| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190220165013.12774-1-axel.lin@ingics.com>
Date: Thu, 21 Feb 2019 00:50:13 +0800
From: Axel Lin <axel.lin@...ics.com>
To: Mark Brown <broonie@...nel.org>
Cc: Chen-Yu Tsai <wens@...e.org>,
Olliver Schinagl <oliver@...inagl.nl>,
Priit Laes <plaes@...es.org>,
Liam Girdwood <lgirdwood@...il.com>,
linux-kernel@...r.kernel.org, Axel Lin <axel.lin@...ics.com>
Subject: [PATCH] regulator: axp20x: Get rid of AXP20X_xxx_START/END/STEPS defines
The AXP20X_xxx_START/END/STEPS defines make the code hard to read and
very hard to check the linear range settings because it needs to check
the defines one-by-one.
The original code without the defines is very good in readability
as the meaning of each field of REGULATOR_LINEAR_RANGE is clear.
So I suggest to get rid of AXP20X_xxx_START/END/STEPS defines.
Signed-off-by: Axel Lin <axel.lin@...ics.com>
---
drivers/regulator/axp20x-regulator.c | 176 +++------------------------
1 file changed, 19 insertions(+), 157 deletions(-)
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index fba8f58ab769..46b5de53d1a3 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -64,26 +64,6 @@
#define AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN_MASK BIT_MASK(3)
#define AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN BIT(3)
-#define AXP20X_LDO4_V_OUT_1250mV_START 0x0
-#define AXP20X_LDO4_V_OUT_1250mV_STEPS 0
-#define AXP20X_LDO4_V_OUT_1250mV_END \
- (AXP20X_LDO4_V_OUT_1250mV_START + AXP20X_LDO4_V_OUT_1250mV_STEPS)
-#define AXP20X_LDO4_V_OUT_1300mV_START 0x1
-#define AXP20X_LDO4_V_OUT_1300mV_STEPS 7
-#define AXP20X_LDO4_V_OUT_1300mV_END \
- (AXP20X_LDO4_V_OUT_1300mV_START + AXP20X_LDO4_V_OUT_1300mV_STEPS)
-#define AXP20X_LDO4_V_OUT_2500mV_START 0x9
-#define AXP20X_LDO4_V_OUT_2500mV_STEPS 0
-#define AXP20X_LDO4_V_OUT_2500mV_END \
- (AXP20X_LDO4_V_OUT_2500mV_START + AXP20X_LDO4_V_OUT_2500mV_STEPS)
-#define AXP20X_LDO4_V_OUT_2700mV_START 0xa
-#define AXP20X_LDO4_V_OUT_2700mV_STEPS 1
-#define AXP20X_LDO4_V_OUT_2700mV_END \
- (AXP20X_LDO4_V_OUT_2700mV_START + AXP20X_LDO4_V_OUT_2700mV_STEPS)
-#define AXP20X_LDO4_V_OUT_3000mV_START 0xc
-#define AXP20X_LDO4_V_OUT_3000mV_STEPS 3
-#define AXP20X_LDO4_V_OUT_3000mV_END \
- (AXP20X_LDO4_V_OUT_3000mV_START + AXP20X_LDO4_V_OUT_3000mV_STEPS)
#define AXP20X_LDO4_V_OUT_NUM_VOLTAGES 16
#define AXP22X_IO_ENABLED 0x03
@@ -156,44 +136,9 @@
#define AXP803_DCDC23_POLYPHASE_DUAL BIT(6)
#define AXP803_DCDC56_POLYPHASE_DUAL BIT(5)
-#define AXP803_DCDC234_500mV_START 0x00
-#define AXP803_DCDC234_500mV_STEPS 70
-#define AXP803_DCDC234_500mV_END \
- (AXP803_DCDC234_500mV_START + AXP803_DCDC234_500mV_STEPS)
-#define AXP803_DCDC234_1220mV_START 0x47
-#define AXP803_DCDC234_1220mV_STEPS 4
-#define AXP803_DCDC234_1220mV_END \
- (AXP803_DCDC234_1220mV_START + AXP803_DCDC234_1220mV_STEPS)
#define AXP803_DCDC234_NUM_VOLTAGES 76
-
-#define AXP803_DCDC5_800mV_START 0x00
-#define AXP803_DCDC5_800mV_STEPS 32
-#define AXP803_DCDC5_800mV_END \
- (AXP803_DCDC5_800mV_START + AXP803_DCDC5_800mV_STEPS)
-#define AXP803_DCDC5_1140mV_START 0x21
-#define AXP803_DCDC5_1140mV_STEPS 35
-#define AXP803_DCDC5_1140mV_END \
- (AXP803_DCDC5_1140mV_START + AXP803_DCDC5_1140mV_STEPS)
#define AXP803_DCDC5_NUM_VOLTAGES 68
-
-#define AXP803_DCDC6_600mV_START 0x00
-#define AXP803_DCDC6_600mV_STEPS 50
-#define AXP803_DCDC6_600mV_END \
- (AXP803_DCDC6_600mV_START + AXP803_DCDC6_600mV_STEPS)
-#define AXP803_DCDC6_1120mV_START 0x33
-#define AXP803_DCDC6_1120mV_STEPS 14
-#define AXP803_DCDC6_1120mV_END \
- (AXP803_DCDC6_1120mV_START + AXP803_DCDC6_1120mV_STEPS)
#define AXP803_DCDC6_NUM_VOLTAGES 72
-
-#define AXP803_DLDO2_700mV_START 0x00
-#define AXP803_DLDO2_700mV_STEPS 26
-#define AXP803_DLDO2_700mV_END \
- (AXP803_DLDO2_700mV_START + AXP803_DLDO2_700mV_STEPS)
-#define AXP803_DLDO2_3400mV_START 0x1b
-#define AXP803_DLDO2_3400mV_STEPS 4
-#define AXP803_DLDO2_3400mV_END \
- (AXP803_DLDO2_3400mV_START + AXP803_DLDO2_3400mV_STEPS)
#define AXP803_DLDO2_NUM_VOLTAGES 32
#define AXP806_DCDCA_V_CTRL_MASK GENMASK(6, 0)
@@ -235,34 +180,8 @@
#define AXP806_DCDCDE_POLYPHASE_DUAL BIT(5)
-#define AXP806_DCDCA_600mV_START 0x00
-#define AXP806_DCDCA_600mV_STEPS 50
-#define AXP806_DCDCA_600mV_END \
- (AXP806_DCDCA_600mV_START + AXP806_DCDCA_600mV_STEPS)
-#define AXP806_DCDCA_1120mV_START 0x33
-#define AXP806_DCDCA_1120mV_STEPS 14
-#define AXP806_DCDCA_1120mV_END \
- (AXP806_DCDCA_1120mV_START + AXP806_DCDCA_1120mV_STEPS)
#define AXP806_DCDCA_NUM_VOLTAGES 72
-
-#define AXP806_DCDCD_600mV_START 0x00
-#define AXP806_DCDCD_600mV_STEPS 45
-#define AXP806_DCDCD_600mV_END \
- (AXP806_DCDCD_600mV_START + AXP806_DCDCD_600mV_STEPS)
-#define AXP806_DCDCD_1600mV_START 0x2e
-#define AXP806_DCDCD_1600mV_STEPS 17
-#define AXP806_DCDCD_1600mV_END \
- (AXP806_DCDCD_1600mV_START + AXP806_DCDCD_1600mV_STEPS)
#define AXP806_DCDCD_NUM_VOLTAGES 64
-
-#define AXP809_DCDC4_600mV_START 0x00
-#define AXP809_DCDC4_600mV_STEPS 47
-#define AXP809_DCDC4_600mV_END \
- (AXP809_DCDC4_600mV_START + AXP809_DCDC4_600mV_STEPS)
-#define AXP809_DCDC4_1800mV_START 0x30
-#define AXP809_DCDC4_1800mV_STEPS 8
-#define AXP809_DCDC4_1800mV_END \
- (AXP809_DCDC4_1800mV_START + AXP809_DCDC4_1800mV_STEPS)
#define AXP809_DCDC4_NUM_VOLTAGES 57
#define AXP813_DCDC7_V_OUT_MASK GENMASK(6, 0)
@@ -517,26 +436,11 @@ static const struct regulator_ops axp20x_ops_sw = {
};
static const struct regulator_linear_range axp20x_ldo4_ranges[] = {
- REGULATOR_LINEAR_RANGE(1250000,
- AXP20X_LDO4_V_OUT_1250mV_START,
- AXP20X_LDO4_V_OUT_1250mV_END,
- 0),
- REGULATOR_LINEAR_RANGE(1300000,
- AXP20X_LDO4_V_OUT_1300mV_START,
- AXP20X_LDO4_V_OUT_1300mV_END,
- 100000),
- REGULATOR_LINEAR_RANGE(2500000,
- AXP20X_LDO4_V_OUT_2500mV_START,
- AXP20X_LDO4_V_OUT_2500mV_END,
- 0),
- REGULATOR_LINEAR_RANGE(2700000,
- AXP20X_LDO4_V_OUT_2700mV_START,
- AXP20X_LDO4_V_OUT_2700mV_END,
- 100000),
- REGULATOR_LINEAR_RANGE(3000000,
- AXP20X_LDO4_V_OUT_3000mV_START,
- AXP20X_LDO4_V_OUT_3000mV_END,
- 100000),
+ REGULATOR_LINEAR_RANGE(1250000, 0x0, 0x0, 0),
+ REGULATOR_LINEAR_RANGE(1300000, 0x1, 0x8, 100000),
+ REGULATOR_LINEAR_RANGE(2500000, 0x9, 0x9, 0),
+ REGULATOR_LINEAR_RANGE(2700000, 0xa, 0xb, 100000),
+ REGULATOR_LINEAR_RANGE(3000000, 0xc, 0xf, 100000),
};
static const struct regulator_desc axp20x_regulators[] = {
@@ -645,48 +549,24 @@ static const struct regulator_desc axp22x_drivevbus_regulator = {
/* DCDC ranges shared with AXP813 */
static const struct regulator_linear_range axp803_dcdc234_ranges[] = {
- REGULATOR_LINEAR_RANGE(500000,
- AXP803_DCDC234_500mV_START,
- AXP803_DCDC234_500mV_END,
- 10000),
- REGULATOR_LINEAR_RANGE(1220000,
- AXP803_DCDC234_1220mV_START,
- AXP803_DCDC234_1220mV_END,
- 20000),
+ REGULATOR_LINEAR_RANGE(500000, 0x0, 0x46, 10000),
+ REGULATOR_LINEAR_RANGE(1220000, 0x47, 0x4b, 20000),
};
static const struct regulator_linear_range axp803_dcdc5_ranges[] = {
- REGULATOR_LINEAR_RANGE(800000,
- AXP803_DCDC5_800mV_START,
- AXP803_DCDC5_800mV_END,
- 10000),
- REGULATOR_LINEAR_RANGE(1140000,
- AXP803_DCDC5_1140mV_START,
- AXP803_DCDC5_1140mV_END,
- 20000),
+ REGULATOR_LINEAR_RANGE(800000, 0x0, 0x20, 10000),
+ REGULATOR_LINEAR_RANGE(1140000, 0x21, 0x44, 20000),
};
static const struct regulator_linear_range axp803_dcdc6_ranges[] = {
- REGULATOR_LINEAR_RANGE(600000,
- AXP803_DCDC6_600mV_START,
- AXP803_DCDC6_600mV_END,
- 10000),
- REGULATOR_LINEAR_RANGE(1120000,
- AXP803_DCDC6_1120mV_START,
- AXP803_DCDC6_1120mV_END,
- 20000),
+ REGULATOR_LINEAR_RANGE(600000, 0x0, 0x32, 10000),
+ REGULATOR_LINEAR_RANGE(1120000, 0x33, 0x47, 20000),
};
/* AXP806's CLDO2 and AXP809's DLDO1 share the same range */
static const struct regulator_linear_range axp803_dldo2_ranges[] = {
- REGULATOR_LINEAR_RANGE(700000,
- AXP803_DLDO2_700mV_START,
- AXP803_DLDO2_700mV_END,
- 100000),
- REGULATOR_LINEAR_RANGE(3400000,
- AXP803_DLDO2_3400mV_START,
- AXP803_DLDO2_3400mV_END,
- 200000),
+ REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000),
+ REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000),
};
static const struct regulator_desc axp803_regulators[] = {
@@ -765,25 +645,13 @@ static const struct regulator_desc axp803_regulators[] = {
};
static const struct regulator_linear_range axp806_dcdca_ranges[] = {
- REGULATOR_LINEAR_RANGE(600000,
- AXP806_DCDCA_600mV_START,
- AXP806_DCDCA_600mV_END,
- 10000),
- REGULATOR_LINEAR_RANGE(1120000,
- AXP806_DCDCA_1120mV_START,
- AXP806_DCDCA_1120mV_END,
- 20000),
+ REGULATOR_LINEAR_RANGE(600000, 0x0, 0x32, 10000),
+ REGULATOR_LINEAR_RANGE(1120000, 0x33, 0x47, 20000),
};
static const struct regulator_linear_range axp806_dcdcd_ranges[] = {
- REGULATOR_LINEAR_RANGE(600000,
- AXP806_DCDCD_600mV_START,
- AXP806_DCDCD_600mV_END,
- 20000),
- REGULATOR_LINEAR_RANGE(1600000,
- AXP806_DCDCD_600mV_START,
- AXP806_DCDCD_600mV_END,
- 100000),
+ REGULATOR_LINEAR_RANGE(600000, 0x0, 0x2d, 20000),
+ REGULATOR_LINEAR_RANGE(1600000, 0x2e, 0x3f, 100000),
};
static const struct regulator_desc axp806_regulators[] = {
@@ -841,14 +709,8 @@ static const struct regulator_desc axp806_regulators[] = {
};
static const struct regulator_linear_range axp809_dcdc4_ranges[] = {
- REGULATOR_LINEAR_RANGE(600000,
- AXP809_DCDC4_600mV_START,
- AXP809_DCDC4_600mV_END,
- 20000),
- REGULATOR_LINEAR_RANGE(1800000,
- AXP809_DCDC4_1800mV_START,
- AXP809_DCDC4_1800mV_END,
- 100000),
+ REGULATOR_LINEAR_RANGE(600000, 0x0, 0x2f, 20000),
+ REGULATOR_LINEAR_RANGE(1800000, 0x30, 0x38, 100000),
};
static const struct regulator_desc axp809_regulators[] = {
--
2.17.1
Powered by blists - more mailing lists