.com>
To: Shawn Guo <shawnguo@...nel.org>
Cc: Andrey Smirnov <andrew.smirnov@...il.com>,
Lucas Stach <l.stach@...gutronix.de>,
Chris Healy <cphealy@...il.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH] soc: imx: gpcv2: Make use of regmap_read_poll_timeout()
Replace explicit polling loop with a call to
regmap_read_poll_timeout() to avoid code repetition. Also fix
misspelled "failed" while at it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@...il.com>
Cc: Lucas Stach <l.stach@...gutronix.de>
Cc: Chris Healy <cphealy@...il.com>
Cc: linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org
---
drivers/soc/imx/gpcv2.c | 39 ++++++++++++++-------------------------
1 file changed, 14 insertions(+), 25 deletions(-)
diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 176f473127b6..e06bf12a1e4b 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -136,8 +136,8 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
GPC_PU_PGC_SW_PUP_REQ : GPC_PU_PGC_SW_PDN_REQ;
const bool enable_power_control = !on;
const bool has_regulator = !IS_ERR(domain->regulator);
- unsigned long deadline;
int i, ret = 0;
+ u32 pxx_req;
regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
domain->bits.map, domain->bits.map);
@@ -169,30 +169,19 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
* As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
* for PUP_REQ/PDN_REQ bit to be cleared
*/
- deadline = jiffies + msecs_to_jiffies(1);
- while (true) {
- u32 pxx_req;
-
- regmap_read(domain->regmap, offset, &pxx_req);
-
- if (!(pxx_req & domain->bits.pxx))
- break;
-
- if (time_after(jiffies, deadline)) {
- dev_err(domain->dev, "falied to command PGC\n");
- ret = -ETIMEDOUT;
- /*
- * If we were in a process of enabling a
- * domain and failed we might as well disable
- * the regulator we just enabled. And if it
- * was the opposite situation and we failed to
- * power down -- keep the regulator on
- */
- on = !on;
- break;
- }
-
- cpu_relax();
+ ret = regmap_read_poll_timeout(domain->regmap, offset, pxx_req,
+ !(pxx_req & domain->bits.pxx),
+ 0, USEC_PER_MSEC);
+ if (ret) {
+ dev_err(domain->dev, "failed to command PGC\n");
+ /*
+ * If we were in a process of enabling a
+ * domain and failed we might as well disable
+ * the regulator we just enabled. And if it
+ * was the opposite situation and we failed to
+ * power down -- keep the regulator on
+ */
+ on = !on;
}
if (enable_power_control)
--
2.20.1
Powered by blists - more mailing lists