linux-kernel - Re: [PATCH V3 2/2] hwmon: pwm-fan: Add optional regulator support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20190223170337.GA14857@roeck-us.net>
Date:   Sat, 23 Feb 2019 09:03:37 -0800
From:   Guenter Roeck <linux@...ck-us.net>
To:     Stefan Wahren <stefan.wahren@...e.com>
Cc:     Kamil Debski <kamil@...as.org>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
        Jean Delvare <jdelvare@...e.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        linux-hwmon@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH V3 2/2] hwmon: pwm-fan: Add optional regulator support

On Fri, Feb 22, 2019 at 02:45:24PM +0100, Stefan Wahren wrote:
> This adds optional regulator support to the pwm-fan driver. This is
> necessary for pwm fans which are powered by a switchable supply.
> 
> Signed-off-by: Stefan Wahren <stefan.wahren@...e.com>

Applied to hwmon-next.

Thanks,
Guenter

> ---
>  drivers/hwmon/pwm-fan.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 42 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
> index 2c94482..167221c 100644
> --- a/drivers/hwmon/pwm-fan.c
> +++ b/drivers/hwmon/pwm-fan.c
> @@ -23,6 +23,7 @@
>  #include <linux/of.h>
>  #include <linux/platform_device.h>
>  #include <linux/pwm.h>
> +#include <linux/regulator/consumer.h>
>  #include <linux/sysfs.h>
>  #include <linux/thermal.h>
>  
> @@ -31,6 +32,7 @@
>  struct pwm_fan_ctx {
>  	struct mutex lock;
>  	struct pwm_device *pwm;
> +	struct regulator *reg_en;
>  	unsigned int pwm_value;
>  	unsigned int pwm_fan_state;
>  	unsigned int pwm_fan_max_state;
> @@ -231,6 +233,21 @@ static int pwm_fan_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, ctx);
>  
> +	ctx->reg_en = devm_regulator_get_optional(&pdev->dev, "fan");
> +	if (IS_ERR(ctx->reg_en)) {
> +		if (PTR_ERR(ctx->reg_en) != -ENODEV)
> +			return PTR_ERR(ctx->reg_en);
> +
> +		ctx->reg_en = NULL;
> +	} else {
> +		ret = regulator_enable(ctx->reg_en);
> +		if (ret) {
> +			dev_err(&pdev->dev,
> +				"Failed to enable fan supply: %d\n", ret);
> +			return ret;
> +		}
> +	}
> +
>  	ctx->pwm_value = MAX_PWM;
>  
>  	/* Set duty cycle to maximum allowed and enable PWM output */
> @@ -241,7 +258,7 @@ static int pwm_fan_probe(struct platform_device *pdev)
>  	ret = pwm_apply_state(ctx->pwm, &state);
>  	if (ret) {
>  		dev_err(&pdev->dev, "Failed to configure PWM\n");
> -		return ret;
> +		goto err_reg_disable;
>  	}
>  
>  	hwmon = devm_hwmon_device_register_with_groups(&pdev->dev, "pwmfan",
> @@ -277,6 +294,10 @@ static int pwm_fan_probe(struct platform_device *pdev)
>  	state.enabled = false;
>  	pwm_apply_state(ctx->pwm, &state);
>  
> +err_reg_disable:
> +	if (ctx->reg_en)
> +		regulator_disable(ctx->reg_en);
> +
>  	return ret;
>  }
>  
> @@ -287,6 +308,10 @@ static int pwm_fan_remove(struct platform_device *pdev)
>  	thermal_cooling_device_unregister(ctx->cdev);
>  	if (ctx->pwm_value)
>  		pwm_disable(ctx->pwm);
> +
> +	if (ctx->reg_en)
> +		regulator_disable(ctx->reg_en);
> +
>  	return 0;
>  }
>  
> @@ -307,6 +332,14 @@ static int pwm_fan_suspend(struct device *dev)
>  		pwm_disable(ctx->pwm);
>  	}
>  
> +	if (ctx->reg_en) {
> +		ret = regulator_disable(ctx->reg_en);
> +		if (ret) {
> +			dev_err(dev, "Failed to disable fan supply: %d\n", ret);
> +			return ret;
> +		}
> +	}
> +
>  	return 0;
>  }
>  
> @@ -317,6 +350,14 @@ static int pwm_fan_resume(struct device *dev)
>  	unsigned long duty;
>  	int ret;
>  
> +	if (ctx->reg_en) {
> +		ret = regulator_enable(ctx->reg_en);
> +		if (ret) {
> +			dev_err(dev, "Failed to enable fan supply: %d\n", ret);
> +			return ret;
> +		}
> +	}
> +
>  	if (ctx->pwm_value == 0)
>  		return 0;
>