linux-kernel - [PATCH v7 0/2] PWM support for HiFive Unleashed

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1550740301-10097-1-git-send-email-yash.shah@sifive.com>
Date:   Thu, 21 Feb 2019 14:41:39 +0530
From:   Yash Shah <yash.shah@...ive.com>
To:     palmer@...ive.com, linux-pwm@...r.kernel.org,
        linux-riscv@...ts.infradead.org
Cc:     thierry.reding@...il.com, robh+dt@...nel.org, mark.rutland@....com,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        sachin.ghadi@...ive.com, paul.walmsley@...ive.com,
        Yash Shah <yash.shah@...ive.com>
Subject: [PATCH v7 0/2] PWM support for HiFive Unleashed

This patch series adds a PWM driver and DT documentation
for HiFive Unleashed board. The patches are mostly based on
Wesley's patch.

v7
- Modify description of compatible property in DT documentation
- Use mutex locks at appropriate places
- Fix all bad line breaks
- Allow enabling/disabling PWM only when the user is the only active user
- Remove Deglitch logic
- Other minor fixes

v6
- Remove the global property 'sifive,period-ns'
- Implement free and request callbacks to maintain user counts.
- Add user_count member to struct pwm_sifive_ddata
- Allow period change only if user_count is one
- Add pwm_sifive_enable function to enable/disable PWM
- Change calculation logic of frac (in pwm_sifive_apply)
- Remove state correction
- Remove pwm_sifive_xlate function
- Clock to be enabled only when PWM is enabled
- Other minor fixes

v5
- Correct the order of compatible string properties
- PWM state correction to be done always
- Other minor fixes based upon feedback on v4

v4
- Rename macros with appropriate names
- Remove unused macros
- Rename struct sifive_pwm_device to struct pwm_sifive_ddata
- Rename function prefix as per driver name
- Other minor fixes based upon feedback on v3

v3
- Add a link to the reference manaul
- Use appropriate apis for division operation
- Add check for polarity
- Enable clk before calling clk_get_rate
- Other minor fixes based upon feedback on v2

V2 changed from V1:
- Remove inclusion of dt-bindings/pwm/pwm.h
- Remove artificial alignments
- Replace ioread32/iowrite32 with readl/writel
- Remove camelcase
- Change dev_info to dev_dbg for unnecessary log
- Correct typo in driver name
- Remove use of of_match_ptr macro
- Update the DT compatible strings and Add reference to a common
  versioning document

Yash Shah (2):
  pwm: sifive: Add DT documentation for SiFive PWM Controller
  pwm: sifive: Add a driver for SiFive SoC PWM

 .../devicetree/bindings/pwm/pwm-sifive.txt         |  33 ++
 drivers/pwm/Kconfig                                |  11 +
 drivers/pwm/Makefile                               |   1 +
 drivers/pwm/pwm-sifive.c                           | 346 +++++++++++++++++++++
 4 files changed, 391 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/pwm-sifive.txt
 create mode 100644 drivers/pwm/pwm-sifive.c

-- 
1.9.1