linux-kernel - RE: [PATCH v4 2/2] usb: chipidea: Refactor USB PHY selection and keep a single PHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Fri, 22 Feb 2019 09:40:47 +0000
From:   Peter Chen <peter.chen@....com>
To:     Paul Kocialkowski <paul.kocialkowski@...tlin.com>,
        "linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: RE: [PATCH v4 2/2] usb: chipidea: Refactor USB PHY selection and keep
 a single PHY

 
> 
> Refactor the code in charge of looking up the USB PHY when no platdata is
> provided. Attempt to get a generic USB PHY first, then look for a legacy USB PHY
> through device-tree and finally get any registered PHY with the correct type.
> 
> This way, only a single USB PHY is obtained and the flow is easier to understand
> and follow.
> 
> All error pointers (except for EPROBE_DEFER) are considered as PHY not found.
> 
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@...tlin.com>
> ---
>  drivers/usb/chipidea/core.c | 49 ++++++++++++++++++++++++-------------
>  1 file changed, 32 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index
> 016e4004fe9d..27749ace2d93 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -954,32 +954,47 @@ static int ci_hdrc_probe(struct platform_device *pdev)
>  	} else if (ci->platdata->usb_phy) {
>  		ci->usb_phy = ci->platdata->usb_phy;
>  	} else {
> -		ci->usb_phy = devm_usb_get_phy_by_phandle(dev->parent, "phys",
> -							  0);
> +		/* Look for a generic PHY first */
>  		ci->phy = devm_phy_get(dev->parent, "usb-phy");
> 
> -		/* Fallback to grabbing any registered USB2 PHY */
> -		if (IS_ERR(ci->usb_phy) &&
> -		    PTR_ERR(ci->usb_phy) != -EPROBE_DEFER)
> +		if (PTR_ERR(ci->phy) == -EPROBE_DEFER) {
> +			ret = -EPROBE_DEFER;
> +			goto ulpi_exit;
> +		} else if (IS_ERR(ci->phy)) {
> +			ci->phy = NULL;
> +		}
> +
> +		/* Look for a legacy USB PHY from device-tree next */
> +		if (!ci->phy) {
> +			ci->usb_phy = devm_usb_get_phy_by_phandle(dev->parent,
> +								  "phys", 0);
> +
> +			if (PTR_ERR(ci->usb_phy) == -EPROBE_DEFER) {
> +				ret = -EPROBE_DEFER;
> +				goto ulpi_exit;
> +			} else if (IS_ERR(ci->usb_phy)) {
> +				ci->usb_phy = NULL;
> +			}
> +		}
> +
> +		/* Look for any registered legacy USB PHY as last resort */
> +		if (!ci->phy && !ci->usb_phy) {
>  			ci->usb_phy = devm_usb_get_phy(dev->parent,
>  						       USB_PHY_TYPE_USB2);
> 
> -		/* if both generic PHY and USB PHY layers aren't enabled */
> -		if (PTR_ERR(ci->phy) == -ENOSYS &&
> -				PTR_ERR(ci->usb_phy) == -ENXIO) {
> -			ret = -ENXIO;
> -			goto ulpi_exit;
> +			if (PTR_ERR(ci->usb_phy) == -EPROBE_DEFER) {
> +				ret = -EPROBE_DEFER;
> +				goto ulpi_exit;
> +			} else if (IS_ERR(ci->usb_phy)) {
> +				ci->usb_phy = NULL;
> +			}
>  		}
> 
> -		if (IS_ERR(ci->phy) && IS_ERR(ci->usb_phy)) {
> -			ret = -EPROBE_DEFER;
> +		/* No USB PHY was found in the end */
> +		if (!ci->phy && !ci->usb_phy) {
> +			ret = -ENXIO;
>  			goto ulpi_exit;
>  		}
> -
> -		if (IS_ERR(ci->phy))
> -			ci->phy = NULL;
> -		else if (IS_ERR(ci->usb_phy))
> -			ci->usb_phy = NULL;
>  	}
> 
 
This patch should work, I will queue it if test is ok.

Peter