[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190222095656.gl3j46tqtlinhfbr@M43218.corp.atmel.com>
Date: Fri, 22 Feb 2019 10:56:56 +0100
From: Ludovic Desroches <ludovic.desroches@...rochip.com>
To: <g.ottinger@...tec.at>
CC: Alexandre Belloni <alexandre.belloni@...tlin.com>,
Lars-Peter Clausen <lars@...afoo.de>,
Kees Cook <keescook@...omium.org>,
Ard Biesheuvel <ard.biesheuvel@...aro.org>,
<linux-iio@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
"Peter Meerwald-Stadler" <pmeerw@...erw.net>,
Hartmut Knaack <knaack.h@....de>,
<eugen.hristev@...rochip.com>, <s.etzlstorfer@...tec.at>,
"David S. Miller" <davem@...emloft.net>,
Jonathan Cameron <jic23@...nel.org>
Subject: Re: [PATCH] iio: adc: at91: disable adc channel interrupt in timeout
case
On Wed, Jan 30, 2019 at 02:42:02PM +0100, g.ottinger@...tec.at wrote:
> From: Georg Ottinger <g.ottinger@...tec.at>
>
> Having a brief look at at91_adc_read_raw() it is obvious that in the case
> of a timeout the setting of AT91_ADC_CHDR and AT91_ADC_IDR registers is
> omitted. If 2 different channels are queried we can end up with a
> situation where two interrupts are enabled, but only one interrupt is
> cleared in the interrupt handler. Resulting in a interrupt loop and a
> system hang.
>
> Signed-off-by: Georg Ottinger <g.ottinger@...tec.at>
Acked-by: Ludovic Desroches <ludovic.desroches@...rochip.com>
Thanks
> ---
> drivers/iio/adc/at91_adc.c | 28 +++++++++++++++++-----------
> 1 file changed, 17 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
> index 75d2f7358..596841a3c 100644
> --- a/drivers/iio/adc/at91_adc.c
> +++ b/drivers/iio/adc/at91_adc.c
> @@ -704,23 +704,29 @@ static int at91_adc_read_raw(struct iio_dev *idev,
> ret = wait_event_interruptible_timeout(st->wq_data_avail,
> st->done,
> msecs_to_jiffies(1000));
> - if (ret == 0)
> - ret = -ETIMEDOUT;
> - if (ret < 0) {
> - mutex_unlock(&st->lock);
> - return ret;
> - }
> -
> - *val = st->last_value;
>
> + /* Disable interrupts, regardless if adc conversion was
> + * successful or not
> + */
> at91_adc_writel(st, AT91_ADC_CHDR,
> AT91_ADC_CH(chan->channel));
> at91_adc_writel(st, AT91_ADC_IDR, BIT(chan->channel));
>
> - st->last_value = 0;
> - st->done = false;
> + if (ret > 0) {
> + /* a valid conversion took place */
> + *val = st->last_value;
> + st->last_value = 0;
> + st->done = false;
> + ret = IIO_VAL_INT;
> + } else if (ret == 0) {
> + /* conversion timeout */
> + dev_err(&idev->dev, "ADC Channel %d timeout.\n",
> + chan->channel);
> + ret = -ETIMEDOUT;
> + }
> +
> mutex_unlock(&st->lock);
> - return IIO_VAL_INT;
> + return ret;
>
> case IIO_CHAN_INFO_SCALE:
> *val = st->vref_mv;
> --
> 2.17.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Powered by blists - more mailing lists