linux-kernel - Re: [PATCH 2/3] Bluetooth: hci_qca: Move boot delay to qca_send_power

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <c4f0563baa3b61a3bd1725d71517495e@codeaurora.org>
Date:   Tue, 26 Feb 2019 17:48:45 +0530
From:   Balakrishna Godavarthi <bgodavar@...eaurora.org>
To:     Matthias Kaehlcke <mka@...omium.org>
Cc:     Marcel Holtmann <marcel@...tmann.org>,
        Johan Hedberg <johan.hedberg@...il.com>,
        linux-bluetooth@...r.kernel.org, linux-kernel@...r.kernel.org,
        hemantg@...eaurora.org
Subject: Re: [PATCH 2/3] Bluetooth: hci_qca: Move boot delay to
 qca_send_power_pulse()

On 2019-02-26 05:19, Matthias Kaehlcke wrote:
> After sending a power on pulse the driver has a delay of 100ms
> to allow the host controller to boot. Move the delay into
> qca_send_power_pulse(), since it is directly related with the
> power-on pulse.
> 
> Signed-off-by: Matthias Kaehlcke <mka@...omium.org>
> ---
>  drivers/bluetooth/hci_qca.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index e4128774e9686..eacc108c422d0 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1036,6 +1036,9 @@ static int qca_send_power_pulse(struct hci_uart
> *hu, bool on)
>  	usleep_range(100, 200);
>  	hci_uart_set_flow_control(hu, false);
> 
> +	if (on)
> +		msleep(100);
> +
>  	return 0;
>  }
> 
> @@ -1148,9 +1151,6 @@ static int qca_wcn3990_init(struct hci_uart *hu)
>  	if (ret)
>  		return ret;
> 
> -	/* Wait for 100 ms for SoC to boot */
> -	msleep(100);
> -
>  	/* Now the device is in ready state to communicate with host.
>  	 * To sync host with device we need to reopen port.
>  	 * Without this, we will have RTS and CTS synchronization

Reviewed-by: Balakrishna Godavarthi <bgodavar@...eaurora.org>

-- 
Regards
Balakrishna.