lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190221101518.22604-5-kishon@ti.com>
Date:   Thu, 21 Feb 2019 15:45:13 +0530
From:   Kishon Vijay Abraham I <kishon@...com>
To:     Murali Karicheri <m-karicheri2@...com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>
CC:     Kishon Vijay Abraham I <kishon@...com>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Jingoo Han <jingoohan1@...il.com>,
        Gustavo Pimentel <gustavo.pimentel@...opsys.com>,
        <linux-pci@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH v4 4/9] PCI: keystone: Use hwirq to get the MSI IRQ number offset

ks_pcie_msi_irq_handler() uses 'virq' to get the IRQ number offset.
This offset is used to get the correct MSI_IRQ_STATUS register
corresponding to the IRQ line that raised the interrupt.
There is no guarantee that 'virq' assigned for consecutive hardware
IRQ will be contiguous. And this might get us an incorrect IRQ number
offset.

Fix it here by using 'hwirq' to get the IRQ number offset. Since we
don't store the 'virq' numbers of all the IRQ numbers, stop checking
if irq count is greater than MAX_MSI_HOST_IRQS and remove
MAX_MSI_HOST_IRQS.

Link: https://lkml.kernel.org/r/bb081d21-7c03-0357-4294-7e92d95d838c@arm.com
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 24 ++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 7f1648453f54..0ebb8622fddb 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -75,7 +75,6 @@
 #define ERR_IRQ_ALL			(ERR_AER | ERR_AXI | ERR_CORR | \
 					 ERR_NONFATAL | ERR_FATAL | ERR_SYS)
 
-#define MAX_MSI_HOST_IRQS		8
 /* PCIE controller device IDs */
 #define PCIE_RC_K2HK			0xb008
 #define PCIE_RC_K2E			0xb009
@@ -90,7 +89,7 @@ struct keystone_pcie {
 	u32			device_id;
 	struct			device_node *legacy_intc_np;
 
-	int			msi_host_irqs[MAX_MSI_HOST_IRQS];
+	int			msi_host_irq;
 	int			num_lanes;
 	u32			num_viewport;
 	struct phy		**phy;
@@ -610,9 +609,9 @@ static int ks_pcie_establish_link(struct keystone_pcie *ks_pcie)
 
 static void ks_pcie_msi_irq_handler(struct irq_desc *desc)
 {
-	unsigned int irq = irq_desc_get_irq(desc);
+	unsigned int irq = desc->irq_data.hwirq;
 	struct keystone_pcie *ks_pcie = irq_desc_get_handler_data(desc);
-	u32 offset = irq - ks_pcie->msi_host_irqs[0];
+	u32 offset = irq - ks_pcie->msi_host_irq;
 	struct dw_pcie *pci = ks_pcie->pci;
 	struct device *dev = pci->dev;
 	struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -634,6 +633,7 @@ static int ks_pcie_config_msi_irq(struct keystone_pcie *ks_pcie)
 	struct device *dev = ks_pcie->pci->dev;
 	struct device_node *np = ks_pcie->np;
 	struct device_node *intc_np;
+	struct irq_data *irq_data;
 	int irq_count, irq, ret, i;
 
 	if (!IS_ENABLED(CONFIG_PCI_MSI))
@@ -652,19 +652,21 @@ static int ks_pcie_config_msi_irq(struct keystone_pcie *ks_pcie)
 		goto err;
 	}
 
-	if (irq_count > MAX_MSI_HOST_IRQS) {
-		dev_warn(dev, "Too many MSI interrupt lines defined %u\n",
-			 irq_count);
-		irq_count = MAX_MSI_HOST_IRQS;
-	}
-
 	for (i = 0; i < irq_count; i++) {
 		irq = irq_of_parse_and_map(intc_np, i);
 		if (!irq) {
 			ret = -EINVAL;
 			goto err;
 		}
-		ks_pcie->msi_host_irqs[i] = irq;
+
+		if (!ks_pcie->msi_host_irq) {
+			irq_data = irq_get_irq_data(irq);
+			if (!irq_data) {
+				ret = -EINVAL;
+				goto err;
+			}
+			ks_pcie->msi_host_irq = irq_data->hwirq;
+		}
 
 		irq_set_chained_handler_and_data(irq, ks_pcie_msi_irq_handler,
 						 ks_pcie);
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ