linux-kernel - Re: [PATCH] mfd: twl-core: disable irq while suspended

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190223182323.GA39872@atomide.com>
Date:   Sat, 23 Feb 2019 10:23:23 -0800
From:   Tony Lindgren <tony@...mide.com>
To:     Andreas Kemnade <andreas@...nade.info>
Cc:     lee.jones@...aro.org, linux-omap@...r.kernel.org,
        linux-kernel@...r.kernel.org, Wolfram Sang <wsa@...-dreams.de>,
        linux-i2c@...r.kernel.org, Dave Gerlach <d-gerlach@...com>,
        Grygorii Strashko <grygorii.strashko@...com>,
        Keerthy <j-keerthy@...com>, Tero Kristo <t-kristo@...com>,
        letux-kernel@...nphoenux.org
Subject: Re: [PATCH] mfd: twl-core: disable irq while suspended

* Andreas Kemnade <andreas@...nade.info> [190223 11:48]:
> Since commit
> 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend")
> on gta04 we have handle_twl4030_pih() called in situations where pm_runtime_get()
> in i2c-omap.c returns -EACCES.
> [   86.474365] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
> [   86.485473] printk: Suspending console(s) (use no_console_suspend to debug)
> [   86.555572] Disabling non-boot CPUs ...
> [   86.555664] Successfully put all powerdomains to target state
> [   86.563720] twl: Read failed (mod 1, reg 0x01 count 1)
> [   86.563751] twl4030: I2C error -13 reading PIH ISR
> [   86.563812] twl: Read failed (mod 1, reg 0x01 count 1)
> [   86.563812] twl4030: I2C error -13 reading PIH ISR
> [   86.563873] twl: Read failed (mod 1, reg 0x01 count 1)
> [   86.563903] twl4030: I2C error -13 reading PIH ISR
> 
> This happens when we wakeup via something behing twl4030
> (powerbutton or rtc alarm).
> This goes on for minutes until the system is finally resumed.
> Disable the irq on suspend and enable it on resume to avoid
> having i2c access problems when the irq registers are checked.

Thanks for fixing this, still works fine for me for rtcwake:

Tested-by: Tony Lindgren <tony@...mide.com>